FS-Curtis ML10 200G 10HP(2) Duplex Ultra Pack Air Comp #ML10-DUP
Couldn't load pickup availability
FS-Curtis Shipping
Equipment and Parts: Free Shipping
| Model / Part Number | ML10 Duplex Ultra Pack |
| Horsepower | 10 HP (x2, Duplex) |
| Tank | 200 Gallon Horizontal ASME |
| Airflow | 79.6 CFM @ 175 PSI |
| Pressure Range | 175 PSI |
| Warranty | 12 months |
FS-Curtis ML10-DUP — 10 HP (x2, Duplex) Air Compressor
The busiest commercial facilities need both the redundancy of a duplex pump setup and the factory-installed air-quality accessories that keep a high-volume operation running without someone manually draining tanks between shifts.
The FS-Curtis ML10-DUP is a duplex two-stage reciprocating, ultra pack compressor rated for 10 HP (x2, Duplex) with a 200 gallon horizontal ASME tank, built for multi-bay shops and commercial operations that need compressed air on tap all day. The included Ultra Pack — factory-installed automatic tank drain and refrigerated air dryer — cuts down on the maintenance routine so your team spends less time babysitting the compressor and more time on paying work.
Who the ML10-DUP Is Built For
- ✅ A large commercial or fleet facility running multiple shifts where a compressor outage stops every bay at once, and the second pump keeping the line running pays for itself the first time it's needed
- ✅ A high-volume paint or finishing operation where an aging single compressor has already failed mid-job, ruining work from an interrupted or moisture-laden air supply
- ✅ A facility that's grown past what a simplex unit can support and needs both more combined CFM and the uptime insurance of a second pump, plus the factory-installed dryer
- ✅ An operator who's already standardized on FS-Curtis's ML Series at other locations and wants the top Ultra Pack duplex tier for the highest-volume shop in the group
- ✅ A facility manager budgeting for planned expansion who'd rather buy the headroom and accessories now than upgrade twice
What the ML10-DUP Is NOT Built For
- ❌ Single-bay or mid-size shops — this is the most expensive configuration in the ML10 line and is overkill for lighter demand
- ❌ Budget-conscious buyers — the base ML10-D duplex without Ultra Pack saves meaningfully if accessories aren't needed yet
- ❌ Shops with limited floor space — still a large-footprint duplex unit even with the smaller of the two ML10 duplex tank layouts
What Makes the ML10-DUP Different
Commercial 2-Stage Pump
The ML10-DUP uses a D97 (x2), Cast-Iron, Two-Stage pump built for daily, all-day duty cycles — not a hobby-grade single-stage unit that struggles under continuous shop use.
CFM & Pressure Output
Delivers 79.6 CFM @ 175 PSI and holds pressure up to 175 PSI, enough headroom to run impact wrenches, tire equipment, and paint tools without the tank running dry.
Ultra Pack Upgrades
Includes factory-installed automatic tank drain and refrigerated air dryer — upgrades that reduce maintenance and extend the life of the tank and pump versus a base-model compressor.
Power Requirements
Three-Phase only, 230V/460V options available. Confirm your panel and breaker sizing with an electrician before delivery.
- Redundancy + factory accessories
- 79.6 CFM combined output
- Highest-volume commercial facilities
- Single-bay / mid-size shops
- Budget-first buyers
ML10-DUP vs. FS-Curtis CA10-VUP (10 HP, 120 Gal Vertical, Ultra Pack) — Which Compressor Is Right for Your Shop?
| Decision Point | ML10-DUP | FS-Curtis CA10-VUP (10 HP, 120 Gal Vertical, Ultra Pack) |
|---|---|---|
| Horsepower / Tank | 10 HP x2 / 200 Gal Horizontal | 10 HP / 120 Gal Vertical |
| CFM @ 175 PSI | 79.6 CFM | 34.2 CFM |
| Redundancy + accessories | Duplex pumps + Ultra Pack bundle (auto-drain/dryer) | Simplex + Ultra Pack bundle |
| Best fit | Highest-volume facilities wanting redundancy and factory accessories together | Shops wanting a smaller footprint at a lower price |
Choose the ML10-DUP for the most fully-equipped, redundant setup in the ML10 line. Choose the FS-Curtis CA10-VUP for a simpler single-pump setup at a much lower price if redundancy isn't required. Both stay inside Alamo’s catalog — call (844) 480-6059.
