FS-Curtis CA13-H 13HP 30G Horizontal Honda Gas Drive Air Compressor #CA13-H
Couldn't load pickup availability
FS-Curtis Shipping
Equipment and Parts: Free Shipping
| Model / Part Number | CA13-H |
| Horsepower | 13 HP (Gas) |
| Tank | 30 Gallon Horizontal ASME |
| Airflow | 22 CFM @ 175 PSI |
| Pressure Range | 175 PSI |
| Warranty | 12 months |
FS-Curtis CA13-H — 13 HP (Gas) Air Compressor
A shop working in a location without reliable electrical service — a job site, a barn, a remote bay — needs a compressor that doesn't care whether there's power nearby at all.
The FS-Curtis CA13-H is a gas-powered, two-stage reciprocating compressor rated for 13 HP (Gas) with a 30 gallon horizontal ASME tank, built for shops and commercial operations that need compressed air on tap all day without paying for accessories they don’t need.
Who the CA13-H Is Built For
- ✅ A mobile or job-site operation working in locations without reliable electrical service, where a gas engine means the compressor runs regardless of power availability
- ✅ A shop or farm building without existing electrical infrastructure where running new wiring would cost more than the compressor itself
- ✅ An operator who needs backup air capability during a power outage that would otherwise shut down every electric compressor in the building
- ✅ A buyer wanting Honda engine reliability specifically, versus the Kohler option on the CA14-K
- ✅ A shop with occasional need for portable, self-contained air supply that doesn't require running an extension cord or new circuit
What the CA13-H Is NOT Built For
- ❌ Shops with reliable, adequate electrical service already in place — an electric CA5/CA7.5/CA10 unit runs quieter, without fuel costs, and without exhaust
- ❌ Indoor use without proper ventilation — gas engines produce exhaust that must be vented
- ❌ Shops wanting the highest CFM per dollar — at 22 CFM for a 13 HP engine, this trades some efficiency for the gas-powered flexibility
What Makes the CA13-H Different
Commercial 2-Stage Pump
The CA13-H uses an E57, Cast-Iron, Two-Stage pump built for daily, all-day duty cycles — not a hobby-grade single-stage unit that struggles under continuous shop use.
CFM & Pressure Output
Delivers 22 CFM @ 175 PSI and holds pressure up to 175 PSI, enough headroom to run impact wrenches, tire equipment, and paint tools without the tank running dry.
Power Requirements
gas-powered (Honda engine), no electrical hookup required.
- No electrical hookup needed
- Job-site / remote-location use
- Honda engine reliability
- Shops with reliable power already
- Indoor use without ventilation
CA13-H vs. Atlas AF13G (13 HP Gas, Honda Engine) — Which Compressor Is Right for Your Shop?
| Decision Point | CA13-H | Atlas AF13G (13 HP Gas, Honda Engine) |
|---|---|---|
| Horsepower / Tank | 13 HP (Gas) / 30 Gal Horizontal | 13 HP (Gas) / 30 Gal |
| CFM @ 175 PSI | 22 CFM | Confirm current CFM spec with Alamo |
| Engine | Honda | Honda |
| Best fit | Shops wanting FS-Curtis's CA Series build quality on a gas unit | Shops wanting Atlas's gas-compressor lineup |
Choose the CA13-H for FS-Curtis's build quality and pump platform on a Honda-powered gas unit. Choose the Atlas AF13G if you're already standardized on Atlas equipment elsewhere in the shop. Both stay inside Alamo’s catalog — call (844) 480-6059.
Full Specifications — CA13-H
| Model / Part Number | CA13-H |
| Horsepower | 13 HP (Gas) |
| Pump | E57, Cast-Iron, Two-Stage |
| Configuration | Gas-Powered, Two-Stage Reciprocating |
| Tank | 30 Gallon Horizontal ASME |
| Airflow | 22 CFM @ 175 PSI |
| Pressure Range | 175 PSI |
| Overall Dimensions | 50" L x 24" W x 50" H |
| Shipping Weight | 460 lbs |
| Warranty | 12 months |
⚠️ Setup Requirements
- Electrical: gas-powered (Honda engine), no electrical hookup required.
- Floor space: 50" L x 24" W x 50" H footprint; plan clear access on at least two sides for maintenance and tank drain.
- Ventilation: Locate in a dry, ventilated area away from dust and moisture to protect the pump and tank.
- Weight: 460 lbs shipping weight — confirm your floor/dock can receive and position the unit.
- Setup: Installation is available as a quoted service (piping, electrical tie-in, functional test) — it’s not included in the purchase price. Call (844) 480-6059 for an install quote if you’d like Alamo’s crew to set it up.
FS-Curtis Warranty — CA13-H
FS-Curtis backs the CA13-H with a 1-year parts-only warranty.
| Component | Coverage Term |
|---|---|
| Tank & pump | 1 year parts |
| Motor & electrical components | 1 year parts |
| Wear items (belts, filters, gaskets) | Not covered (consumable) |
Warranty service is through Alamo Equipment & Service — call (844) 480-6059 instead of waiting on a manufacturer hotline. Coverage is subject to FS-Curtis warranty terms, conditions, and requirements.
Frequently Asked Questions — FS-Curtis CA13-H
Why Buy the CA13-H from Alamo Equipment & Service?
- Installation available. Buying online gets you the compressor — piping and electrical tie-in are an extra-charge service. We have the crews to install it and can quote that separately; call (844) 480-6059 for a quote.
- We service it. These compressors need preventative maintenance up to 4x a year per the manufacturer — oil changes, belt and air filter checks, contactor and electrical inspection. Call (844) 480-6059 for maintenance, repairs, or support — and if you ever need warranty work, we register your equipment with the manufacturer and handle the claim directly, so you’re not stuck navigating vendor support on your own.
- We size it with you. 13 HP (Gas), 30 Gallon Horizontal ASME tank, 22 CFM @ 175 PSI — we’ll confirm this matches your shop’s actual air draw before you order.
- Free shipping. Ships free to the 48 contiguous states.
- Expert comparison help. Not sure if the CA13-H or the Atlas AF13G (13 HP Gas, Honda Engine) is the better fit? We’ll walk you through it.
A shop buying from a pure e-commerce retailer gets a box. A shop buying from Alamo gets a partner.
Shipping Rates and Delivery Estimates: Shipping is FREE to the 48 contiguous United States.
Shipment Processing Time: All orders are processed within [2–3] business days of receipt, excluding weekends and holidays. Orders are not processed or shipped from Friday at 12 pm CST through Sunday or on holidays. During periods of high order volume, shipments may be delayed by a few days. Customers will be notified via email or phone in the event of significant delays.
See the attached document for FS CURTIS WARRANTY