AMGO® 7,000 lb Mobile Mid-Rise Scissor Lift #MRL07
AMGO® Hydraulics shipping quote
Shipping is quoted by destination before payment. Select your options, then request your freight quote.
We will confirm the shipping total before sending a payment link.
| Model | MRL07 |
| Capacity | 7,000 lbs |
| Lift Type | Portable Mid-Rise Scissor Lift |
| Maximum Lifting Height | 42-1/8" |
| Minimum Height | 4-5/8" |
| Maximum Lock Height | 39-3/4" |
| Overall Length with Ramps | 80-1/2" |
| Overall Width | 76-7/8" |
| Motor / Electrical | 1 HP, 110V |
| Air Supply Required | No |
| Gross Weight | 1,153 lbs |
| Power Unit Certification | ETL-Certified AMGO Power Unit |
| Warranty | AMGO 5-3-2 Warranty |
- Use on a solid, level service-bay floor
- Check floor condition before positioning the lift
- Keep the operating area free of obstructions
- Follow the current AMGO manual for final setup requirements
- Current MRL07 specification: 1 HP, 110V
- ETL-certified AMGO power unit
- AMGO also lists compatible 220V power-unit options for MRL07 applications
- Verify the supplied power-unit nameplate before electrical connection
- 80-1/2" overall length including ramps
- 76-7/8" overall width
- 42-1/8" maximum lifting height
- Allow additional room around the lift for technician access
AMGO MRL07 7,000 lb Mobile Mid-Rise Scissor Lift
The AMGO MRL07 is a portable 7,000 lb mid-rise scissor lift designed for tire service, body work and quick-service operations where technicians need more working height than a low-rise lift without dedicating a bay to a fixed full-rise system.
Its 4-5/8" minimum height helps accommodate low-clearance vehicles, while the 42-1/8" maximum lift height provides convenient access for wheel, brake and lower-body service. The flexible approach ramps can also function as platform extensions when additional vehicle support length is needed.
The MRL07 does not require compressed air for its safety release. AMGO uses an auto-release mechanical locking system, allowing the lift to operate without an external air source.
Who the MRL07 Is Built For
- Quick-service bays performing brake, tire and wheel work
- Body shops needing easier access to rocker panels and lower body sections
- Shops that want to move one lift between multiple service bays
- Facilities without shop air available at every bay
- Low-clearance cars through compatible pickups within the 7,000 lb rated capacity
What the MRL07 Is NOT Built For
- Vehicles exceeding the 7,000 lb rated capacity
- Full-height underbody service requiring standing room beneath the vehicle
- Applications requiring a lift specifically documented as ALI certified
- Vehicles whose approved lifting points cannot be safely supported by the MRL07 platforms and pads
What Makes the MRL07 Different
Air-Free Mechanical Lock Release
AMGO's auto-release mechanical lock system eliminates the need to connect the MRL07 to an external compressed-air source for lock release.
Portable Mid-Rise Design
The lift is designed to be repositioned between service areas, giving shops more flexibility than a permanently dedicated scissor-lift bay.
4-5/8" Low Profile
The compact lowered height helps the lift reach underneath lower-clearance passenger vehicles while still supporting compatible trucks and SUVs within its rated capacity.
Dual Torsion-Bar Synchronization
AMGO uses dual torsion bars to help synchronize platform movement and keep the two sides level during operation.
Flexible Ramps Double as Platform Extensions
The drive-in ramps can also serve as extension platforms, increasing usable support length when the vehicle's lifting-point layout requires it.
Two Rubber Pad Heights Included
AMGO includes 1-1/2" and 3" rubber pads to help accommodate different vehicle lifting-point heights.
- Tire and brake service
- Body and rocker-panel work
- Quick-service bays
- Shops needing portable equipment
- Bays without compressed-air connections
- Full standing-height undercar work
- Vehicles over 7,000 lbs
- Applications requiring documented ALI certification
- Vehicles with unsuitable or inaccessible lifting points
Full Specifications - MRL07
| Model | MRL07 |
| Lifting Capacity | 7,000 lbs |
| Lift Type | Portable Mid-Rise Scissor Lift |
| Maximum Lifting Height | 42-1/8" |
| Minimum Height | 4-5/8" |
| Maximum Lock Height | 39-3/4" |
| Overall Length Including Ramps | 80-1/2" |
| Runway Length | 57-15/16" |
| Overall Width | 76-7/8" |
| Width Between Runways | 31-1/2" |
| Motor | 1 HP |
| Electrical | 110V |
| Air Supply | Not Required |
| Safety Lock | Auto-Release Mechanical Locks |
| Platform Synchronization | Dual Torsion Bars |
| Included Rubber Pads | 1-1/2" and 3" |
| Gross Weight | 1,153 lbs |
| Power Unit Certification | ETL-Certified AMGO Power Unit |
⚠️ Setup Requirements
- Vehicle weight: Do not exceed the 7,000 lb rated capacity.
- Lifting points: Position the supplied rubber pads only at approved vehicle lifting points.
- Floor: Operate the lift on a solid, level surface in accordance with AMGO's current manual.
- Electrical: Current MRL07 specifications list a 1 HP 110V power unit. Verify the supplied unit's nameplate before connecting power.
- Air: No compressed-air connection is required for the mechanical lock release.
- Installation: Setup and installation assistance is available via quote. Call (817) 865-3707.
AMGO Warranty - MRL07
AMGO currently applies its 5-3-2 manufacturer warranty program to the MRL07.
| Component | Coverage Term |
|---|---|
| Steel Structure Components | 5 Years |
| Hydraulic Parts | 3 Years |
| Other Parts, Electrical Components & Power Unit | 2 Years |
AMGO's current warranty policy, exclusions and claim requirements apply. Review the warranty card supplied with the lift and the manufacturer's current warranty policy for complete terms.
❓ Frequently Asked Questions - MRL07
Does the AMGO MRL07 require compressed air?
No. The MRL07 uses auto-release mechanical locks and does not require an external compressed-air source for lock release.
How high does the MRL07 lift?
AMGO lists a maximum lifting height of 42-1/8" and a maximum mechanical lock height of 39-3/4".
What is the lowered height of the MRL07?
The minimum height is 4-5/8", allowing the lift to fit under many low-clearance vehicles.
What power does the MRL07 use?
AMGO's current MRL07 specification lists a 1 HP 110V motor. AMGO also lists compatible 220V manual power units for the MRL07, so verify the power-unit nameplate on the exact configuration being supplied.
Is the MRL07 ALI certified?
AMGO's current MRL07 product page identifies the AMGO power unit as ETL certified but does not list the MRL07 lift itself as ALI certified. If ALI certification is required for your facility, confirm before ordering.
What warranty does AMGO provide?
AMGO currently lists 5 years on steel structure components, 3 years on hydraulic parts, and 2 years on other parts, electrical components and the power unit.
Why Buy the MRL07 from Alamo Equipment & Service?
- We help verify vehicle fit. Call us with the vehicles you intend to service and we can help review capacity and lift-point requirements.
- Setup assistance is available. We can help confirm electrical, placement and shop-clearance requirements before delivery.
- We help compare lift styles. If you need more working height, Alamo can compare the MRL07 with full-rise scissor and two-post alternatives.
- Parts and service support. Call Alamo after the sale when you need equipment service or replacement parts.
Questions before ordering? Call (817) 865-3707.
Shipping is quoted by destination before payment. Select your product options and request a freight quote above. We will confirm the freight method and total before sending a payment link.