Atlas LR06 Portable Low-Rise Scissor Lift 6,000 lb #ATEATTD-LR06-FPD
Couldn't load pickup availability
| Model / Part Number | ATEATTD-LR06-FPD |
| Capacity | 6,000 lbs |
| Lift Type | Portable low-rise scissor lift |
| Lifting Configuration | Multi-position manual safety locks, 4" low-profile frame |
| Overall Height | 24" (2') maximum lifting height |
| Minimum Ceiling Height | 7' |
| Overall Width | 70" (5' 10") overall width |
| Drive-Thru Clearance | Portable — repositions within the bay |
| Rise Height | 24" (2') |
| Motor / Electrical | 110V single phase |
| Concrete / Floor Requirement | Portable design — no permanent anchoring required for standard use |
- Portable design — no permanent anchoring required for standard use
- Verify with Alamo before ordering
- 110V single phase
- Have an electrician confirm your circuit before install day
- Plan for 24" (2') maximum lifting height overall lift height
- Measure to lowest obstruction, not peak
Atlas LR06 — 6,000 lbs Portable low-rise scissor lift
Mobile service work and tight-space shops need a lift that goes where the vehicle is, not the other way around. The Atlas LR06 is a 6,000 lb portable low-rise scissor lift with manual safety locks — no compressed air required — built for quick setup wherever the next job is. Call Alamo at (817) 865-3707 for fit and use-case questions.
Who the LR06 Is Built For
- Mobile service and detailing operations that need a portable low-rise lift they can bring to the vehicle instead of the other way around
- Shops with limited or no compressed air access, since the LR06 uses multi-position manual safety locks instead of an air release
- Quick tire, brake, and general maintenance work performed in tight spaces where a full-size lift would not fit or would not be worth installing
- Techs who need to lift a vehicle just enough for undercarriage access without the time or footprint of a full mid-rise or 4-post setup
- Shops running satellite or overflow bays that don't justify a permanent lift installation but still need real lifting capability on demand
What the LR06 Is NOT Built For
- ❌ Fixed-bay shops that would benefit from a permanently installed lift
- ❌ Full-rise underbody work — step up to a 2-post or 4-post lift
Questions about fit or capacity? Call Alamo at (817) 865-3707.
What Makes the LR06 Different
6,000 lbs of Portable Low-Rise Capacity
Rated for 6,000 lbs with a 24" (2') maximum lifting height, the LR06 is built to get a vehicle just high enough for tire, brake, and undercarriage work without the footprint or setup time of a full-size lift.
Multi-Position Manual Safety Locks — No Air Required
Multi-position manual safety locks mean the LR06 doesn't depend on a compressed air line to operate safely, and its 4" low-profile frame lets it slide under a vehicle with minimal ground clearance.
Runs on Standard 110V Power
The LR06 runs on 110V single-phase power, and its portable design needs no permanent anchoring for standard use — no electrician, no concrete work, just position it and go.
Atlas Warranty, Alamo Support
The LR06 carries Atlas's 2-year structural / 1-year hydraulic parts-only warranty. Every claim runs through Alamo directly — call (817) 865-3707 and we take care of it.
Sized to Move With the Job
At 70" (5' 10") of overall width and a low-profile 24" frame, the LR06 is built to reposition within your shop or load into a service vehicle rather than stay fixed in one bay.
- ✅ Mobile service and detailing operations needing a portable low-rise lift
- ✅ Shops with limited compressed air access — the LR06 uses manual safety locks
- ✅ Quick tire, brake, and general maintenance work in tight spaces
- ❌ Fixed-bay shops that would benefit from a permanently installed lift
- ❌ Full-rise underbody work — step up to a 2-post or 4-post lift
LR06 vs. Atlas 6PL (6,000 lb) — Which Lift Is Right for Your Shop?
| Decision Point | LR06 | Atlas 6PL (6,000 lb) |
|---|---|---|
| Capacity | 6,000 lbs | 6,000 lbs |
| Design | Portable, manual multi-position locks | Fixed open-center, air release |
Choose the LR06 for portability — move it between bays with no fixed installation. Choose the 6PL for a fixed-position open-center bay lift with air-operated release. Both stay inside Alamo’s catalog — call (817) 865-3707.
