Challenger 10K Short-Rise Scissor Lift Movable PU #SRM10-MPU
| Model | SRM10-MPU |
| Capacity | 10,000 lbs |
| Lift Type | Short-Rise Pad / Scissor Lift |
| Raised Height | 22" |
| Lowered Height | 4.25" |
| Overall Length | 92.875" |
| Overall Width | 87.5" |
| Motor / Electrical | 1 HP, 115V, 60Hz, 1 Phase |
| Power Unit | Mobile / Movable Power Unit Stand |
| ALI / ETL Certified | Yes |
- Minimum 4" reinforced concrete
- Minimum 3,500 PSI
- Cured at least 28 days
- Floor level within 3/8" across installation area
- 115V single phase, 60Hz
- 1 HP motor
- Dedicated 20A circuit specified in SRM10 manual
- Keep cord and hydraulic hoses clear of vehicle traffic
- Allow room beside the lift for the mobile power-unit stand
- Mobile system uses hydraulic quick disconnects
- Disconnect only with lift fully lowered
- Store hoses on the stand when not in use
Challenger SRM10-MPU 10,000 lb Short-Rise Lift
The Challenger SRM10-MPU combines the SRM10's 10,000 lb short-rise lift platform with a movable 115V hydraulic power-unit stand. The lift is designed for brake, tire and quick-service work while allowing the power unit to be repositioned instead of remaining permanently mounted at one location.
The mobile stand uses wheels, a long hydraulic hose and quick-disconnect couplings. Challenger's supplement instructs the operator to fully lower the lift before disconnecting the hydraulic couplings and provides hose storage on the stand when the unit is not in use.
Who the SRM10-MPU Is Built For
- Quick-service bays performing brake and tire work
- Shops that prefer a movable power-unit control station
- Passenger cars, SUVs and light trucks within the 10,000 lb capacity
- Facilities that require an ALI-certified short-rise lift configuration
- 115V service bays that do not need the SRM10-220 power configuration
What to Check Before Ordering
- Confirm vehicle weight stays within the 10,000 lb rating
- Allow clear working space for both the lift and movable power-unit stand
- Verify the dedicated 115V / 20A circuit specified by Challenger
- Confirm concrete meets the current SRM10 installation requirements
What Makes the SRM10-MPU Different
Movable Power Unit
The wheeled power-unit stand allows the power unit and controls to be moved within the working area rather than being fixed to a stationary stand or wall.
Hydraulic Quick Disconnects
The mobile power-unit kit uses male and female hydraulic quick-disconnect couplings. Challenger instructs operators to fully lower the lift before disconnecting them.
Long Hydraulic Hose
The mobile system uses a longer power-unit hydraulic hose so the control unit can be positioned away from the lift while maintaining the hydraulic connection.
ALI / ETL Certified Configuration
The SRM10-MPU is listed as an ALI/ETL certified configuration, unlike the SRM10-220.
10,000 lb Short-Rise Platform
The lift reaches 22" above the floor while providing access for brake, tire and quick-service work on vehicles within its rated capacity.
Full Specifications - SRM10-MPU
| Model | SRM10-MPU |
| Lifting Capacity | 10,000 lbs |
| Raised Height | 22" |
| Lowered Height | 4.25" |
| Lock Heights | 13.75" / 18.25" / 21.25" |
| Low Adapter Position | 4.75" |
| High Adapter Position | 6.75" |
| Overall Width | 87.5" |
| Outside Width of Platforms | 72" |
| Width Between Platforms | 23" |
| Platform Length | 50" |
| Ramp + Platform Length | 82.5" |
| Overall Length | 92.875" |
| Rearward Movement | 13.25" |
| Motor | 1 HP |
| Electrical | 115V, 60Hz, 1 Phase |
| Required Circuit | Dedicated 20A Circuit / Time-Delay Fuse |
| Power Unit Configuration | Movable Wheeled Stand |
| Hydraulic Connection | Quick-Disconnect Couplings |
| Hydraulic Fluid | 6 quarts 10W anti-foam / anti-rust hydraulic oil or Dexron III ATF |
| Indoor Use | Yes - outdoor installation prohibited |
| ALI / ETL Certified | Yes |
| Color | Black |
⚠️ Installation Requirements
- Concrete: Minimum 4" steel-reinforced 3,500 PSI concrete cured at least 28 days.
- Electrical: Dedicated 115V, single-phase, 60Hz circuit with a 20A breaker or time-delay fuse.
- Mobile power unit: Leave enough floor space to position and move the stand safely.
- Hydraulic quick disconnects: Fully lower the lift before disconnecting the couplings.
- Hose routing: Keep hydraulic hoses clear of vehicle tires and traffic paths.
- Installation: Installation available via quote. Call (817) 865-3707.
Challenger Warranty - SRM10-MPU
Current Challenger warranty documentation for the SRM10 series provides the following coverage to the original owner, subject to Challenger's current terms and registration requirements.
| Coverage | Term |
|---|---|
| Structural Parts | 1 Year |
| Functional Parts | 1 Year |
| Labor | 1 Year |
| Wear Items / Accessories | 90 Days |
Warranty registration should be completed after installation. Current Challenger terms and exclusions apply.
❓ Frequently Asked Questions - SRM10-MPU
Is the SRM10-MPU ALI certified?
Yes. Current SRM10 configuration information lists the SRM10-MPU as an ALI/ETL certified version.
What does MPU mean?
MPU refers to the movable power-unit configuration. The hydraulic power unit is mounted to a wheeled stand and connects to the lift with a long hydraulic hose and quick-disconnect couplings.
Can I disconnect the mobile power unit while the lift is raised?
No. Challenger instructs users to fully lower the lift before disconnecting the hydraulic quick-disconnect couplings.
What electrical service does the SRM10-MPU require?
The SRM10-MPU uses the 115V, 60Hz, single-phase SRM10 power configuration. Challenger specifies a dedicated 20A circuit or time-delay fuse.
Why Buy the SRM10-MPU from Alamo Equipment & Service?
- Installation available. Call for an installation quote and bay review.
- We help plan the movable power-unit layout. Hose routing and control-unit placement matter in an active service bay.
- We verify certification. The MPU version provides an ALI/ETL certified SRM10 configuration.
- Service support. Call Alamo for equipment, parts and service assistance after the sale.
Call (817) 865-3707.
Shipping follows the method shown on the product page and at checkout. Standard parcel, calculated LTL, freight quotes, included freight, and pickup may apply by item.