AMGO® 1,200 lb Air Motorcycle Lift #MC-1200P

SKU: ALMAMGMC1200P
Regular price $1,200.00
Equipment ROI planner Estimate time and throughput value Choose added capacity or labor savings, then use your own shop numbers.
In stock
On backorder

AMGO shipping quote

Shipping is quoted by destination before payment. Select your options, then request your freight quote.

Call (844) 480-6059

We will confirm the shipping total before sending a payment link.

Manuals & Resources
Need installation help? Call Alamo at (844) 480-6059 - we install, service, and inspect every lift we sell.
Quick Specs - AMGO® MC-1200P 1,200 lb Air Motorcycle Lift
Model MC-1200P
Lifting Capacity 1,200 lbs
Lift Type Pneumatic Motorcycle Lift
Max Lifting Height 42 15/16"
Minimum Height 6 1/8"
Power Air source, up to 0.6 MPa
Freight quoted per order — call for a shipping rate. Call (844) 480-6059 - Alamo's team will walk you through setup before you order.
Site Prep - What Your Bay Needs Before It Arrives
Have these ready and setup goes smoother. If one is uncertain, call us first.
Concrete / Floor
  • Level, load-rated shop floor
  • Portable — no need to fix; no fixed concrete anchor spec required per the AMGO manual
  • Indoor use
Power
  • Shop air source, up to 0.6 MPa (no electrical supply needed)
  • Oil-water separator recommended on the air line
  • Pneumatic hydraulic pump included
Placement
  • Portable — moves to any bay
  • Includes front wheel vise and drive-in ramp
  • Non-skid diamond platform
Alamo Sets Up Every Lift We Sell
We deliver it, set it in your bay, and make sure it runs right. One number, one invoice, no chasing contractors.
(844) 480-6059
Talk to Alamo's team

AMGO® MC-1200P 1,200 lb Air Motorcycle Lift

The AMGO® MC-1200P is a 1,200 lb pneumatic motorcycle lift — the air-powered version of the MC-1200. A pneumatic hydraulic pump raises the deck from a shop air source rated up to 0.6 MPa, so no electrical connection is required.

It shares the same non-skid diamond platform, front wheel vise, drive-in ramp and mechanical hand-release safety lock, and stays fully portable.

Who It's Built For

  • Air-equipped motorcycle and powersport shops
  • Bikes within the 1,200 lb rating
  • Bays with shop air but limited power
  • Techs wanting a built-in wheel vise
  • Shops preferring pneumatic operation

What It's NOT Built For

  • Cars, trucks or ATVs beyond a motorcycle footprint
  • Loads above 1,200 lbs
  • Shops with no compressed-air supply
  • Outdoor installation
  • Permanent anchored duty

Key Differentiator: Pneumatic air-powered lifting

A pneumatic hydraulic pump runs the MC-1200P off shop air (up to 0.6 MPa) with no electrical hookup, unlike the electric MC-1200.

Best For
  • Air-equipped shops with limited power
Not Ideal For
  • Shops with no compressed-air supply

How the MC-1200P Compares - Which AMGO Motorcycle Lift Fits Your Shop?

Model Capacity Power Minimum Height
MC-1200P 1,200 lb Pneumatic (air) 6 1/8"
MC-1200 1,200 lb Electric 110V 6 1/8"

All models stay inside Alamo's catalog (comparison links go live as siblings publish). Call (844) 480-6059 and we will help you choose before ordering.

Full Specifications – MC-1200P

Brand AMGO® Hydraulics
Model MC-1200P
Part / SKU ALMAMGMC1200P
Lifting Capacity 1,200 lbs
Design Pneumatic Motorcycle Lift
Lifting Time 23 s
Max Lifting Height 42 15/16"
Max Lock Height 40 9/16"
Minimum Height 6 1/8"
Overall Length 106 5/16"
Runway Length 88 9/16"
Overall Width 29 1/2"
Power Pneumatic hydraulic pump, air source up to 0.6 MPa
Included Front wheel vise, drive-in ramp, pneumatic pump
Shipping Carton 90" x 30" x 13"
Shipping Weight 530 lbs

Installation & Setup

  • Placement: Level, load-rated indoor floor; portable, no anchoring required
  • Air: Shop air source up to 0.6 MPa; fit an oil-water separator on the line
  • Power: No electrical connection required

AMGO 5-3-2 Limited Warranty – MC-1200P

AMGO Hydraulics stands behind this lift with a strong limited warranty covering defects in materials and workmanship under normal service. Coverage applies across the 48 contiguous states.

Term Component Group What It Covers
5 Years Steel Structure Components Columns, carriages, scissor frames, platforms, arms and structural steel
3 Years Hydraulic Parts Cylinders, oil seals, hoses, bronze bushings, slider blocks and fittings
2 Years Electrical & Cables Electrical components and cables (rubber pads are a wear item and excluded)

Alamo Equipment administers your warranty directly — call (844) 480-6059 and we coordinate parts and claims with AMGO for you.

Coverage excludes consumable wear items such as rubber pads and is voided by loading past the rated capacity or repairs using non-OEM parts. Confirm exact coverage at the time of purchase.

Frequently Asked Questions - MC-1200P

What capacity is the AMGO MC-1200P?

The MC-1200P is rated for 1,200 lbs.

How is the MC-1200P powered?

By a pneumatic hydraulic pump running off a shop air source rated up to 0.6 MPa — no electricity required.

What is the difference between the MC-1200 and MC-1200P?

Same platform and capacity; the MC-1200 uses a 110V electric pump while the MC-1200P runs on shop air.

Why Buy the MC-1200P from Alamo Equipment & Service?

  • We set it up. Our crew delivers and commissions it in your bay.
  • We service it. Parts and warranty run through our shop, not a hotline.
  • We size it with you. Tell us your vehicles and space; we confirm the fit.
  • Straight answers. We will point you to a better-value model when one exists.
  • Call for Shipping. Freight is quoted per order so you pay the real rate — (844) 480-6059.

A shop buying from a pure e-commerce retailer gets a box. A shop buying from Alamo gets a partner.

AMGO shipping is quoted by destination before payment. Select your product options and request a freight quote above. We will confirm the shipping total before sending a payment link.