Atlas® MP-6580VC 80 Gallon Vertical Air Compressor #ATEMP-6580VC
Couldn't load pickup availability
Atlas Automotive Equipment Shipping
Equipment: Free shipping
Parts: Standard tiered rate
| Model / Part Number | ATEMP-6580VC |
| Horsepower | 5 HP |
| Tank | 80 Gallon Vertical |
| CFM @ 90 PSI | 18 CFM @ 90 PSI |
| Pressure Range | 150 PSI |
| Warranty | 1-year parts only |
Atlas® MP-6580VC — 5 HP Air Compressor
A compressor that short-cycles every few minutes wears out its motor faster and leaves techs waiting on air mid-job — usually a sign the tank is too small for how the shop actually uses it, not that the compressor itself is bad.
The Atlas® MP-6580VC is a vertical reciprocating (automotive/shop duty) compressor rated for 5 HP with an 80 gallon vertical tank, built for shops and commercial operations that need compressed air on tap all day without paying for accessories they don’t need.
Who the MP-6580VC Is Built For
- ✅ A service bay running tire equipment and a couple of impact wrenches through the day, where an 80-gallon tank keeps the line from running dry between jobs without needing a full commercial 7.5HP setup
- ✅ A home garage owner replacing a worn-out 30 or 40-gallon compressor who's tired of it cycling every few minutes under moderate tool use — the larger vertical tank buys real runtime between motor starts
- ✅ A shop with a tight equipment corner that needs the extra 80-gallon storage capacity but can't spare the wider footprint a horizontal tank of the same size would take up
- ✅ A buyer replacing a similar-sized older Atlas or automotive-line compressor who wants a like-for-like swap without re-plumbing the shop's air lines or moving equipment around
- ✅ A shop that doesn't need a full 7.5HP AF9/AF9P setup but still wants real 80-gallon storage — the MP-6580VC's 5HP motor and 18 CFM output covers most tire and impact-tool work at a lower price tier
- ✅ General automotive maintenance work — tire changes, brake jobs, routine pneumatic tool use — where steady air supply matters more than chasing a maximum CFM number
What the MP-6580VC Is NOT Built For
- ❌ Multi-tech shops running several tools simultaneously that need more than 18 CFM — the AF9 or AF9P's 7.5HP/23 CFM tier has more headroom
- ❌ Sandblasting or other continuous heavy-draw operations — this 5HP unit isn't built for that duty cycle
- ❌ Shops needing 150+ PSI beyond this unit's 150 PSI max — step up to the AF9 line for higher-pressure tools
What Makes the MP-6580VC Different
CFM & Pressure Output
Delivers 18 CFM @ 90 PSI and holds pressure up to 150 PSI, enough headroom to run impact wrenches, tire equipment, and paint tools without the tank running dry.
Plus Package Upgrades
standard configuration, no Plus Package accessories listed.
- Automotive shops needing 80-gal vertical storage
- Space-saving vertical footprint
- Lower-HP tier than AF9/AF9P at a lower price
- Shops needing more than 18 CFM — see AF9/AF9P
- Continuous heavy-draw sandblasting use
MP-6580VC vs. FS-Curtis CA7.5-V (7.5 HP, 80 Gal Vertical) — Which Compressor Is Right for Your Shop?
| Decision Point | MP-6580VC | FS-Curtis CA7.5-V (7.5 HP, 80 Gal Vertical) |
|---|---|---|
| Tank | 80 Gallon Vertical | 80 Gallon Vertical |
| Horsepower | 5 HP | 7.5 HP |
| CFM | 18 CFM @ 90 PSI | 23.2 CFM @ 175 PSI (E57 pump) |
| Best fit | Shops needing 80-gal storage at a lower HP/price tier | Shops needing more CFM headroom at 7.5HP |
Choose the MP-6580VC for 80-gallon vertical storage at a lower HP and lower price than the 7.5HP tier. Choose the FS-Curtis CA7.5-V if you need more CFM headroom at 7.5HP for heavier simultaneous tool use. Both stay inside Alamo’s catalog — call (844) 480-6059.
Full Specifications — MP-6580VC
| Model / Part Number | ATEMP-6580VC |
| Horsepower | 5 HP |
| Configuration | Vertical Reciprocating (Automotive/Shop Duty) |
| Tank | 80 Gallon Vertical |
| CFM @ 90 PSI | 18 CFM @ 90 PSI |
| Pressure Range | 150 PSI |
| Overall Dimensions | 75" L × 31" W × 30" H |
| Shipping Weight | 418 lbs |
| Warranty | 1-year parts only |
⚠️ Setup Requirements
- Electrical: Not published for this unit — call Alamo at (844) 480-6059 to confirm the electrical requirement before scheduling an electrician.
- Floor space: 75" L × 31" W × 30" H footprint; plan clear access on at least two sides for maintenance and tank drain.
- Ventilation: Locate in a dry, ventilated area away from dust and moisture to protect the pump and tank.
- Weight: 418 lbs shipping weight — confirm your floor/dock can receive and position the unit.
- Setup: Installation is available as a quoted service (piping, electrical tie-in, functional test) — it’s not included in the purchase price. Call (844) 480-6059 for an install quote if you’d like Alamo’s crew to set it up.
Atlas® Warranty — MP-6580VC
Atlas® backs the MP-6580VC with a 1-year parts-only warranty.
| Component | Coverage Term |
|---|---|
| Tank & pump | 1 year parts |
| Motor & electrical components | 1 year parts |
| Wear items (belts, filters, gaskets) | Not covered (consumable) |
Warranty service is through Alamo Equipment & Service — call (844) 480-6059 instead of waiting on a manufacturer hotline. Coverage is subject to Atlas® warranty terms, conditions, and requirements.
Frequently Asked Questions — Atlas® MP-6580VC
Why Buy the MP-6580VC from Alamo Equipment & Service?
- Installation available. Buying online gets you the compressor — piping and electrical tie-in are an extra-charge service. We have the crews to install it and can quote that separately; call (844) 480-6059 for a quote.
- We service it. These compressors need preventative maintenance up to 4x a year per the manufacturer — oil changes, belt and air filter checks, contactor and electrical inspection. Call (844) 480-6059 for maintenance, repairs, or support — and if you ever need warranty work, we register your equipment with the manufacturer and handle the claim directly, so you’re not stuck navigating vendor support on your own.
- We size it with you. 5 HP, 80 Gallon Vertical tank, 18 CFM @ 90 PSI — we’ll confirm this matches your shop’s actual air draw before you order.
- Free shipping. Ships free to the 48 contiguous states.
- Expert comparison help. Not sure if the MP-6580VC or the FS-Curtis CA7.5-V (7.5 HP, 80 Gal Vertical) is the better fit? We’ll walk you through it.
A shop buying from a pure e-commerce retailer gets a box. A shop buying from Alamo gets a partner.
Shipping Information:
Customers may pick up their lift at the nearest freight terminal at no additional cost.
You will need to provide your own trailer. Terminal staff will safely load the lift onto your trailer. The RECEIVER/CUSTOMER is solely responsible for properly securing the load for transport.
To schedule a pickup, contact us at info@alamoequipment.com or
(844) 480-6059. Please include the lift model and your zip code so we can direct you to the appropriate terminal.
Atlas Warranty Information
- 5-Year Structural Warranty
- 2-Year Hydraulic-Power Warranty