Atlas® Platinum PVL-10 10k ALI Cert Adj Ht 2 Post Lift #ATEAP-PVL10-FPD

Atlas® Platinum PVL10 — 10,000 lbs 2-Post Lift

Most shops buying a 10,000 lb 2-post lift face the same question: do you need ALI certification, or don't you? If you're running a general-service shop servicing private customers, you might not need it. But if your customers include fleet accounts, if your lease requires it, if your insurer asks about it, or if you simply want the documented assurance that the lift was independently verified against ANSI/ALI safety standards — that answer changes the product you buy. The Atlas® Platinum PVL10 was built for the shop that needs ALI certification at 10,000 lbs without paying a premium-brand premium to get it.

The PVL10 is an adjustable-height lift: 139 7/8" standard overall height, with a special low-height setup at 135 7/8" using extra cables for bays that are ceiling-constrained. It supports both symmetric and asymmetric installation, uses 3-stage front arms and 2-stage rear arms that reach varied pickup points across the full passenger car to light-truck range, and ships with 4 each of 3" and 6" adapter heights. At $5,448.95, it's the entry point to ALI-certified 10k service on a confirmed Atlas® Platinum platform. If you need the height extension version, the PVL10 EXT adds that at $300 more. If you need more capacity, the PVL12 steps up to 12k and remains ALI certified.

Who the PVL10 Is Built For

• General-service shops servicing cars, compact SUVs, and light trucks under 10,000 lbs that have fleet accounts or insurance requirements that mandate documented ALI certification — the PVL10 gives them the certification without a premium-brand price.
• First-time lift buyers who want ALI certification as a baseline safety assurance and not just a marketing badge — the PVL10's certification is sourced from Atlas® Automotive Equipment's own manufacturer product page.
• Shops with ceiling heights near 12' where the special 135 7/8" low-height cable configuration gives them a few extra inches of breathing room that a fixed-height certified lift can't provide.
• Multi-tech shops adding a second certified bay lift where the primary bay already has a premium-brand certified lift and the second bay needs to match the certification posture at a lower cost.
• Technicians who routinely service both symmetric-positioned vehicles (trucks, vans) and asymmetric-access vehicles (cars where door clearance matters) and want one lift that handles both layouts.

What the PVL10 Is NOT Built For

• ❌ Shops lifting trucks, vans, or SUVs that routinely need more than 81 1/2" lift height — consider the PVL10 EXT for added working room
• ❌ Heavy-duty service needing 12,000 lb+ capacity — step up to the PVL12
• ❌ Shops that need asymmetric arm design specifically — the Challenger CL10AV3 Versymmetric® is the dedicated true-asym alternative

What Makes the PVL10 Different

ALI Certified — Manufacturer-Verified at atlasautoequipment.com

The PVL10's ALI Gold Label certification is sourced from Atlas® Automotive Equipment's manufacturer website, which explicitly lists the Platinum PVL10 as ALI certified. This is the distinction between a certification claim and a certification fact. ALI certification means an independent third party has tested and verified this lift's design and manufacturing against ANSI/ALI ALCTV standards — the same standard that auditors, insurers, and fleet contracts reference. When documentation is required, you have a source to point to.

Adjustable Height — 135 7/8" or 139 7/8" — More Ceiling Flexibility

The PVL10 offers two overall height configurations: the standard 139 7/8" setup, and a special 135 7/8" low-height option installed with extra cables. Those 4 inches matter in bays where the ceiling is close to the minimum clearance — a fixed-height certified lift doesn't give you that option. Confirm your target setup with Alamo before install. The height selection is made at installation; it's not a field adjustment after anchoring.

Symmetric or Asymmetric Installation — One Lift, Both Approaches

The PVL10 supports both symmetric (equal front/rear reach) and asymmetric (offset column for door-open access) installation. The specs differ by layout: 139" overall width asymmetric vs. 137 1/2" symmetric; 107 3/4" inside columns asymmetric vs. 112 1/2" symmetric; 91" drive-thru asymmetric vs. 99 1/2" symmetric. Shops that service a mix of cars and trucks benefit from the flexibility — choose the layout that matches how your technicians approach the majority of vehicles in your bay.

3-Stage Front Arms / 2-Stage Rear Arms — Versatile Pickup Point Reach

The PVL10's 3-stage front arms and 2-stage rear arms extend across a reach range that covers the varied pickup points on modern passenger cars through light trucks. Three-stage front arms give additional extension options for vehicles with inset front pinch welds or wide-stance front lift points. The 4" minimum arm height keeps the lift compatible with low-profile modern vehicles where clearance from the ground to the lift point is limited. Included 3" and 6" adapter heights cover the most common truck and SUV pickup points.

2 HP / 220V Electrical — Standard Shop Circuit, Simple Install

The PVL10 runs on 2 HP at 220V single-phase with a 30A breaker required — a standard commercial shop electrical setup that most bays already have or can easily add. The 1,850 lb shipping weight is lighter than the 12k and 15k Atlas Platinum models, which can simplify receiving logistics. The 4" concrete minimum (lower than the 6" required for heavier Platinum lifts) means many existing shop slabs qualify without a pour upgrade. Alamo verifies your slab, electrical, and bay layout before scheduling the install.

Full Specifications — PVL10

Atlas® Platinum Warranty — PVL10

Atlas® Platinum backs the PVL10 with comprehensive coverage verified from the official Atlas Platinum Warranty PDF. Every component is covered from the day it ships.

Warranty service is through Alamo Equipment & Service. When you buy from us, you are not waiting on a manufacturer hotline — call (844) 480-6059 and we handle it. Wear items (cables, sheaves, latches, controls) carry 90-day coverage per the Atlas Platinum warranty terms.