Atlas® OHX10000X Commercial Grade Extra Tall 2-Post Lift #ATEATTD-OHX10000X-FPD

Atlas® OHX10000X — 10,000 lbs 2-Post Lift

If you've ever rolled a transmission jack under a vehicle and caught it on a baseplate, or fought a drain pan around a floor plate while your tech steps over it for the tenth time that day, you know how much a cluttered bay floor slows real work down. Add tall trucks, lifted vehicles, and full-size vans to the mix and a short or obstructed lift becomes a constant compromise — you either can't raise them high enough for comfortable under-vehicle access, or you're working around equipment instead of with it. A 10,000 lb bay that has the ceiling height deserves a lift that uses it.

The Atlas® OHX10000X delivers a genuinely open floor with the headroom to match. The overhead design routes the equalizer cables through a top crossbar instead of across the floor, so your bay stays completely clear for jacks, pans, and creepers — nothing to trip over, nothing to work around. At 152" overall (12'8") it's extra-tall, with an 85 3/4" max lift using the adapters to get tall trucks and vans all the way up, and it's extra-wide at 118 1/4" inside the columns with a 106 7/8" drive-thru for loading big vehicles. Automatic arm restraints lock the arms in place under load for safe, repeatable lifts. Full 10,000 lb capacity, standard 220V single-phase 30A power, and a 12-piece truck adapter set in the box make it a clean, professional fit for any bay with the ceiling to take it.

Who the OHX10000X Is Built For

• Shops with the ceiling height to spare that want a truly clear bay floor — the overhead cable design leaves nothing between the posts for jacks, drain pans, and creepers to catch on.
• Technicians servicing tall trucks, lifted vehicles, and full-size vans who need every inch of lift — the 152" overall height and 85 3/4" max lift with adapters raise tall vehicles to comfortable working height.
• Busy bays that prize speed and clean workflow — an open floor plus automatic arm restraints mean techs set the arms, lock them, and lift without fighting obstructions or double-checking restraints by hand.
• Shops loading wide-track trucks and full-size vehicles — 118 1/4" inside the columns and a 106 7/8" drive-thru give big vehicles room to pull straight in and open doors freely.
• General repair and quick-service shops that run a 10,000 lb mix and don't want the floor-plate compromise of a baseplate lift when their building doesn't force it.
• Owners upgrading from a baseplate or short lift who finally have the headroom — if your ceiling clears 12'8", the OHX10000X turns that clearance into open-floor, full-lift capability.

What the OHX10000X Is NOT Built For

• ❌ Low-ceiling bays under ~12' 8" — choose the BP10000X baseplate instead
• ❌ Buyers requiring ALI/ETL certification — choose the Atlas Platinum PVL-10 instead

What Makes the OHX10000X Different

Clear-Floor Overhead Design

The OHX10000X routes its equalizer cables through an overhead crossbar instead of across a floor plate, leaving the entire bay floor open between the columns. That clear floor means transmission jacks, drain pans, and creepers roll freely under the vehicle with nothing to trip over or work around — the daily difference between a smooth job and a tech stepping over a plate a dozen times a shift. At 152" overall (12'8") the overhead bar needs real ceiling height, but where you have it, that open floor turns clearance into faster, cleaner work and more bays turning per day.

Capacity & Lift Height

The OHX10000X pairs a full 10,000 lb capacity with extra-tall geometry — 152" overall and an 85 3/4" max lift using the adapters — to raise tall trucks, lifted vehicles, and full-size vans all the way up. That height is the point: instead of crouching under a vehicle that won't clear, your techs get comfortable standing room for the entire job. Heavy capacity plus genuine lift height means the OHX10000X handles your tallest, most awkward vehicles at a working height that keeps the job moving and the tech off their knees.

Bay Fit & Clearance

The OHX10000X is extra-wide — 144 3/8" across the floor with 118 1/4" inside the columns and a 106 7/8" drive-thru between the posts. That width lets wide-track trucks and full-size vehicles pull straight in and open their doors fully without the column boxing them in, which is exactly the loading room a busy bay needs. Confirming these dimensions against your bay layout up front — along with the 152" overhead clearance — means the lift fits your space and your vehicles before it ships, with no clearance surprises after install.

Included Truck Adapters

The OHX10000X ships with a 12-piece truck adapter set, so the tall trucks, vans, and frame-contact vehicles this lift is built for sit at the right height with the right pads from the day it goes into service. You're not sourcing stack adapters separately or improvising lift points on a full-size vehicle — the contact points are correct and safe out of the box. Having the adapters included, alongside the automatic arm restraints that lock the arms under load, means faster setup and safer, more repeatable lifts on every vehicle.

Power & Hydraulics

The OHX10000X runs on 220V, single-phase power with a 30-amp breaker — the same electrical spec as most shop welders and rotary-screw compressors. In most existing shops that means no dedicated panel upgrade and no electrician visit beyond running a line to the lift location. Standard single-phase power keeps install cost down and lets the lift drop into your shop's existing infrastructure instead of forcing an electrical project on top of the purchase. Simple power requirements mean a clean install, a lower total cost, and a professional lift working in your bay sooner.

Full Specifications — OHX10000X

Atlas® Warranty — OHX10000X

Atlas® backs the OHX10000X with comprehensive coverage. Every component is covered from the day it ships.

Warranty service is through Alamo Equipment & Service. When you buy from us, you are not waiting on a manufacturer hotline — call (844) 480-6059 and we handle it. Verify the model-specific warranty terms on the Atlas® spec sheet at purchase.