Mahle ShopPRO CWD-600 Wheel Dolly 600 lb #485-80165-00
| Model / Part Number | 485-80165-00 |
| Product Type | Wheel Dolly |
| Capacity | 600 lbs (272 kg) |
Mahle CWD-600 — Wheel Dolly
Large truck, dual, and super single wheel-and-tire assemblies are heavy and awkward to handle by hand during removal or installation, and doing it without a dedicated dolly means more strain on techs and more risk to expensive wheels and hubs.
The CWD-600 handles wheel assemblies up to 600 lbs with an adjustable wheel cradle that fits a wide range of tire sizes and configurations. Internal bearing rotation and a fore-and-aft tilt function let techs precisely align the wheel even on uneven surfaces, and three swivel casters plus an offset column design give excellent mobility and open workspace access around the hub — built for high-volume service shops and fleet maintenance facilities.
Who the CWD-600 Is Built For
- ✅ A fleet shop pulling and remounting dual and super single wheels all day needs a dolly built for that exact weight and width range instead of two techs muscling a wheel by hand
- ✅ A shop that's had a tech strain their back lifting a heavy truck wheel solo wants a dedicated dolly to remove that risk from the daily routine
- ✅ A shop servicing a mix of tire sizes across different truck models needs the adjustable wheel cradle instead of stocking separate handling equipment for each size
- ✅ A shop with an uneven or sloped floor in part of the bay needs the fore-and-aft tilt function to keep wheel alignment accurate even when the ground isn't level
- ✅ A tech working around a hub during reinstall needs the offset column's open workspace so tools and hands aren't fighting the dolly frame for access
What the CWD-600 Is NOT Built For
- ❌ Wheel assemblies exceeding the 600 lb capacity — step up to the CWD-1500 for heavier work
- ❌ Tires under the 30" minimum diameter this dolly is built for
What Makes the CWD-600 Different
Adjustable Wheel Cradle Width
Fits a wide range of tire sizes and configurations on the same dolly.
Internal Bearing Rotation
Enables smooth positioning and alignment of wheels during service.
Offset Column Design
Creates an open workspace around the hub for easier access during wheel service.
- A fleet shop pulling and remounting dual and super single wheels all day needs a dolly built for that exact weight and width range instead of two techs muscling a wheel by hand
- A shop that's had a tech strain their back lifting a heavy truck wheel solo wants a dedicated dolly to remove that risk from the daily routine
- A shop servicing a mix of tire sizes across different truck models needs the adjustable wheel cradle instead of stocking separate handling equipment for each size
- Wheel assemblies exceeding the 600 lb capacity — step up to the CWD-1500 for heavier work
- Tires under the 30" minimum diameter this dolly is built for
Is the CWD-600 the Right Wheel Dolly for Your Shop?
| Capacity | 600 lbs (272 kg) |
| Minimum Tire Diameter | 30" |
| Tilt Function | Fore and aft |
| Mobility | Three swivel casters |
Choose the CWD-600 for fleet and commercial shops regularly handling large truck, dual, and super single wheel assemblies up to 600 lbs. Have questions about whether the CWD-600 fits your specific job? Call (844) 480-6059.
Full Specifications — CWD-600
| Part Number | 485-80165-00 |
| Minimum Tire Diameter | 30" |
| Wheel Cradle | Adjustable width |
| Bearing Rotation | Internal |
| Tilt Function | Fore and aft |
| Mobility | Three swivel casters |
| Construction | Heavy-duty steel |
⚠️ Setup Requirements
- Weight: confirm your dock/receiving area and shop floor can handle this unit’s shipping weight before delivery.
- Setup: This is freestanding shop equipment — no fixed bay installation required. Call (844) 480-6059 if you have questions about setup or positioning.
Mahle Warranty — CWD-600
Warranty coverage for the CWD-600 has not been independently verified from an official Mahle source at this time. Call Alamo at (844) 480-6059 to confirm the current warranty terms before you order.
Frequently Asked Questions — Mahle CWD-600
Why Buy the CWD-600 from Alamo Equipment & Service?
- Installation available. This is freestanding equipment — no bay install needed, but call (844) 480-6059 if you have questions about setup or fit.
- We service it. Call (844) 480-6059 for maintenance, repairs, or support — and if you ever need warranty work, we register your equipment with the manufacturer and handle the claim directly, so you’re not stuck navigating vendor support on your own.
- We size it with you. 600 lb capacity with an adjustable wheel cradle for a range of tire sizes — call and we'll confirm it fits your typical wheel assemblies.
- Free shipping. This item ships free.
A shop buying from a pure e-commerce retailer gets a box. A shop buying from Alamo gets a partner.
- Free shipping on all parts within the continental United States.
- Most orders ship within 24–48 hours.
- Tracking information will be emailed once your order ships.