Challenger 18K 4-Post General Service Lift #44018E
| Lifting Capacity | 18,000 lbs |
| Lift Style | 4-Post General Service |
| Runway Width | 22" |
| Rise Height | 78.75" |
| Overall Length (extended) | 292" |
| Overall Width | 138.125" |
| Max Wheelbase | 230" |
| Lock Release | Single-Point, Mechanical |
| Motor / Voltage | 3HP, 208-230v, 1 Phase |
| Speed of Rise | 60 s |
| Colors Available | Black |
- Minimum 4" rebar-reinforced concrete (3,000 psi) per Challenger IOM
- Check seams, slope, cracks, and anchor zones
- Confirm requirements before installation day
- 3HP, 208-230v, 1 Phase power unit
- 30A service
- Have an electrician confirm final service
- 102.5" overall height plus the raised vehicle
- Confirm overhead doors and lights clear the lifted vehicle
- Confirm aisle and approach room for the 292" footprint
Challenger 18K 4-Post General Service Lift #44018E
A long-wheelbase truck or van on a short 4-post runway is balanced on a knife edge — axles hanging past the runway ends, or the whole vehicle spotted crooked because the wheelbase simply does not fit. The 44018E exists for that truck: an 18,000 lb four-post general service lift with the extended-length runways (292 in. overall) that long-wheelbase vehicles actually need.
It carries 22 in. wide runways with a 36" - 54" adjustable width between them, single-point mechanical lock release, and a 230 in. maximum wheelbase — a natural fit for long trucks and vans in a general service bay that does 4-post work every day.
Who the 44018E Is Built For
- Shops servicing long-wheelbase trucks and vans within the 18,000 lbs rating and the 230 in. maximum wheelbase.
- Service bays that fit the extended 292 in. x 138.125 in. footprint with approach room to spare.
- General service shops that want runway adjustability — 36" to 54" between the 22 in. runways covers mixed tread widths.
- Buyers who want a 4-post platform for service work, not just parking — the built-in runway rail system takes rolling jacks and oil drain pans (sold separately).
- Teams comparing the general-service configuration against the AR44018AR alignment rack package.
What the 44018E Is NOT Built For
This is not the right choice when your vehicle weights exceed 18,000 lbs, your wheelbase exceeds 230 in., or your bay cannot absorb the extended 292 in. footprint. If you are close on any spec, compare it with Challenger 18K 4-Post Alignment Rack Package #AR44018AR or call Alamo.
Important sizing note: The 44018E publishes 18,000 lbs capacity, 292 in. overall extended length, and 138.125 in. overall width. Measure the bay and confirm the exact vehicle mix before purchase.
What Makes the 44018E Different
Extended-Length Runways
At 292 in. overall length with a 230 in. maximum wheelbase, the 44018E is the long-wheelbase configuration of the 44018 series — transit vans, box trucks, and crew-cab work trucks sit fully supported instead of hanging past the runway ends. The standard 44018 stops at a 194 in. wheelbase.
- Measure your longest vehicle's wheelbase, not its overall length, before ordering.
- Confirm the 292 in. footprint leaves working room around the lift.
- Ask Alamo to compare the standard 44018 length if your bay is the constraint.
- Keep the install team involved before the bay is committed.
Adjustable Runway Width
The 22 in. runways adjust from 36" to 54" between them, so mixed tread widths — vans to dual-wheel trucks — spot correctly without a second lift.
Runway Rail System
The built-in runway rail system accepts convenience options like rolling jacks and oil drain pans (sold separately), turning a parking platform into a working service lift when the job needs it.
Capacity and Vehicle Mix
The 18,000 lbs rating is the hard ceiling for the lift, not a target to exceed. If you regularly service loaded medium-duty trucks at or near the rating, call Alamo before ordering so we can confirm the safer match.
Electrical and Install Coordination
The published electrical line is 3HP, 208-230v, 1 Phase on a 30A service. Have a licensed electrician confirm the circuit and final local requirements before installation day.
Service After the Sale
Alamo installs and services the lifts we sell, so the same team that helps size the 44018E can support the equipment after it is in the bay.
Best For
- Long-wheelbase trucks and vans within 18,000 lbs
- Bays that fit the 292" x 138.125" extended footprint
- Shops wanting runway adjustability across mixed fleets
- Buyers who want Alamo installation and service support
Not Ideal For
- Wheelbases beyond the 230 in. maximum
- Vehicles above the rated capacity
- Bays too short for the extended footprint
- Shops needing alignment capability instead of general service
44018E vs. AR44018AR - Which 4-Post Is Right for Your Shop?
| Feature | 44018E | AR44018AR |
|---|---|---|
| Capacity | 18,000 lbs | 18,000 lbs |
| Overall length | 292" | 311.5" |
| Max wheelbase | 230" | 236" |
| Rise height | 78.75" | 83.375" |
| Alignment capability | General service only | 4-wheel alignment package (turn plates + slip plates) |
| Best use case | Long-wheelbase trucks and vans in a general service bay. | Shops adding or upgrading alignment work on trucks and vans. |
Both configurations stay inside Alamo's catalog. Call Alamo and we will help you decide before ordering.
Full Specifications - 44018E
| Lifting Capacity | 18,000 lbs |
| Lift Style | 4-Post General Service |
| Runway Width | 22" |
| Width Between Runways | 36" - 54" |
| Rise Height | 78.75" |
| Max Wheelbase | 230" |
| Overall Length (extended) | 292" |
| Overall Width | 138.125" |
| Inside Columns | 121" |
| Between Columns | 240" |
| Height Overall | 102.5" |
| Height of Runways | 7.25" |
| Lock Release | Single-Point, Mechanical |
| Motor / Voltage | 3HP, 208-230v, 1 Phase |
| Amps | 30 |
| Speed of Rise | 60 s |
| Colors Available | Black |
| Approach Ramps | Diamond-plate with steel roller wheels |
| Runway Rail System | Rolling jacks and oil drain pans compatible (sold separately) |
| Manufacturer | Challenger Lifts |
⚠️ Installation Requirements
- Floor: Minimum 4" rebar-reinforced concrete (3,000 psi) per the Challenger installation manual; verify slab condition before delivery.
- Electrical: 3HP, 208-230v, 1 Phase, 30A service; confirm breaker and drop location with an electrician.
- Clearance: Confirm the 102.5" overall height plus the raised vehicle clears doors and lights, and the 292" x 138.125" footprint leaves working room.
- Runways: Set runway width (36" - 54") for the vehicle mix before the first vehicle is spotted.
- Installation: Alamo installs every lift we sell. Call (817) 865-3707 to schedule.
Challenger Lifts Warranty - 44018E
Challenger Lifts backs the 44018 series with manufacturer warranty coverage. Challenger's published warranty schedule does not list a model-specific row for the 44018/44018E, so Alamo confirms the exact current terms in writing at purchase rather than quoting an unverified number here.
| Component | Coverage Term |
|---|---|
| Manufacturer warranty | Backed by Challenger Lifts; exact terms confirmed at purchase |
| Registration | Valid only if registered with Challenger (challengerlifts.com) |
Warranty service is coordinated through Alamo Equipment & Service — call (817) 865-3707 and we help get the issue moving.
Warranty terms can change. Confirm exact coverage at the time of purchase. Warranty can be void if the lift is installed improperly or not anchored per spec.
❓ Frequently Asked Questions - 44018E
What is the difference between the 44018E and the AR44018AR?
The 44018E is the extended-length general service configuration (292" overall, 230" max wheelbase). The AR44018AR is the alignment rack package (311.5" overall, 236" max wheelbase) with built-in turn plates and rear slip plates for 4-wheel alignment work.
Will the 44018E fit my bay?
Measure the 292" x 138.125" footprint with working room around it, the 102.5" overall height plus your raised vehicle against the lowest obstruction, and your longest wheelbase against the 230" maximum. Alamo can verify the measurements with you before you order.
Can I add rolling jacks to the 44018E later?
Yes — the built-in runway rail system accepts rolling jacks and oil drain pans (sold separately). Note that rolling jack application requires fixed runways and runway spacing of 33-15/16" to 41-11/16" per Challenger.
Why Buy the 44018E from Alamo Equipment & Service?
- We install it. Alamo anchors, wires, and sets up the 44018E — a long 4-post needs an installer who verifies the slab before the truck arrives.
- We service it. If the lift needs attention after install, call the same equipment team.
- We size it with you. The 292 in. extended footprint and 230 in. wheelbase make bay measurement critical — we walk through it before you order.
- Freight handled. Alamo coordinates freight delivery so you are not chasing carriers.
- Expert comparison help. If the AR44018AR alignment package or the standard-length 44018 is a better fit, Alamo will tell you before you buy.
A shop buying from a pure e-commerce retailer gets a box. A shop buying from Alamo gets a partner. Call (817) 865-3707 or email our team.
Free freight, lower 48 states. Delivered to a commercial address. The receiver unloads and should bring a forklift or loader. We'll call to confirm delivery details before your lift ships. Liftgate, inside, residential and appointment delivery are not included; we'll quote them on the call if you need them. See our shipping policy.