Atlas® Equipment 9KOH Sym/Asy 2 Post Lift 9k #ATEXH-9KOHX-FPD
Couldn't load pickup availability
| Model / Part Number | ATEXH-9KOHX-FPD |
| Capacity | 9,000 lbs |
| Lift Type | Overhead clearfloor 2-post lift with Secondary Lock System |
| Lifting Configuration | Symmetric and asymmetric (combo arm positions), Secondary Lock System (SLS), adjustable height |
| Overall Height | 142" (11' 10") or 138" (11' 6") |
| Minimum Ceiling Height | 12' |
| Overall Width | 141" with power unit / 134 1/4" without (11' 9" / 11' 2 1/4") |
| Drive-Thru Clearance | 100" (8' 4") |
| Rise Height | 74" without adapters / 80 1/4" with adapters |
| Motor / Electrical | 220V single phase, 30A breaker recommended |
| Rise Time | Commercial grade |
| Concrete Requirement | 4" reinforced slab at 3,000 PSI minimum — confirm with Alamo before install |
| Warranty | 2-year structural / 2-year hydraulic / 1-year power unit / 90-day wear |
- 4" reinforced slab at 3,000 PSI minimum — confirm with Alamo before install
- Must be fully cured before anchor installation
- Verify with Alamo before ordering
- 220V single phase, 30A breaker recommended
- Dedicated circuit recommended
- Have an electrician run a drop to the bay before install day
- Plan for 142" (11' 10") or 138" (11' 6") overall lift height
- Floor width 141" with power unit / 134 1/4" without (11' 9" / 11' 2 1/4")
- Measure to lowest obstruction, not peak
Atlas® Equipment 9KOH — 9,000 lbs 2-Post Lift
The 9,000 lb overhead 2-post bay is one of the most common shop expansions — and one of the most price-sensitive decisions a shop makes. The Atlas 9KOH is Atlas Equipment's most affordable 9K overhead clearfloor 2-post: under $3,100, with symmetric and asymmetric arm positions, two column height settings (11'6" or 11'10"), and a spring-loaded Secondary Lock System that automatically engages on chain slack or failure. For a shop that needs a capable 9K bay without premium features they won't use, the 9KOH covers the specification.
The 9KOH uses dual hydraulic chain-drive cylinders with Atlas's spring-loaded SLS — the same Secondary Lock System available on the 9KBP base-plate model, applied to the overhead clearfloor format. Low lift pad height supports both low-clearance cars and heavy trucks within the 9K capacity range. Two height settings (11'6" or 11'10") give install flexibility for bays with different ceiling clearances. Atlas covers the 9KOH with their 2-year structural and hydraulic, 1-year power unit warranty. Call Alamo at (844) 480-6059 to confirm your bay and schedule installation.
Who the 9KOH Is Built For
- The general repair shop that runs a 9K overhead bay hard every day on a mix of sedans and trucks, and wants the Secondary Lock System as a baseline safety feature without paying the Challenger XP9 premium
- Technicians who need both symmetric and asymmetric loading in the same bay — the 9KOH's combination arm positions cover both geometries for the mixed vehicle types that roll through a general repair shop
- Shops adding a second or third bay on a budget where the 9KOH's under-$3,100 price and Atlas Equipment 2/2/1 warranty make the expansion financially straightforward
- Fleet and commercial shops that prioritize the SLS chain-failure protection in a high-cycle bay and want two height settings for ceiling clearance flexibility
- Buyers who want Atlas commercial construction at the base entry point of the Atlas Equipment 9K overhead line
What the 9KOH Is NOT Built For
- ❌ Shops where ALI/ETL certification is a documented requirement — the 9KOH is commercial-grade, not ALI listed
- ❌ Bays with ceilings below 12 feet — the 9KOH requires 12-foot minimum clearance at its lower height setting
- ❌ Shops that need quick-cycle rise speed — the 9KOH is a standard-speed commercial platform
Questions about fit or capacity? Call Alamo at (844) 480-6059.
What Makes the 9KOH Different
9K Overhead Clearfloor at Atlas Equipment's Entry Price
The 9KOH is Atlas Equipment's most affordable 9,000 lb overhead 2-post — the entry point for the Atlas Equipment 9K overhead line. At under $3,100 with Atlas's commercial-grade chain-drive cylinders, SLS safety system, and 2-year structural/hydraulic warranty, the 9KOH is the value decision in the Atlas 9K overhead range. Shops that don't need the single-piece column rigidity of the 9OHSC, the direct-drive simplicity of the PRO-9D, or the extended-width coverage of the PV10PX have the correct spec in the 9KOH.
