Challenger 12K Heavy-Duty 2-Post / Adjustable #CL12A-LC-DPC-QC

Challenger CL12A-LC-DPC-QC — 12,000 lbs 2-Post Lift

Most shops with 12-foot ceilings assume they're stuck at 10,000 lb capacity. The ceiling clears a 10K lift — barely — but the moment a heavier truck or loaded van rolls in, the lift is already at its limit. The Challenger CL12A-LC-DPC-QC is built for exactly that situation: a 12,000 lbs ALI/ETL certified 2-post lift engineered to an 11' 11" column height, fitting in the same 12-foot ceiling bay that rules out every standard 12K model.

The LC-DPC-QC adds dual pendant controls for independent operation at either column and QuickCycle rise time (38 seconds) for shops that rotate vehicles on a production schedule. Three adjustable width positions accommodate trucks, SUVs, and wider electric vehicles from the same bay. If your shop is turning away heavier vehicles because your lift is already at capacity, this is the model that solves the ceiling constraint without forcing a rebuild.

Who the CL12A-LC-DPC-QC Is Built For

• The shop running 12-foot ceilings that thought they had no 12K option — the CL12A-LC's 11' 11" column height is designed specifically for that constraint
• Repair bays servicing F-250s, Transit vans, Ram 2500s, and heavy SUVs where a 10K lift doesn't leave enough margin
• Operations upgrading from a lighter-duty lift and keeping their existing 12' bay without requiring structural modifications
• Fleet service centers that need ALI-certified documentation for safety compliance and insurance requirements
• Technicians who prefer dual pendant controls so each operator at either column has independent control during lifting and lowering
• High-throughput shops where the quick-cycle feature's 38-second rise reduces dead time between vehicle rotations

What the CL12A-LC-DPC-QC Is NOT Built For

• ❌ Bays with ceilings lower than 12' — no standard 2-post lift fits under that threshold
• ❌ Shops that primarily service passenger cars under 7,000 lbs where a 10K lift is more economical
• ❌ Facilities needing 15,000 lb or greater capacity — see the Challenger E15

What Makes the CL12A-LC-DPC-QC Different

Low-Ceiling 12,000 lb Clearfloor Design

The CL12A-LC is Challenger's purpose-built answer for 12-foot ceiling shops that can't fit a standard 12K 2-post. At 11' 11" overall height, it delivers the full 12,000 lb rated capacity and 80.75" rise — without forcing a ceiling modification or stepping down to a 10K lift. Shops that thought they were stuck at 10K now have a path to the capacity they actually need.

Adjustable Width for Wider Modern Vehicles

The columns set at three width positions during installation — standard, +6", and +12" — giving the bay flexibility for trucks, vans, SUVs, and today's wider electric vehicles. Three drive-thru clearance options (8' 7.5", 9' 1.5", 9' 7.5") let you match the bay to the vehicle mix rather than fitting every vehicle to a fixed lane. Adjustable width at install is a one-time setup that pays dividends across the life of the lift.

3-Stage Front and Rear Arms — 27.5" to 59" Reach

True 3-stage arms front and rear give the CL12A-LC a 27.5" to 59" arm reach range. That covers everything from a compact sedan's tight-underslung lift points to a long-wheelbase pickup's outboard support positions — in the same bay, without adapter swaps. For a bay that sees both a Civic and an F-150 in the same shift, this reach range is what makes both vehicles serviceable without frustration.

Dual Pendant Controls + QuickCycle

Dual pendant controls place lift operation at each column, so a technician on either side can raise or lower the vehicle without walking to a single fixed station. QuickCycle brings the rise time to 38 seconds — meaningful in a high-volume bay where a lift that's faster per cycle adds up across a full shift. Both features ship standard on the -DPC-QC configuration.

ALI/ETL Certified — Independently Verified Safety

The CL12A-LC carries ALI/ETL certification — independently tested against ANSI/ALI ALCTV safety standards, the same standard OSHA references. For shops where lift certification is a compliance requirement or insurance mandate, the CL12A-LC delivers 12K clearfloor capability with the certification that matters. Challenger's manufacturer page explicitly confirms ALI certification for the CL12A and CL12A-LC models.

Full Specifications — CL12A-LC-DPC-QC

Challenger Warranty — CL12A-LC-DPC-QC

Challenger backs the CL12A-LC-DPC-QC with comprehensive coverage per the official Challenger warranty terms published at challengerlifts.com.

Warranty service is through Alamo Equipment & Service. When you buy from us, you are not waiting on a manufacturer hotline — call (844) 480-6059 and we handle it. Wear items and accessories carry 90-day coverage per the Challenger warranty terms.