Full Specifications — ML10-DUP
| Model / Part Number | ML10 Duplex Ultra Pack |
| Horsepower | 10 HP (x2, Duplex) |
| Pump | D97 (x2), Cast-Iron, Two-Stage |
| Configuration | Duplex Two-Stage Reciprocating, Ultra Pack |
| Tank | 200 Gallon Horizontal ASME |
| Airflow | 79.6 CFM @ 175 PSI |
| Pressure Range | 175 PSI |
| Motor / Electrical | Three-Phase only, 230V/460V options available |
| Phase / Hz / Voltage |
Three Phase: 3/60/200-208V (FML10D97D2U-A9L1XX) |
| Ultra Pack Features | factory-installed automatic tank drain and refrigerated air dryer |
| Overall Dimensions | 90" L x 37" W x 64" H |
| Shipping Weight | 1950 lbs |
| Warranty | 12 months |
⚠️ Setup Requirements
- Electrical: Three-Phase only, 230V/460V options available; have an electrician confirm your panel capacity before delivery.
- Floor space: 90" L x 37" W x 64" H footprint; plan clear access on at least two sides for maintenance and tank drain.
- Ventilation: Locate in a dry, ventilated area away from dust and moisture to protect the pump and tank.
- Weight: 1950 lbs shipping weight — confirm your floor/dock can receive and position the unit.
- Setup: Installation is available as a quoted service (piping, electrical tie-in, functional test) — it’s not included in the purchase price. Call (844) 480-6059 for an install quote if you’d like Alamo’s crew to set it up.
FS-Curtis Warranty — ML10-DUP
FS-Curtis backs the ML10-DUP with a 1-year parts-only warranty.
| Component | Coverage Term |
|---|---|
| Tank & pump | 1 year parts |
| Motor & electrical components | 1 year parts |
| Ultra Pack accessories (auto tank drain, refrigerated air dryer) | 1 year parts |
| Wear items (belts, filters, gaskets) | Not covered (consumable) |
Warranty service is through Alamo Equipment & Service — call (844) 480-6059 instead of waiting on a manufacturer hotline. Coverage is subject to FS-Curtis warranty terms, conditions, and requirements.
Frequently Asked Questions — FS-Curtis ML10-DUP
Why Buy the ML10-DUP from Alamo Equipment & Service?
- Installation available. Buying online gets you the compressor — piping and electrical tie-in are an extra-charge service. We have the crews to install it and can quote that separately; call (844) 480-6059 for a quote.
- We service it. These compressors need preventative maintenance up to 4x a year per the manufacturer — oil changes, belt and air filter checks, contactor and electrical inspection. Call (844) 480-6059 for maintenance, repairs, or support — and if you ever need warranty work, we register your equipment with the manufacturer and handle the claim directly, so you’re not stuck navigating vendor support on your own.
- We size it with you. 10 HP (x2, Duplex), a 200 gallon horizontal ASME tank, 79.6 CFM @ 175 PSI — we’ll confirm this matches your shop’s actual air draw before you order.
- Free shipping. Ships free to the 48 contiguous states.
- Expert comparison help. Not sure if the ML10-DUP or the FS-Curtis CA10-VUP (10 HP, 120 Gal Vertical, Ultra Pack) is the better fit? We’ll walk you through it.
A shop buying from a pure e-commerce retailer gets a box. A shop buying from Alamo gets a partner.
Shipping Rates and Delivery Estimates: Shipping is FREE to the 48 contiguous United States.
Shipment Processing Time: All orders are processed within [2–3] business days of receipt, excluding weekends and holidays. Orders are not processed or shipped from Friday at 12 pm CST through Sunday or on holidays. During periods of high order volume, shipments may be delayed by a few days. Customers will be notified via email or phone in the event of significant delays.
See the attached document for FS CURTIS WARRANTY