Challenger 30K Heavy-Duty 4-Post Alignment Lift #44030XAR
Regular price
$42,891.43
Regular price
-36%
$67,017.87
Sale price
$42,891.43
ALI® Certified
Challenger heavy-duty four-post lifts are independently tested to ANSI/ALI ALCTV safety standards. Verify at autolift.org
Manuals & Resources
Need installation help? Call Alamo at (817) 865-3707 - we install, service, and inspect every lift we sell.
Quick Specs - Challenger 44030XAR
| Lifting Capacity | 30,000 lbs. |
| Runway Width | 24" |
| Max Wheelbase | 350" |
| Max. Two-Wheel Alignment | 326" |
| Lock Positions | 6, with single-point air lock release |
| Overall Width | 149.5" |
| ALI® Certified | Yes |
| Shipping | Ships freight - Alamo coordinates delivery |
Questions about bay size or electrical service? Call (817) 865-3707 and Alamo will check your building against this lift before you order.
Will the 44030XAR Fit Your Bay?
The numbers that matter most are the ones describing your slab. Overall width is 149.5 in. Leave walk-around and approach clearance beyond the lift itself.
OVERALL WIDTH
149.5"
across the bay
RUNWAY WIDTH
24"
drive-on width
RUNWAY WIDTH
24"
drive-on width
Send us your bay dimensions and we will confirm the fit. Call (817) 865-3707 before you commit to a configuration.
Site Prep - What Your Bay Needs Before Install Day
Three things determine whether install day goes smoothly. If any one of them is uncertain, call us first.
Concrete
A lift at 30,000 lbs puts real load into the slab. Concrete thickness, strength, and cure age all have to meet Challenger's published installation requirements. If you are unsure what is under your floor, we can help you find out.
Electrical
Electrical and air requirements for this configuration should be confirmed against the Challenger installation manual for your serial range. Alamo will pull the exact figures for your order before anything is scheduled.
Air Supply
Air-actuated lock release means shop air has to reach the lift. Plan the drop as part of the install, not as an afterthought.
Alamo does not just ship this lift and leave. We size it to your building, coordinate the freight, install it, and come back for inspections.
(817) 865-3707
Talk to Alamo's install team
Challenger 44030XAR 30,000 lb Heavy-Duty 4-Post Lift
Turning away heavy-truck alignment work because the shop's lift can't take a turnplate is real money left on the table. The 44030XAR is built to take that job.
It's rated at 30,000 lb with a 350" maximum wheelbase. This configuration adds front turntable cutouts and fold-down approach ramps with jack rails. Two-wheel alignment range is 326".
Who the 44030XAR Is Built For
- Shops running vehicles near a lighter lift's limit — 30,000 lb of rated capacity covers loads a standard-duty four-post can't take safely.
- Shops that turn away or sublet heavy-truck alignment work — the turntable cutouts and alignment range on this deck are built specifically for that job, not bolted on after.
- Fleets running long-wheelbase trucks and trailers — 350" of wheelbase capacity means the vehicle doesn't overhang the runway ends.
- Buildings that can fit this lift's full footprint — measure the bay before you order, including approach and walk-around clearance on both sides.
- Buyers who want one team for sizing, delivery, install, and service — Alamo measures your bay, installs the lift, and stays the point of contact for warranty and service afterward.
What the 44030XAR Is NOT Built For
- Your heaviest loaded vehicle exceeds 30,000 lbs - capacity is not a number to round down.
- Your bay cannot clear a 149.5 in. overall width plus working room on both sides.
- You are servicing passenger cars only - the capacity and footprint would go unused.
- You are looking for a two-post - a four-post is a different tool for a different job.
What Sets the 44030XAR Apart
Configuration Highlights
- Six position locks with single-point air lock release - one control drops the locks across the lift.
- 24 in. wide runways - drive-on width sized for heavy-duty service work.
- Adjustable runways - runway spacing can be set to the vehicles you actually service.
- Anti-sway device - added lateral stability under load.
- Fold-down approach ramps with jack rails - drive-on access with rolling jack support.
- Front turntable cutouts - the deck is prepared for alignment turnplates.
Where It Excels
Heavy-duty undercar work on 24 in. runways with six position air locks for setting working height.
Plan Around This
Capacity, wheelbase, and building footprint have to be checked together. A lift can clear one and fail another, which is why Alamo reviews all three before quoting.
Full Specifications - 44030XAR
| Lifting Capacity | 30,000 lbs. |
| Lift Type | Four-post |
| Runway Width | 24" |
| Max Wheelbase | 350" |
| Max. Two-Wheel Alignment | 326" |
| Lock System | Six position locking with pneumatic single-point safety release |
| Colors Available | Black |
| ALI® Certified | Yes |
| Runways | Adjustable |
| Anti-Sway Device | Included |
| Turntable Cutouts | Front |
| Approach Ramps | Fold-down with jack rails |
Installation Requirements
- Concrete must meet Challenger's published thickness, strength, and cure requirements for this model.
- Electrical service sized to the motor specification above, run by a licensed electrician.
- Shop air plumbed to the lift for the pneumatic lock release.
- Installation performed by qualified technicians and commissioned to manufacturer procedure.
- Alamo coordinates freight, rigging, installation, and startup as part of the purchase.
Challenger Lifts Warranty
Challenger Lifts backs the 44030XAR with the following manufacturer coverage to the original owner. Alamo routes service and support after the sale.
| Component | Coverage Term |
| Structural parts | 1 Year |
| Functional parts | 1 Year |
| Labor | 1 Year |
Warranty is to the original owner. Coverage excludes normal wear, improper installation, and unapproved parts. Warranty service is through Alamo Equipment & Service - call (817) 865-3707.
Frequently Asked Questions - 44030XAR
Why Buy the 44030XAR from Alamo Equipment & Service?
- We install it. Alamo anchors, wires, and sets up the 44030XAR so you're not coordinating contractors.
- We service it. After install, call the same equipment team at (817) 865-3707.
- We size it with you. At 30,000 lb and a 350" maximum wheelbase, we confirm it against your bay and vehicle mix before you order.
- Freight handled. This lift ships freight; Alamo coordinates delivery to your bay.
- Expert comparison help. We'll help you pick the right configuration for your shop if the 44030XAR isn't the exact fit.
A shop buying from a pure e-commerce retailer gets a box. A shop buying from Alamo gets a partner.
Shipping follows the method shown on the product page and at checkout. Standard parcel, calculated LTL, freight quotes, included freight, and pickup may apply by item.