Skip to content
ORDERS SHIP FREE TO THE 48 CONTIGUOUS STATES
ORDERS SHIP FREE TO THE 48 CONTIGUOUS STATES
CALL OUR OFFICE (817) 865-3707 | EMAIL OUR TEAM
SX14-SR - 14K Scissor Alignment Lift Dual Hydraulic Cylinders, alamoequipment.com

SX14-SR - 14K Scissor Alignment Lift Dual Hydraulic Cylinders

SKU SX14-SR

Lead time:

by Challenger
Save 36% Save 36%
$63,635.69
$63,635.69 - $63,635.69
$63,635.69
$40,726.84
$40,726.84 - $40,726.84
$40,726.84

  • DESCRIPTION

    Challenger SX14 series scissor lifts are easy to operate and load. Adjustable turn plates allow for a wider range of wheelbase alignments. The SX14 features LED lighting, single locking point rear slip plates, photo cell to ensure runway synchronization and optional extended ramps that accommodate low-clearance vehicles. These alignment racks are available in flush or surface-mounted models. Kit includes the lift, two rolling jacks, adjustable turn plates, and an airline kit for dual jack operation.

  • FEATURES + BENEFITS

    • The package includes two (2) rolling jacks, turn plates, and an airline kit for dual jack operation.
    • Extra wide runway width accommodates single and dual-rear-wheel vehicles
    • Photocell ensures runway synchronization
    • The automatic light feature illuminates the vehicle underside and turns off when lift is lowered below 18”.
    • Maintenance-reduced rear slip plates use oversized, encapsulated bearings to protect against environmental debris
    • Twin hydraulic cylinders provide smooth operation.
    • Approach ramps are equipped with end rollers to minimize noise and reduce floor damage
    • Single point air actuated lock release allows ergonomic working height for technicians to increase productivity and minimize fatigue
    • Powder coat finish provides long-lasting durability
    • Can be mounted above ground or flush
    • ALI certified

  • SPECIFICATIONS

    Model Number SX14-SR
    Description
    		 Standard Open-Front Flat Deck
    Lifting Capacity 14,000 lbs. 
    Raise Height 77” 
    Overall Length 265”
    Overall Width 91.25”
    Width of Runways 25.5”
    Between Runways 40”
    Lowered Height 10.5”
    Maximum Wheelbase 183”
    Wheel Alignment (Max.) 176"
    Wheel Alignment (Min.) 70.75"
    Voltage (Single Phase Std.)
    		 208-240v (23 FLA)
    Motor 3 HP
    Speed of Rise 75 s
    Air Required (filtered/lubricated) 90 - 120 psi (20CFM)
    Min. Recommended Bay Size 14' x 28'
    ALI/ETL Certified
    		 Yes
    Color Available Black

  • MANUAL + SPECS

Challenger Lifts, Inc. lifts are guaranteed to the original owner. CLI shall repair or replace, at CLI option, for the full warranty period those parts that prove upon inspection to be defective and pay for reasonable costs of transportation and/or labor for replacement of said parts for the warranty period stated below. This warranty shall not apply unless the product is installed, used and maintained according to CLI’s specifications set forth in CLI’s installation, operation and maintenance instructions. Use of any unapproved parts or accessories will void your warranty. This limited warranty extends only to the original purchaser and is not transferable. This warranty is valid only if the product has been registered with Challenger Lift, Inc., www.challengerlifts.com.

This warranty does not cover normal maintenance or adjustments, damage or malfunction caused by improper handling, installation, abuse, misuse, negligence, carelessness of operation, or normal wear and tear. In addition, this warranty does not cover equipment when repairs have been attempted or made by anyone other than a CLI authorized service representative.

This warranty is exclusive and is in lieu of all other warranties expressed or implied including any implied warranty of fitness for a particular purpose, which implied warranties are expressly excluded. No employee, agent, representative, dealer or other person or entity is authorized to give any warranties of any nature on behalf of CLI.

The remedies described are exclusive and in no event shall CLI, Inc. be liable for special, consequential or incidental damages for the breach of or delay in performance of the warranty. This warranty shall be governed by the Commonwealth of Kentucky, and shall be subject to the exclusive jurisdiction of the Court in the Commonwealth of Kentucky in the County of Jefferson. Functional parts are any wear items, as defined from time to time by Challenger Lifts. Examples include power units, cylinders, sheaves, hoses, cables, controls, etc. and may differ depending on the model of lift.

Structural parts are items, as defined from time to time by Challenger Lifts, Inc. that are not Functional Parts and include items like carriage, columns, arms, runways, plungers, etc. and may differ depending on the type of lift.

Note: WARRANTY CARD MUST BE COMPLETED AND RETURNED UPON INSTALLATION FOR VALIDATION or WARRANTY PERIOD WILL BEGIN FROM INVOICE DATE OF LIFT PURCHASE. WARRANTY MAY ALSO BE VALIDATED BY REGISTERING ONLINE @ www.challengerlifts.com/register-your-lift

Click here to enlarge Challenger Lift Warranty Chart

Discount on Selected Challenger Lifts

  • VLE10 - $300 off
  • SA10 -$300 off
  • LE12 - $450 off
  • E15 - $550 off
  • CL4P7S / CL4P9S/X/W - $300 - $400 off
  • MR6 - $350 off
  • CL10AV3 - $300 off
  • CL12A - $450 off
  • 4P14EFX/XFX - $450 off
  • SX14 - $1000 off
  • BT3000 - $1000 off
  • BT330 - $500 off

How to Redeem

1. Discount is applied in the cart.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare