Challenger 18K ALI-Certified 4-Post Lift Package #4018XFX-PKG
Regular price
$39,664.73
Regular price
-36%
$61,976.16
Sale price
$39,664.73
ALI® Certified
This Challenger lift is independently tested to ANSI/ALI ALCTV safety standards. Verify at autolift.org
Manuals & Resources
Need installation help? Call Alamo at (817) 865-3707 - we install, service, and inspect every lift we sell.
Quick Specs - Challenger 4018XFX-PKG
| Lifting Capacity | 18,000 lbs |
| Max Wheelbase | 220 in |
| Rise Height | 72 in |
| Runway Width | 24 in |
| Motor | 208-230V, 1-phase, 20 A |
| Includes | 2 rolling jacks, airline kit, 2 wheel stops, work step |
Questions about fit or electrical service? Call (817) 865-3707 and Alamo will check your building against this lift before you order.
Will the 4018XFX-PKG Fit Your Bay?
Floor space and overhead clearance, not weight rating, are usually the limiting factor here. Challenger's own footprint for this model is 303.375" x 152.125", with 98.625" overall height -- confirm both against your bay before you order.
RISE HEIGHT
72"
clear working height under the deck
OVERALL LENGTH
303.375"
front to back footprint
OVERALL WIDTH
152.125"
post to post across the bay
Send us your bay dimensions and we will confirm the fit. Call (817) 865-3707 before you commit to a configuration.
Site Prep - What Your Bay Needs Before Install Day
The prep list for a lift this size is short but non-negotiable. If any one of them is uncertain, call us first.
Concrete
A four-post lift this size puts real load into the slab. Concrete thickness, strength, and cure age all have to meet Challenger's published installation requirements for the 4018XFX-PKG. If you are unsure what is under your floor, we can help you find out.
Electrical
Challenger specifies 208-230V single phase, 60 Hz (20 A) as the standard power unit on the 4018XFX-PKG. Confirm your panel and circuit against this before install day.
Anchoring
Four-post anchor bolting per Challenger's installation manual -- plan for a rotary hammer drill and the layout drawing in the manual.
Alamo does not just ship this lift and leave. We size it to your building, coordinate the freight, install it, and come back for inspections.
(817) 865-3707
Talk to Alamo's install team
Challenger 4018XFX-PKG
Ordering a lift and then chasing down rolling jacks, an airline kit, and wheel stops on a second and third PO wastes time you don't have. The Challenger 4018XFX-PKG is Alamo's answer: the 18,000 lb capacity, ALI Certified 4018XFX bundled with a complete rolling-jack accessory package from the start. The Challenger 4018XFX-PKG is the 18,000 lb capacity, ALI® Certified 4018XFX lift bundled with a complete rolling-jack accessory package: 2 rolling jacks, 1 airline kit, 2 fold-down wheel stops, and 1 work step. Same 220 in max wheelbase and 24 in wide runways as the base 4018XFX, ready to service larger commercial vehicles out of the box.
ALI Certification means this lift is built and tested to the strictest safety standards in the industry. An alignment rack upgrade is not available for this model.
Who the 4018XFX-PKG Is Built For
- Shops that know they'll want rolling jacks on day one — this package bundles 2 rolling jacks, 1 airline kit, 2 fold-down wheel stops, and 1 work step with the base 4018XFX -- one PO instead of ordering accessories separately later.
- Shops that need ALI certification on record — same certified 4018XFX platform underneath the package, independently tested for insurance and fleet-contract compliance.
- Shops running vehicles up to a 220" wheelbase — identical capacity and footprint to the standalone 4018XFX -- the package changes what's in the box, not the lift itself.
- Buyers who want the under-vehicle work done without a floor jack fight — the included rolling jacks and work step are sized for exactly this lift's runway spacing.
- Buyers who want one team for sizing, delivery, install, and service — Alamo measures your bay, installs the lift, and stays the point of contact for warranty and service afterward.
What the 4018XFX-PKG Is NOT Built For
- You already own compatible rolling jacks and an airline kit -- buy the base 4018XFX and save on the package.