Symmetric and Asymmetric Arm Positions — Low Pad Height
The 9KOH supports both symmetric (equal front/rear reach, centered vehicle) and asymmetric (offset for door-open access) arm positions. Low lift pad height makes it practical for both small cars with low lift points and heavier trucks where the arm needs to clear a side step or running board. Solid truck adapters and sliding lift point adapters are included. The 220V power unit can be mounted on either side of the lift, giving install flexibility for different bay electrical layouts.
Secondary Lock System (SLS) — Automatic Chain Failure Response
The 9KOH includes Atlas's spring-loaded Secondary Lock System — the same SLS as the 9KBP base-plate model. When the chain slackens or breaks, the SLS automatically engages at the carriage, locking it at the current height before asymmetric loading can develop. The auto-engagement means the SLS is active on every lift cycle without requiring a separate manual engagement step from the technician. For a high-cycle bay, this is the difference between a mechanical failure that causes a vehicle drop and one that's arrested before the vehicle moves.
Two Column Height Settings — 11' 6" or 11' 10"
The 9KOH installs at either 138" (11'6") or 142" (11'10") overall height — two settings that give useful flexibility for bays where ceiling clearance varies from the nominal 12-foot standard. A bay with 12'2" to the lowest obstruction works cleanly with the 11'10" setting; a bay that's tighter fits the 11'6" setting. The padded overhead shut-off bar activates at 11'4" (high setting) or 11' (low setting), stopping the rise cycle before vehicle contact with the overhead structure.
Atlas Equipment Commercial Grade — 5mm Column, 6mm Carriage and Arms
The 9KOH uses 5mm column steel with 6mm carriage and arm steel — the same commercial specification as the rest of the Atlas Equipment 9K line. The dual hydraulic chain-drive cylinders and commercial-grade drive cable (0.375" diameter) are built for everyday professional use. Atlas's 2-year structural and hydraulic warranty applies to the 9KOH under the same terms as the full Atlas Equipment PV/OH/BP series (sourced from atlasautoequipment.com). Warranty service runs through Alamo — call (844) 480-6059.
- ✅ Value-focused shops that need a commercial-grade 9K overhead 2-post with a built-in chain-failure protection system at the lowest Atlas Equipment 9K overhead price point
- ✅ Shops that regularly service both passenger cars (asymmetric position) and pickup trucks (symmetric position) and want both from a single lift configuration
- ✅ Two-height-setting bays where ceiling clearance varies between bays and the 11'6" or 11'10" height setting lets the 9KOH fit in either
- ✅ Shops upgrading from a basic 9K lift to a platform with a documented secondary safety system for their everyday bay
- ✅ Fleet service bays that need maximum lift capacity at 9K with Atlas's 2-year structural and hydraulic warranty at a sub-$3,100 price point
- ❌ Shops where ALI/ETL certification is a documented requirement — the 9KOH is commercial-grade, not ALI listed
- ❌ Bays with ceilings below 12 feet — the 9KOH requires 12-foot minimum clearance at its lower height setting
- ❌ Shops that need quick-cycle rise speed — the 9KOH is a standard-speed commercial platform
9KOH vs. Challenger XP9 (9,000 lb) — Which Lift Is Right for Your Shop?
| Decision Point | 9KOH | Challenger XP9 (9,000 lb) |
|---|---|---|
| Capacity | 9,000 lbs | 9,000 lbs |
| ALI Certification | Not ALI listed — commercial grade | ALI/ETL Certified |
| Lift type | Overhead clearfloor, sym and asym positions | Overhead clearfloor, Versymmetric® |
| Ceiling Height Required | 11' 6" minimum | 12' minimum |
| Lock system | Secondary Lock System (SLS) | Standard Challenger safety locks |
| Best fit | 9K overhead value + SLS + two height settings + Atlas 2/2/1 | 9K ALI-certified + Versymmetric® + QuickCycle |
Choose the Atlas 9KOH when your shop needs a 9,000 lb overhead 2-post with Atlas's Secondary Lock System, two adjustable height settings, and symmetric/asymmetric capability at under $3,100. Choose the Challenger XP9 when your shop requires ALI/ETL certification and Versymmetric® arm technology with QuickCycle rise speed. Both stay inside Alamo’s catalog — call (844) 480-6059.
Full Specifications — 9KOH
| Model / Part Number | ATEXH-9KOHX-FPD |
| Capacity | 9,000 lbs |
| Lift Type | Overhead clearfloor 2-post lift with Secondary Lock System |
| Lifting Configuration | Symmetric and asymmetric (combo arm positions), Secondary Lock System (SLS), adjustable height |
| Overall Height | 142" (11' 10") or 138" (11' 6") |
| Minimum Ceiling Height | 12' |
| Overall Width | 141" with power unit / 134 1/4" without (11' 9" / 11' 2 1/4") |
| Drive-Thru Clearance | 100" (8' 4") |
| Rise Height | 74" without adapters / 80 1/4" with adapters |
| Motor / Electrical | 220V single phase, 30A breaker recommended |
| Rise Time | Commercial grade |
| Concrete Requirement | 4" reinforced slab at 3,000 PSI minimum — confirm with Alamo before install |
| Warranty | 2-year structural / 2-year hydraulic / 1-year power unit / 90-day wear |
⚠️ Installation Requirements
- Ceiling height: Plan for 142" (11' 10") or 138" (11' 6") overall lift height; measure to the lowest obstruction.
