Atlas® PV10PX Symmetric/Asymmetric Heavy-Duty 2 Post Lift #ATEXH-PV10PX-FPD

Atlas® PV10PX — 10,000 lbs 2-Post Lift

Most 10,000 lb 2-post lifts in this price range are built to a consumer or light commercial spec. The Atlas PV10PX is built to the commercial standard that Atlas has been refining for over a decade — 7 1/2" x 14 1/2" columns with 6mm wall thickness, direct-drive cylinders, and commercial-grade arm steel, at a price point that undercuts most premium certified alternatives by a significant margin. Shops that describe their Atlas PV series lifts as 'bullet-proof' aren't being hyperbolic — the design has earned that reputation across thousands of commercial installations.

The PV10PX handles the full range from a Smart Car to a one-ton diesel dually within its 10,000 lb rated capacity. Two column height settings (11' 11" or 12' 3") give install flexibility for different ceiling heights. The included 12-piece truck adapter set (1.25", 2.5", and 5" heights) means the lift is ready for tall trucks out of the box. Atlas backs it with their 2-year structural, 2-year hydraulic, 1-year power unit warranty. Call Alamo at (844) 480-6059 to confirm bay fit and schedule installation.

Who the PV10PX Is Built For

• The commercial service department that needs a heavy-duty 10K overhead 2-post that will run hard every day — the Atlas PV series is described by professionals as 'bullet-proof' and 'built like a brick outhouse' for good reason
• Fleet operators servicing a full range of vehicles from compact cars through one-ton dually pickups, who need one lift that covers every vehicle in the fleet without adapter swaps
• Large residential and pole barn shop owners who want commercial-grade column thickness and cylinder design on a personal shop scale
• Value buyers who recognize the Atlas PV series' commercial pedigree and want that construction quality at the Atlas Equipment price point rather than the Platinum PVL cost
• Shops upgrading from a lower-duty residential lift to a commercial-grade platform and want a PV series model that's been proven in thousands of commercial installations

What the PV10PX Is NOT Built For

• ❌ Shops where ALI/ETL third-party certification is a documented compliance requirement — the PV10PX is commercial-grade but not listed in the ALI Directory
• ❌ Bays with ceilings below 12 feet — the PV10PX requires 12-foot minimum clearance at its low height setting
• ❌ Shops that need faster-than-standard rise time — the PV10PX is a commercial-grade lift, not a quick-cycle platform

Questions about fit or capacity? Call Alamo at (844) 480-6059.

What Makes the PV10PX Different

7 1/2" x 14 1/2" Heavy-Duty Columns — 6mm Steel Wall

The PV10PX's column cross-section is what separates it from consumer-grade 10K lifts. At 7 1/2" x 14 1/2" with 6mm wall thickness, these are commercial-specification columns — the same column geometry Atlas uses on their Platinum PVL series, at the Atlas Equipment price point. Column strength determines how the lift handles off-center loads and multi-year high-cycle use. The carriage and arm steel are also 6mm. For a shop that runs the lift daily, the column spec matters more than any other single metric.

Symmetric and Asymmetric Arm Configuration

The PV10PX is configurable for either symmetric or asymmetric loading at install time, with a minimum arm height of 4 1/2" for low pickup-point vehicles. Drive-thru clearance is 90 1/4" in asymmetric and 96 1/4" in symmetric configuration. The 12-piece truck adapter set (1.25", 2.5", 5" heights) covers taller vehicles including pickup trucks and full-size SUVs. Arm hole and adapter peg size is 1.5" — a standard that works with most commercially available adapter systems.

Adjustable Height — Two Column Positions

The PV10PX installs at either 143 1/8" (11' 11 1/8") or 146 7/8" (12' 2 7/8") overall height — two settings that give install flexibility for bays with slightly different ceiling clearances. A 12-foot minimum ceiling handles both configurations. The adjustable height is set during installation based on the bay's ceiling clearance and the tallest vehicles in the service mix.

Direct-Drive Cylinders — Reduced Moving Parts

The PV10PX uses direct-drive cylinders — the hydraulic cylinder drives the carriage directly rather than through a chain-and-pulley intermediary. That reduces the number of moving parts in the drive system, which translates to fewer wear points and less maintenance across the lift's service life. In a commercial shop running the lift multiple times a day, five days a week, the reduction in chain, pulley, and sheave maintenance is meaningful over a three-to-five year period.

Atlas PV Series — 10+ Years, Thousands Sold, Commercial Track Record

The PV10PX is part of Atlas's PV series — a platform Atlas has manufactured and refined for over a decade with thousands of units in commercial service departments and fleet shops worldwide. The commercial pedigree behind the PV designation is documented in professional shop reviews and long-term user reports. When a shop describes their Atlas PV lift as 'tougher than nails' after years of daily professional use, that's the track record Atlas carries into the PV10PX. Alamo installs and services Atlas Equipment lifts — call (844) 480-6059 to get started.

Full Specifications — PV10PX

Atlas® Warranty — PV10PX

Atlas Equipment backs the PV10PX with their standard warranty covering structural components, hydraulic system, electric power unit, and wear items — verified from atlasautoequipment.com/2-year-structural-2-year-hydraulic-limited-warranty. This warranty applies to all Atlas PV, APEX, BP, and OH series lifts.

Warranty service is through Alamo Equipment & Service. When you buy from us, you are not waiting on a manufacturer hotline — call (844) 480-6059 and we handle it.