Stratus 9k lbs Overhead Single Point Manual Release 2-Post Car Lift #SAE-C9P

Stratus SAE-C9P — 9,000 lbs 2-Post Lift

A lot of shops adding a 9,000 lb bay don't need every premium feature a top-tier lift offers — they need dependable capacity, a clear floor, and a price that makes the expansion pencil out. The Stratus SAE-C9P is built for that shop: a 9,000 lb overhead clearfloor 2-post with direct-drive cylinders and single-point manual release, priced well under premium certified alternatives while still backed by a 5-year structural warranty.

The SAE-C9P's overhead design keeps the floor between the columns clear for underbody work, and its direct-drive cylinders reduce the moving parts in the drive system compared to chain-drive designs. The included 4-piece truck adapter set extends max lift height from 74 3/4" to 78 7/8" for taller vehicles. Call Alamo at (844) 480-6059 to confirm your bay's ceiling clearance before ordering.

Who the SAE-C9P Is Built For

• The shop adding a second or third bay on a defined budget that needs a dependable 9,000 lb overhead lift without paying for ALI certification it doesn't need for its compliance situation
• General repair technicians servicing sedans, crossovers, and light trucks where the 9K capacity ceiling is rarely tested by the actual vehicle mix
• Shops that specifically prefer direct-drive over chain-drive cylinder architecture — fewer chain, sheave, and cable-tension components to maintain over the years
• Owner-operators who value Stratus's 5-year structural warranty term, which is longer than several competing value-tier brands at this capacity
• Bays where single-point manual release is the preferred safety-release style and a straightforward overhead clearfloor design is all the lift needs to do

What the SAE-C9P Is NOT Built For

• ❌ Shops that require ALI/ETL third-party certification for compliance, insurance, or franchise documentation — the SAE-C9P is not ALI listed
• ❌ Bays with ceilings under 13 feet — confirm the lowest obstruction in your bay before ordering
• ❌ Shops that need the fastest available rise time — the SAE-C9P runs a standard ~50-second cycle, not a quick-cycle platform

Questions about fit or capacity? Call Alamo at (844) 480-6059.

What Makes the SAE-C9P Different

9,000 lb Overhead Clearfloor — Straightforward Value Platform

The SAE-C9P's 9,000 lb capacity covers the realistic weight range of passenger cars, crossovers, and light trucks that make up most general-repair shop traffic. The overhead design keeps the crossbar above the work zone and the floor between the columns completely open — no cable, no plate, nothing to work around while a tech is underneath the vehicle.

Direct Drive Cylinders — Simpler Mechanical System

The SAE-C9P uses direct-drive hydraulic cylinders — the cylinder pushes the carriage directly rather than through a chain-and-pulley system. That reduces the number of wear components in the drive mechanism, which translates to less routine maintenance (no chain tension checks, no sheave lubrication) across the lift's service life.

Single-Point Manual Release — Straightforward Operation

The SAE-C9P's single-point manual release lets the operator lower the lift from one control location without needing to coordinate release on both columns separately. Combined with 2 top limiter switches that stop cylinder travel at the safe working height, the release system is designed for straightforward, repeatable operation in a busy shop.

CE-Tested Structure — 115% Dynamic, 150% Static Load Capacity

The SAE-C9P's structure and hydraulic system are proofed by dynamic testing at 115% of rated capacity and static testing at 150% of rated capacity — independent verification behind the 9,000 lb rating. Anti-surge valves in the hydraulic circuit help manage pressure spikes during operation, protecting the cylinder seals over repeated lift cycles.

Stratus 5/3/2-Year Warranty

Stratus backs the SAE-C9P with a 5-year structural components warranty, 3-year hydraulic components warranty, and 2-year electrical parts warranty. For a value-tier 9K lift, that structural term is longer than what several competing brands offer at this price point. Alamo handles warranty service directly — call (844) 480-6059 with any questions.

Full Specifications — SAE-C9P

Stratus Warranty — SAE-C9P

Stratus backs the SAE-C9P with a 5-year structural components warranty, 3-year hydraulic components warranty, and 2-year electrical parts warranty. This warranty applies to the full Stratus SAE 2-post lineup.

Warranty service is through Alamo Equipment & Service. When you buy from us, you are not waiting on a manufacturer hotline — call (844) 480-6059 and we handle it.