Full Specifications — LR06
| Model / Part Number | ATEATTD-LR06-FPD |
| Capacity | 6,000 lbs |
| Lift Type | Portable low-rise scissor lift |
| Lifting Configuration | Multi-position manual safety locks, 4" low-profile frame |
| Overall Height | 24" (2') maximum lifting height |
| Minimum Ceiling Height | 7' |
| Overall Width | 70" (5' 10") overall width |
| Drive-Thru Clearance | Portable — repositions within the bay |
| Rise Height | 24" (2') |
| Motor / Electrical | 110V single phase |
| Concrete / Floor Requirement | Portable design — no permanent anchoring required for standard use |
| Warranty | 2-year structural / 1-year hydraulic — parts only |
| Overall Pad Length | 53 1/4" (4' 5 1/4") |
| Locking Position Heights | 12 1/4", 18 1/2", 22 1/4" |
| Lowered Height | 4" |
| Shipping Weight | 965 lbs |
⚠️ Installation Requirements
- Ceiling height: Plan for 24" (2') maximum lifting height overall lift height; measure to the lowest obstruction.
- Electrical: 110V single phase; consult an electrician for exact breaker sizing.
- Floor / Concrete: Portable design — no permanent anchoring required for standard use.
- Bay width: Confirm 70" (5' 10") overall width floor width clearance; measure before ordering.
- Surface anchoring: Anchor per manufacturer specification where applicable — do not skip anchoring on production bays.
- Installation: Alamo installs every lift we sell. Call (817) 865-3707 to schedule.
Atlas Warranty — LR06
Atlas backs the LR06 with its published warranty terms for this model — verified from Atlas’s own product documentation (manufacturer-web source). Coverage varies by model in the Atlas standard car lift line; the terms below are specific to the LR06 and should not be assumed to apply to other Atlas models.
| Component | Coverage Term |
|---|---|
| Structural components | 2 years |
| Hydraulic components | 1 year |
| Wear items & accessories | Not covered (consumable, parts-only warranty) |
Warranty service is through Alamo Equipment & Service. When you buy from us, you are not waiting on a manufacturer hotline — call (817) 865-3707 and we handle it.
❓ Frequently Asked Questions — LR06
Is the Atlas LR06 ALI certified?
The LR06 is a commercial-grade portable lift; the live Atlas source does not list ALI certification.
Does the LR06 need compressed air?
No — the LR06 uses multi-position manual safety locks, so no external air supply is required.
How portable is the LR06?
Very — it's a 4" low-profile frame designed for quick repositioning and mobile use, unlike fixed in-ground or bay-mounted lifts.
What locking heights does the LR06 offer?
Three locking positions: 12 1/4", 18 1/2", and 22 1/4", giving flexibility for different service tasks.
Why Buy the LR06 from Alamo Equipment & Service?
- We install it. Every Atlas LR06 we sell can be delivered and set up by our team — we walk your crew through the manual lock positions before we leave.
- We service it. Need support down the road? Call (817) 865-3707 — you reach the team that delivered it, not a manufacturer hotline.
- We size it with you. Not sure if the LR06 (6,000 lbs, 24" maximum lifting height) fits your mobile or tight-space workflow? Call and we will help you plan it.
- Free shipping. The LR06 ships free to all 48 contiguous states.
- Expert comparison help. Trying to decide between the LR06's manual-lock portability and the 6PL's fixed open-center design? Call (817) 865-3707 — we will match the lift to how you actually work.
A shop buying from a pure e-commerce retailer gets a box. A shop buying from Alamo gets a partner.
Equipment ships free — delivered to your business, no freight charges. Parts & accessories ship at standard parcel rates unless the item description says otherwise.
Atlas Warranty Information
- 5-Year Structural Warranty
- 2-Year Hydraulic-Power Warranty