Atlas® BP-12000 HD Floor Base-Plate 2 Post Lift #ATEATTD-BP12000X-FPD

Atlas® BP-12000 — 12,000 lbs 2-Post Lift

Your building has the bay space and the business to justify a 12,000 lb lift — what it doesn't have is the ceiling height. The overhead bar on a standard two-post clearfloor lift needs serious headroom, and in an older shop, a converted garage, or a leased space with low rafters, ductwork, or a finished ceiling, that bar simply won't fit. You're stuck either passing on heavier trucks or watching a great bay sit half-used because the lift you want is taller than the room you have.

The Atlas® BP-12000 is built for exactly that bay. It's a commercial-grade baseplate lift, which means the equalizer cables run across the floor between the columns instead of through an overhead bar — so the entire lift stands just 122 1/2" tall and slides in under ceilings that would never clear a clearfloor model. You still get a full 12,000 lb capacity and symmetric 3-stage arms that reach short and long wheelbases alike, with 118 1/8"/123 1/2" inside the columns and a 103 5/8"/109" drive-thru to load full-size trucks. It runs on standard 220V single-phase 30A and ships with a 12-piece truck adapter set. The one trade-off is honest: a low floor plate runs between the posts, so it's not a true clear floor — but for a low-ceiling bay, that plate is what lets you run a 12,000 lb lift at all.

Who the BP-12000 Is Built For

• Shops in older buildings with low ceilings that can't clear an overhead-bar lift — the baseplate design tops out at just 122 1/2" overall and fits where a clearfloor two-post never could.
• Converted garages, pole barns, and leased bays with rafters, ductwork, or a finished ceiling in the way — you get full 12,000 lb capacity without needing to raise the roof or relocate.
• Busy shops that need to lift full-size trucks but are height-boxed — symmetric 3-stage arms and a 12,000 lb capacity handle heavy pickups even with the ceiling working against you.
• Owners who'd rather invest in the lift than in construction — instead of cutting into a ceiling or pouring a new building, the BP-12000 simply fits the room you already have.
• Shops servicing full-size and dually trucks that need real loading width — 118 1/8"/123 1/2" inside the columns and a drive-thru up to 109" let big trucks pull straight in despite the low ceiling.
• Operators who can live with a floor plate between the posts in exchange for capacity — if a transmission jack rolling fully unobstructed isn't the priority but fitting a 12k lift under a low ceiling is, this is the trade worth making.

What the BP-12000 Is NOT Built For

• ❌ Shops that want a clear floor (the baseplate runs across the floor between columns)
• ❌ Buyers requiring ALI/ETL certification — choose the Atlas Platinum PVL12 instead

What Makes the BP-12000 Different

Low-Ceiling Baseplate Design

The BP-12000 runs its equalizer cables across the floor between the columns instead of through an overhead crossbar, which is what lets the whole lift stand just 122 1/2" tall. For a shop with low rafters, ductwork, or a finished ceiling, that baseplate design is the difference between installing a 12,000 lb lift and passing on the work entirely. You give up an unobstructed floor for a low plate between the posts — but in a height-boxed bay, that trade-off is exactly what turns dead space into a working heavy-duty lifting bay.

Capacity & Lift Height

With a full 12,000 lb capacity, the BP-12000 lifts full-size pickups, heavy 3/4- and 1-ton trucks, and loaded work vehicles that overwhelm a 9,000 lb lift. The symmetric 3-stage arms reach up to a max lift of 88 1/2" with the adapters in place, so techs get real standing room under tall trucks rather than crouching the whole job. That combination of heavy capacity and genuine lift height means your busiest, most profitable truck work gets done faster and more comfortably — even in a building with a ceiling that says it shouldn't fit.

Bay Fit & Clearance

The BP-12000 measures 149 3/8"/154 1/2" across the floor with 118 1/8"/123 1/2" inside the columns and a 103 5/8"/109" drive-thru between the posts. That loading width lets full-size and dually trucks pull straight in and swing their doors without the column getting in the way — the daily reality of a bay that actually services big vehicles. Knowing these numbers up front means you confirm the lift fits your bay layout and the trucks you run before it ships, instead of discovering a clearance problem after the crate lands on your dock.

Included Truck Adapters

Every BP-12000 ships with a 12-piece truck adapter set, so you're not chasing down stack adapters or improvising lift points the first week the lift is in service. Trucks, vans, and frame-contact vehicles sit at the right height with the right pads from day one, which means safer pickup points and faster, more confident setup on every heavy vehicle. Having the adapters in the box is one less line item to source and one less reason a tech reaches for the wrong pad — the lift arrives ready for the full-size work it's built to do.

Power & Hydraulics

The BP-12000 runs on 220V, single-phase power with a 30-amp breaker — the same electrical spec as most shop welders and rotary-screw compressors. In most existing shops that means no dedicated panel upgrade and no electrician visit beyond running a line to the lift location. The hydraulic system uses AW32 or AW46 oil, both standard shop-floor stock. Simple power requirements and common oil mean lower install cost and a 12,000 lb lift that fits into your shop's existing infrastructure instead of forcing an expensive electrical project on top of the purchase.

Full Specifications — BP-12000

Atlas® Warranty — BP-12000

Atlas® backs the BP-12000 with comprehensive coverage. Every component is covered from the day it ships.

Warranty service is through Alamo Equipment & Service. When you buy from us, you are not waiting on a manufacturer hotline — call (844) 480-6059 and we handle it. Verify the model-specific warranty terms on the Atlas® spec sheet at purchase.