Challenger 30K Heavy-Duty 4-Post General Service Lift #4030SFX
Regular price
$32,738.90
Regular price
-36%
$51,154.53
Sale price
$32,738.90
ALI® Certified
Challenger heavy-duty four-post lifts are independently tested to ANSI/ALI ALCTV safety standards. Verify at autolift.org
Manuals & Resources
Need installation help? Call Alamo at (817) 865-3707 - we install, service, and inspect every lift we sell.
Quick Specs - Challenger 4030SFX
| Lifting Capacity | 30,000 lbs. |
| Max. Wheelbase | 244.5" |
| Rise Height | 71.75" |
| Overall Length | 308" |
| Overall Width | 172.75" |
| Runway Width | 24" |
| Motor / Voltage | 3HP, 208v - 230v (single phase standard) |
| Min. Recommended Bay Size | 28' x 17' |
| ALI® / ETL Certified | Yes |
| Shipping | Ships freight - Alamo coordinates delivery |
Questions about bay size or electrical service? Call (817) 865-3707 and Alamo will check your building against this lift before you order.
Will the 4030SFX Fit Your Bay?
Bay geometry decides this purchase more often than capacity does. Challenger's minimum recommended bay size for this model is 28' x 17'. That is the recommendation, not a hard floor - Alamo will review your actual layout.
RISE HEIGHT
71.75"
clear working height under the deck
OVERALL LENGTH
308"
front to back footprint
OVERALL WIDTH
172.75"
post to post across the bay
Send us your bay dimensions and we will confirm the fit. Call (817) 865-3707 before you commit to a configuration.
Site Prep - What Your Bay Needs Before Install Day
Get these confirmed before the truck shows up with your lift. If any one of them is uncertain, call us first.
Concrete
A lift at 30,000 lbs puts real load into the slab. Concrete thickness, strength, and cure age all have to meet Challenger's published installation requirements. If you are unsure what is under your floor, we can help you find out.
Electrical
Challenger publishes a 3HP, 208v - 230v (single phase standard) motor as standard on the 4030 series, with a 90 - 120 psi air supply required for the lock release. Confirm both against your building before install day.
Air Supply
Air-actuated lock release means shop air has to reach the lift. Plan the drop as part of the install, not as an afterthought.
Alamo does not just ship this lift and leave. We size it to your building, coordinate the freight, install it, and come back for inspections.
(817) 865-3707
Talk to Alamo's install team
Challenger 4030SFX 30,000 lb Heavy-Duty 4-Post Lift
A drive-on four-post that tops out below 30,000 lb turns away exactly the trucks a shop needs to service. The 4030SFX is rated for 30,000 lb, full stop.
It's cable-driven, rated at 30,000 lb, with a 244.5" maximum wheelbase and 308" of overall length. Challenger's recommended minimum bay size for this configuration is 28' x 17'. Power is 3HP, 208v - 230v (single phase standard).
Who the 4030SFX Is Built For
- Shops running vehicles near a lighter lift's limit — 30,000 lb of rated capacity covers loads a standard-duty four-post can't take safely.
- General-service bays doing brakes, PM, and inspections on heavy trucks — a clear drive-on deck without alignment hardware keeps the runway simple for routine work.
- Fleets running long-wheelbase trucks and trailers — 244.5" of wheelbase capacity means the vehicle doesn't overhang the runway ends.
- Buildings that can actually fit the footprint — plan for Challenger's recommended 28' x 17' minimum bay before you order, not just the lift's own dimensions.
- Buyers who want one team for sizing, delivery, install, and service — Alamo measures your bay, installs the lift, and stays the point of contact for warranty and service afterward.
What the 4030SFX Is NOT Built For
- Your heaviest loaded vehicle exceeds 30,000 lbs - capacity is not a number to round down.
- You regularly service vehicles longer than a 244.5" wheelbase - step up to the next deck length.
- You need alignment capability - this is the general-service deck, not the alignment deck.
- Your bay is smaller than 28' x 17' - the footprint does not compress.
- You are looking for a two-post - a four-post is a different tool for a different job.
What Sets the 4030SFX Apart
Configuration Highlights
- Cable-driven lift system - heavy-duty steel sheaves and cables, a design Challenger has run in the field for years.
- Single-point air-actuated lock release - all four column locks disengage together from one control.
- Six position level locking - set working height where the job needs it, not where the lift wants it.
- Anti-sway device - keeps the runways stable under off-center and heavy loads.
- Fold-down approach ramps with jack rails - drive-on access plus rolling jack compatibility.
- General service deck - flat runways for inspection, brake, driveline, and undercar work.
Where It Excels
Sustained heavy-duty service on trucks up to a 244.5" wheelbase, with the deck configuration matched to general service work.
Plan Around This
Capacity, wheelbase, and building footprint have to be checked together. A lift can clear one and fail another, which is why Alamo reviews all three before quoting.
Full Specifications - 4030SFX
| Lifting Capacity | 30,000 lbs. |
| Lift Type | Cable-driven, four-post |
| Deck Configuration | General service |
| Max. Wheelbase | 244.5" |
| Rise Height | 71.75" |
| Overall Length | 308" |
| Overall Width | 172.75" |
| Inside Columns | 152" |
| Between Columns | 246.125" |
| Height of Columns | 92.25" |
| Height of Runways | 8.5" |
| Width of Runways | 24" |
| Width Between Runways | 46" - 52" |
| Air Supply Required | 90 - 120 psi |
| Motor / Voltage | 3HP, 208v - 230v (single phase standard) |
| Lock System | Six position level locking with pneumatic single-point safety release |
| Min. Recommended Bay Size | 28' x 17' |
| Colors Available | Black |
| ALI® / ETL Certified | Yes |
Installation Requirements
- Concrete must meet Challenger's published thickness, strength, and cure requirements for this model.
- Electrical service sized to the motor specification above, run by a licensed electrician.
- Shop air plumbed to the lift for the pneumatic lock release.
- Installation performed by qualified technicians and commissioned to manufacturer procedure.
- Alamo coordinates freight, rigging, installation, and startup as part of the purchase.
Challenger Lifts Warranty
Challenger Lifts backs the 4030SFX with the following manufacturer coverage to the original owner. Alamo routes service and support after the sale.
| Component | Coverage Term |
| Structural parts | 5 Years |
| Functional parts | 2 Years |
| Labor | 1 Year |
Warranty is to the original owner. Coverage excludes normal wear, improper installation, and unapproved parts. Warranty service is through Alamo Equipment & Service - call (817) 865-3707.
Frequently Asked Questions - 4030SFX
Why Buy the 4030SFX from Alamo Equipment & Service?
- We install it. Alamo anchors, wires, and sets up the 4030SFX so you're not coordinating contractors.
- We service it. After install, call the same equipment team at (817) 865-3707.
- We size it with you. At 30,000 lb and a 244.5" maximum wheelbase, we confirm it against your bay and vehicle mix before you order.
- Freight handled. This lift ships freight; Alamo coordinates delivery to your bay.
- Expert comparison help. We'll help you pick the right configuration for your shop if the 4030SFX isn't the exact fit.
A shop buying from a pure e-commerce retailer gets a box. A shop buying from Alamo gets a partner.
Shipping follows the method shown on the product page and at checkout. Standard parcel, calculated LTL, freight quotes, included freight, and pickup may apply by item.