Atlas® Equipment 9OHSC Overhead 9k lbs 2-Post Lift #ATEATTD-9OHSC-SS-FPD

Atlas® Equipment 9OHSC — 9,000 lbs 2-Post Lift

Smaller repair shops often get priced out of commercial-grade 9,000 lb lifts by platforms with features they don't need — quick-cycle speed, premium arm systems, or third-party certification requirements that don't apply to their operation. The Atlas 9OHSC is the 9K overhead 2-post built for that shop: a single-piece 11' 10" formed column with an extended carriage for maximum arm and column strength, dual hydraulic chain-drive cylinders, and Atlas's commercial-grade construction at a price that makes a 9K overhead bay achievable for a smaller operation.

The 9OHSC's defining structural feature is its single-piece column — a full-length formed column rather than a bolted two-piece design. That single-piece construction eliminates the potential flex point at a column joint, giving the 9OHSC a more rigid carriage track over the full rise height. The extended carriage length also distributes the arm load over a longer bearing surface than standard-height carriages. Atlas backs the 9OHSC with the standard Atlas Equipment warranty: 2 years structural and hydraulic, 1 year power unit, 90 days wear. Call Alamo at (844) 480-6059.

Who the 9OHSC Is Built For

• The smaller commercial shop that runs a 9K lift hard every day on compact cars, sedans, and small SUVs and wants the structural durability of a single-piece column design without the Platinum PVL price
• Home mechanics who want a commercial-grade 9K platform over a residential-spec alternative — the 9OHSC's single-piece column and extended carriage are commercial design choices at a home-shop-accessible price
• Shops that have used Atlas PV series or 9OHSC in other bays and want the same Atlas commercial construction for an additional bay
• Technicians who need 3-stage front arms for the longer reach range on sedan and compact SUV lift points without a dedicated adapter swap
• Value-focused operations adding a 9K bay where Atlas brand reliability is a priority and the $4,449 price point makes the expansion practical

What the 9OHSC Is NOT Built For

• ❌ Shops requiring ALI/ETL certification for compliance or insurance documentation — the 9OHSC is commercial-grade, not ALI listed
• ❌ Bays with ceilings below 12 feet — the single-piece column requires 12-foot minimum clearance for installation
• ❌ Shops needing asymmetric arm configuration from a fixed install — the 9OHSC arms are set at install, and the single-piece column makes post-install reconfiguration more involved

Questions about fit or capacity? Call Alamo at (844) 480-6059.

What Makes the 9OHSC Different

Single-Piece 11' 10" Formed Column — No Joint, No Flex Point

The 9OHSC uses a single-piece formed column rather than a two-section bolted column — a full 11' 10" of continuous column steel. A two-piece column with a mid-column joint introduces a potential flex point under load; the single-piece design eliminates it. Atlas specifically calls out the single-piece column and extended carriage as the 9OHSC's structural differentiators: maximum arm and column strength from a design that doesn't rely on a mid-column connection to maintain rigidity at rated load.

3-Stage Front / 2-Stage Rear Arms — Adapter Heights 2", 3", 6"

The 9OHSC's 3-stage front arms provide more reach positions than a 2-stage front arm — important for reaching sedan and compact SUV lift points that sit further inboard. The 2-stage rear arms cover standard rear lift point positions. The included 12-piece truck adapter set (2", 3", and 6" heights) brings the maximum lift height from 76 3/4" to 87 3/4" with adapters — covering tall trucks and full-size SUVs within the 9K capacity limit. Adapter peg size is 1.5".

Dual Hydraulic Chain-Drive Cylinders

The 9OHSC uses dual hydraulic chain-drive cylinders — one per column — synchronized through the overhead cable. The chain-drive architecture is a traditional commercial lift design with a long service record. Single-point lock release allows simultaneous column release from one control position. Rubber guards on carriages protect door panels during approach and service positioning. The overhead design keeps the floor between the columns completely clear.

Commercial-Grade Construction at a Value Price

The 9OHSC is the Atlas Equipment series entry point for shops that want commercial-grade column construction without the Platinum PVL price. The single-piece column, extended carriage, and dual chain-drive cylinders are commercial design choices. Atlas calls the 9OHSC 'ideal for smaller commercial repair shops or home mechanics who need top-tier quality at an unbeatable price.' Alamo installs and services the 9OHSC — call (844) 480-6059 for installation scheduling.

Atlas Equipment 2/2/1 Warranty — Parts Only

The 9OHSC carries Atlas Equipment's verified 2-year structural, 2-year hydraulic, 1-year power unit, 90-day wear warranty — sourced from atlasautoequipment.com. That's a tiered warranty at each component category, not a single flat term. The 2-year hydraulic and structural terms on a 9K value platform are competitive with certified alternatives at higher price points. Warranty service runs through Alamo — call (844) 480-6059 and we handle the claim.

Full Specifications — 9OHSC

Atlas® Equipment Warranty — 9OHSC

Atlas Equipment backs the 9OHSC with their standard warranty covering structural components, hydraulic system, electric power unit, and wear items — verified from atlasautoequipment.com/2-year-structural-2-year-hydraulic-limited-warranty. This warranty applies to all Atlas PV, APEX, BP, and OH series lifts.

Warranty service is through Alamo Equipment & Service. When you buy from us, you are not waiting on a manufacturer hotline — call (844) 480-6059 and we handle it.