Challenger 14K Alignment Scissor Lift Flush Mount #SX14-FLUSH

Challenger 14K Alignment Scissor Lift Flush Mount #SX14-FLUSH

A surface-mount alignment lift in a bay with a rolling-jack workflow means ramps, trip edges, and a floor that never stays clean. The SX14-FLUSH is the flush-mount answer: a 14,000 lb single-scissor alignment lift that sits at floor level, delivering full alignment capability with a clean floor when the lift is down.

With 25.5 in. wide runways, a 183 in. maximum wheelbase, locking alignment turnplates, and a package that includes two rolling jacks, turn plates, and an airline kit for dual jack operation, it is a complete alignment bay in one flush-mounted platform.

Who the SX14-FLUSH Is Built For

• Alignment shops that want a clean floor — flush mount means no ramps, no trip edges, and full use of the bay when the lift is down.
• Service centers handling various vehicle types within the 14,000 lbs rating and 183 in. maximum wheelbase.
• Shops servicing dual rear wheel vehicles — the extra-wide 25.5 in. runways are built for them.
• Buyers who want the complete package: two rolling jacks, adjustable turn plates, and the airline kit for dual jack operation are included.
• Teams comparing flush-mount against a 4-post alignment rack like the AR44018AR.

What the SX14-FLUSH Is NOT Built For

This is not the right choice when your vehicle weights exceed 14,000 lbs, your wheelbase exceeds 183 in., or your floor cannot take a recessed flush-mount pit. If you are close on any spec, compare it with Challenger 18K 4-Post Alignment Rack Package #AR44018AR or call Alamo.

Important sizing note: The SX14-FLUSH publishes 14,000 lbs capacity, 183 in. maximum wheelbase, and a 14' x 28' minimum recommended bay. Measure the bay and confirm the exact vehicle mix before purchase.

What Makes the SX14-FLUSH Different

Flush-Mount, Clean-Floor Operation

Flush mount puts the lift at floor level: vehicles roll across a flat floor, techs walk a flat floor, and the bay stays usable when the lift is down. That matters for alignment bays doubling as general service space — and it is the whole reason to choose flush over surface mount.

• Confirm your floor can take the recessed pit before ordering.
• Check drainage and concrete condition around the pit zone.
• Ask Alamo to compare the surface-mount workflow if a pit is a problem.
• Keep the install team involved before the bay is committed.

Alignment Package Included

The kit includes two rolling jacks, adjustable turn plates, and an airline kit for dual jack operation — the hardware that turns a lift into an alignment bay is in the box, not on an accessories list. Locking alignment turnplates hold settings through repeated cycles.

Extra-Wide Runways

The 25.5" runways accommodate single and dual rear wheel vehicles, with 40" between runways and a 183" maximum wheelbase — the geometry that matters when a dually pickup is the alignment customer.

Precision and Safety Features

A photo cell ensures runway synchronization, twin hydraulic cylinders provide smooth operation, and the automatic light feature illuminates the underside of the vehicle and turns off below 18". Maintenance-reduced rear slip plates use oversized, encapsulated bearings against debris.

Power and Air Coordination

The published requirements are a 3HP motor on 208-240v, 1 Phase (23 FLA) and 90 - 120 psi filtered/lubricated air at 20 CFM. Have a licensed electrician confirm the circuit and confirm the air supply before installation day.

Service After the Sale

Alamo installs and services the lifts we sell, so the same team that helps size the SX14-FLUSH can support the lift after it is in the bay.

Best For

• Alignment shops wanting flush-mount, clean-floor operation
• Mixed fleets within 14,000 lbs and a 183 in. wheelbase
• Shops servicing dual rear wheel vehicles
• Buyers who want the rolling jacks and turn plates included

Not Ideal For

• Floors that cannot take a recessed flush-mount pit
• Wheelbases beyond the 183 in. maximum
• Vehicles above the rated capacity
• Shops without 90 - 120 psi (20 CFM) shop air

SX14-FLUSH vs. AR44018AR - Which Alignment Lift Is Right for Your Shop?

Both paths stay inside Alamo's catalog. Call Alamo and we will help you decide before ordering.

Full Specifications - SX14-FLUSH

Challenger Lifts Warranty - SX14-FLUSH

Challenger Lifts backs the SX14 with manufacturer warranty coverage. Alamo helps route service and support after the sale so the shop is not left chasing a distant parts desk.

Warranty service is coordinated through Alamo Equipment & Service — call (817) 865-3707 and we help get the issue moving.

Warranty terms can change. Confirm exact coverage at the time of purchase. Warranty can be void if the lift is installed improperly or not anchored per spec.