- You need front turntable cutouts for wheel alignment -- this deck configuration doesn't offer that upgrade.
- Your heaviest vehicle exceeds 220" wheelbase -- step up to a 30,000 lb 4-post deck.
- You don't need ALI certification and want to save on the base 44018 instead.
- Your bay is smaller than the 303.375" x 152.125" footprint -- the runway spacing doesn't compress.
What Sets the 4018XFX-PKG Apart
- 18,000 lb lifting capacity, ALI® Certified
- 220 in max wheelbase
- 24 in wide runways
- Includes 2 rolling jacks
- Includes 1 airline kit
- Includes 2 fold-down wheel stops
- Includes 1 work step
- Proven cable-drive design
- Single-point mechanical lock release
Compare 4018XFX Configurations
| Model | What's Included |
| 4018XFX | Base lift with built-in runway rail system for rolling jacks/airline kit (sold separately) |
| 4018XFX-PKG | Adds 2 rolling jacks, 1 airline kit, 2 fold-down wheel stops, and 1 work step |
Both share the same 18,000 lb capacity, 220 in max wheelbase, and 24 in wide runways.
Full Specifications - 4018XFX-PKG
| Model | 4018XFX-PKG |
| Lifting Capacity | 18,000 lbs |
| Configuration | 4-Post General Service, drive-on, ALI Certified, rolling-jack package |
| Max Wheelbase | 220 in |
| Rise Height | 72 in |
| Overall Length | 303.375 in |
| Overall Width | 152.125 in |
| Inside Columns | 128.8125 in |
| Between Columns | 229.125 in |
| Overall Height | 98.625 in |
| Height of Runways | 9.5 in |
| Width of Runways | 24 in |
| Width Between Runways | 40 in |
| Lock Release | Single-point mechanical lock release |
| Motor / Voltage | 208-230V, single phase, 60 Hz |
| Amperage | 20 A |
| Rise Time | 70 s |
| ALI® Certified | Yes |
| Package Includes | 2 rolling jacks, 1 airline kit, 2 fold-down wheel stops, 1 work step |
| Alignment Rack Upgrade | Not available for this model |
Installation Requirements
- Concrete must meet Challenger's published thickness, strength, and cure requirements for this model.
- Electrical service sized to 208-230V single-phase, 60 Hz (20 A), run by a licensed electrician.
- Four-post anchor bolting per Challenger's installation manual -- this lift is not free-standing.
- Installation performed by qualified technicians and commissioned to manufacturer procedure.
- Alamo coordinates freight, rigging, installation, startup, and the rolling-jack accessory package as part of the purchase.
Challenger Lifts Warranty
Challenger Lifts backs the 4018XFX-PKG with the following manufacturer coverage to the original owner. Alamo routes service and support after the sale.
| Component | Coverage Term |
| Structural parts | 5 Years |
| Functional parts | 2 Years |
| Labor | 1 Year |
Warranty is to the original owner. Coverage excludes normal wear, improper installation, and unapproved parts. Warranty service is through Alamo Equipment & Service - call (817) 865-3707.
Frequently Asked Questions - 4018XFX-PKG
Why Buy the 4018XFX-PKG from Alamo Equipment & Service?
- We install it. Alamo anchors, wires, and sets up the 4018XFX-PKG, plus mounts the rolling jack airline kit, so you're not coordinating contractors.
- We service it. After install, call the same equipment team at (817) 865-3707 for support.
- We size it with you. At 18,000 lbs, ALI Certified, and a 220" maximum wheelbase, we confirm it against your bay and vehicle mix before you order.
- Freight handled. This lift and its accessory package ship freight; Alamo coordinates delivery to your bay.
- Expert comparison help. If the bundled rolling jacks aren't the right fit for your shop, we'll help you configure the base 4018XFX instead.
A shop buying from a pure e-commerce retailer gets a box. A shop buying from Alamo gets a partner.
Shipping follows the method shown on the product page and at checkout. Standard parcel, calculated LTL, freight quotes, included freight, and pickup may apply by item.