Skip to content
ORDERS SHIP FREE TO THE 48 CONTIGUOUS STATES
ORDERS SHIP FREE TO THE 48 CONTIGUOUS STATES
CALL OUR OFFICE (817) 865-3707 | EMAIL OUR TEAM
Challenger SA10 10k 2-Post; Symmetric/Asymmetric 3-Stage Front & 2-Stag Rear Arm, alamoequipment.com

SA10 10k 2-Post; Symmetric/Asymmetric 3-Stage Front & 2-Stag Rear Arm

SKU SA10

Lead time:

by Challenger
Save 36% Save 36%
$7,873.47
$7,873.47 - $7,873.47
$7,873.47
$5,039.02
$5,039.02 - $5,039.02
$5,039.02
Color: Blue

  • DESCRIPTION

    Challenger’s SA10 2-post lift offers 10,000 lb. capacity. You can install the SA10 in either symmetric or asymmetric position, depending on your service needs. The SA10 also features adjustable height and width options to further customize it to meet your needs. Innovative 3-stage front and 2-stage rear arms provide greater overall sweep.

    ALI® Certified

  • FEATURES + BENEFITS

    • 10,000 lb. lift capacity
    • 3-stage front arms provide greater sweep for versatility and ease of spotting
    • Can be installed in either symmetric or asymmetric position, depending on your service needs
    • Premium double telescoping screw pads adjust to multiple heights minimizing the need for adapters
    • Adjustable heights and widths provide versatility at installation for service facilities with special constraints
    • Single-point mechanical lock release system allows the technician to disengage both columns simultaneously
    • Padded overhead shut-off system prevents vehicle damage
    • Premium powder coat finish provides long-lasting durability
    • Plated arm restraints and arm pins inhibit rust and provide long-lasting durability
    • Standard dual integrated rubber door guards help protect vehicle panels from inadvertent damage

  • SPECIFICATIONS

    Model Number SA10
    Lifting Capacity 10,000 lbs.
    Lifting Configuration Symmetric
    Arms 3-stage front/2-stage rear
    Rise Height 74.5”
    Overall Height 136.5” / 142.5”
    Overall Height (Cylinder Extended) 142.5”
    2’ Height Extension Available Yes
    Overall Width 129” / 135”
    Drive-Thru Clearance 92.75” / 98.75”
    Floor to Overhead Switch 131.125” / 137.125”
    Front Arm Reach 22.375” / 41.5”
    Rear Arm Reach 38.25” / 59”
    Screw Pad Height 4.75" / 6.875"
    Inside Columns 106.75" / 112.75"
    Motor / Voltage 2HP, 208v-230v, 60Hz, 1Ph
    Speed of Rise 43 s
    ALI/ETL Certified Yes
    Ceiling Height Required 12'
    Color Blue

  • MANUAL + SPECS

Challenger Lifts, Inc. lifts are guaranteed to the original owner. CLI shall repair or replace, at CLI option, for the full warranty period those parts that prove upon inspection to be defective and pay for reasonable costs of transportation and/or labor for replacement of said parts for the warranty period stated below. This warranty shall not apply unless the product is installed, used and maintained according to CLI’s specifications set forth in CLI’s installation, operation and maintenance instructions. Use of any unapproved parts or accessories will void your warranty. This limited warranty extends only to the original purchaser and is not transferable. This warranty is valid only if the product has been registered with Challenger Lift, Inc., www.challengerlifts.com.

This warranty does not cover normal maintenance or adjustments, damage or malfunction caused by improper handling, installation, abuse, misuse, negligence, carelessness of operation, or normal wear and tear. In addition, this warranty does not cover equipment when repairs have been attempted or made by anyone other than a CLI authorized service representative.

This warranty is exclusive and is in lieu of all other warranties expressed or implied including any implied warranty of fitness for a particular purpose, which implied warranties are expressly excluded. No employee, agent, representative, dealer or other person or entity is authorized to give any warranties of any nature on behalf of CLI.

The remedies described are exclusive and in no event shall CLI, Inc. be liable for special, consequential or incidental damages for the breach of or delay in performance of the warranty. This warranty shall be governed by the Commonwealth of Kentucky, and shall be subject to the exclusive jurisdiction of the Court in the Commonwealth of Kentucky in the County of Jefferson. Functional parts are any wear items, as defined from time to time by Challenger Lifts. Examples include power units, cylinders, sheaves, hoses, cables, controls, etc. and may differ depending on the model of lift.

Structural parts are items, as defined from time to time by Challenger Lifts, Inc. that are not Functional Parts and include items like carriage, columns, arms, runways, plungers, etc. and may differ depending on the type of lift.

Note: WARRANTY CARD MUST BE COMPLETED AND RETURNED UPON INSTALLATION FOR VALIDATION or WARRANTY PERIOD WILL BEGIN FROM INVOICE DATE OF LIFT PURCHASE. WARRANTY MAY ALSO BE VALIDATED BY REGISTERING ONLINE @ www.challengerlifts.com/register-your-lift

Click here to enlarge Challenger Lift Warranty Chart

Discount on Selected Challenger Lifts

  • VLE10 - $300 off
  • SA10 -$300 off
  • LE12 - $450 off
  • E15 - $550 off
  • CL4P7S / CL4P9S/X/W - $300 - $400 off
  • MR6 - $350 off
  • CL10AV3 - $300 off
  • CL12A - $450 off
  • 4P14EFX/XFX - $450 off
  • SX14 - $1000 off
  • BT3000 - $1000 off
  • BT330 - $500 off

How to Redeem

1. Discount is applied in the cart.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare