APlusLift Falcon 9000LB 4-Post Storage Car Lift #AP-9H

APlusLift Falcon AP-9H 9,000 lb 4-Post Lift

A one-car garage that needs to hold two vehicles usually means choosing between a cramped daily shuffle or a lift that costs more than the problem calls for. The Falcon AP-9H is built for that exact squeeze: a 9,000 lb 4-post platform sized to park, store, or service a second vehicle overhead without needing a permanent commercial-grade install.

Its standard-size layout measures 179" long by 114" wide and provides a 93" drive-through opening. The lift uses a 110V single-phase 1.5 HP hydraulic power unit and cable synchronization. A caster kit is included for repositioning the lift, while the jack tray allows one end of the vehicle to be raised separately for service work.

Who the AP-9H Is Built For

• Home garages needing stacked vehicle storage without moving to an extra-long lift
• Restoration and hobby shops that want parking and light service capability in one 4-post platform
• Owners who want to reposition the lift within a bay periodically — the included caster kit handles that without a forklift
• Techs who want to raise just one end of the vehicle for service work, using the included jack tray instead of a separate floor jack
• Buyers on standard 110V single-phase home-garage power who don't want to run new 220V-240V service just for a storage lift
  

What to Check Before Ordering

• Vehicle weight must remain within the 9,000 lb rating
• Verify overall vehicle length and track width against the runways
• Measure ceiling height with the intended vehicle raised
• Confirm the floor condition and electrical circuit
• Plan for equipment and personnel clearance around the lift during assembly
  

What Makes the AP-9H Different

Portable 4-Post Design

The included caster kit allows the unloaded lift to be repositioned when needed instead of functioning only as a permanently fixed parking structure.

9,000 lb Capacity

The AP-9H supports vehicles up to 9,000 lbs while maintaining a relatively compact 179" overall length compared with the XLT version.

Included Storage and Service Accessories

APlusLift includes a caster kit, jack tray, four drip trays, two removable aluminum approach ramps and an 8 ft power cord with plug.

Safety and Certification

APlusLift lists a secondary slack-cable lock system, CE-certified lift structure and hydraulic system, and an ETL-certified power unit.

Hydraulic System

The AP-9H uses a 110V single-phase 1.5 HP power unit with a dedicated hydraulic return line. APlusLift specifies AW32 or AW46 hydraulic oil depending on operating conditions.