- Electrical: 220V single phase, 30A breaker recommended; consult an electrician for exact breaker sizing.
- Concrete: 4" reinforced slab at 3,000 PSI minimum — confirm with Alamo before install.
- Bay width: Confirm 141" with power unit / 134 1/4" without (11' 9" / 11' 2 1/4") floor width clearance; measure before ordering.
- Surface anchoring: Lift must be anchored per manufacturer specification — do not skip anchoring on production bays.
- Installation: Alamo installs every lift we sell. Call (844) 480-6059 to schedule.
Atlas® Equipment Warranty — 9KOH
Atlas Equipment backs the 9KOH with their standard warranty covering structural components, hydraulic system, electric power unit, and wear items — verified from atlasautoequipment.com/2-year-structural-2-year-hydraulic-limited-warranty. This warranty applies to all Atlas PV, APEX, BP, and OH series lifts.
| Component | Coverage Term |
|---|---|
| Structural components (welds & frame) | 2 years |
| Hydraulic system | 2 years |
| Electric power unit | 1 year |
| Wear items & accessories | 90 days |
Warranty service is through Alamo Equipment & Service. When you buy from us, you are not waiting on a manufacturer hotline — call (844) 480-6059 and we handle it.
❓ Frequently Asked Questions — 9KOH
Is the Atlas 9KOH ALI certified?
The 9KOH is commercial-grade but not listed in the ALI Directory of Certified Lifts. If your shop requires ALI/ETL certification at the 9K level, Alamo sells the Challenger XP9 (ALI/ETL certified, 9K, Versymmetric® arms). Call (844) 480-6059 to compare.
What is the minimum ceiling height for the Atlas 9KOH?
The 9KOH has two height settings — 138" (11'6") and 142" (11'10") overall. A 12-foot minimum ceiling handles both settings. Measure to the lowest obstruction in your bay — beams, ductwork, and sprinkler heads often dictate actual usable clearance below the nominal ceiling. Call Alamo at (844) 480-6059 to confirm your bay before ordering.
How does the Secondary Lock System work on the 9KOH?
The Secondary Lock System is a spring-loaded mechanism integrated into each carriage. When the drive chain slackens or breaks, the spring-loaded locks engage automatically — the mechanism is spring-actuated, so it engages without requiring any technician action. The manual lowering operation uses the standard lever on the power unit; the SLS is a supplemental safety system, not a replacement for normal operating procedure.
What warranty does the Atlas 9KOH carry?
The 9KOH carries Atlas Equipment's 2-year structural, 2-year hydraulic, 1-year power unit, 90-day wear items warranty — verified from atlasautoequipment.com/2-year-structural-2-year-hydraulic-limited-warranty. When you buy from Alamo, warranty service runs through us. Call (844) 480-6059 for any warranty claim or service question.
Why Buy the 9KOH from Alamo Equipment & Service?
- We install it. The 9KOH's two column height settings require correct selection at install based on your bay's ceiling measurement. Alamo confirms your ceiling before the lift ships and handles the install.
- We service it. The Atlas Equipment 2/2/1 warranty runs through Alamo — call (844) 480-6059 for warranty claims and parts needs. Same team, one number.
- SLS knowledge. Alamo walks you through how the Secondary Lock System works, what the normal engagement feels like, and what to inspect at each service interval.
- Expert comparison advice. If the Challenger XP9 (ALI/ETL certified, Versymmetric® arms) fits your shop better, Alamo will compare both honestly before you buy.
- Entry-point expertise. Alamo sells the full Atlas Equipment 9K overhead line. The 9KOH is the right choice for the shop that needs SLS protection and sym/asym capability at Atlas's lowest 9K overhead price.
The 9KOH delivers the most capacity per dollar in the Atlas Equipment 9K overhead line. Call Alamo to confirm it fits your bay.
Shipping Information:
Customers may pick up their lift at the nearest freight terminal at no additional cost.
You will need to provide your own trailer. Terminal staff will safely load the lift onto your trailer. The RECEIVER/CUSTOMER is solely responsible for properly securing the load for transport.
To schedule a pickup, contact us at info@alamoequipment.com or
(844) 480-6059. Please include the lift model and your zip code so we can direct you to the appropriate terminal.
Atlas Warranty Information
- 5-Year Structural Warranty
- 2-Year Hydraulic-Power Warranty
