Challenger 9K Versymmetric® 2-Post #CL10A-XP9-DPC-QC
Couldn't load pickup availability
Meets the highest safety standards set by the Automotive Lift Institute.
Quick Specs
| Model / Part Number | CL10A-XP9-DPC-QC |
| Capacity | 9,000 lbs |
| ALI/ETL Certified | ✓ Yes |
| Lift Type | Versymmetric® 2-Post (XP9 Low-Ceiling) |
| Ceiling Height Required | 12' minimum |
| Rise Height | 70" |
| Speed of Rise | 27 seconds (QuickCycle™) |
| Motor | 3 HP, 208–230V, 1-Phase |
| Overall Height | 11' 2" / 11' 8" (configurable) |
| Overall Width | 11' 6.5" – 11' 11" (adjustable) |
| Colors | Red, Blue, Black |
| Free Shipping | ✓ Included (48 states) |
| Installation | Available — call (817) 865-3707 |
Most shops run a mix of cars, SUVs, and light trucks in tight bays. The Challenger CL10A-XP9-DPC-QC is built for exactly that problem: full Versymmetric® flexibility in a low-ceiling-friendly package, with Quick Cycle speed to keep the line moving. If your ceiling tops out at 12 feet, this is the lift that fits without compromise.
Versymmetric® Arm Technology
The XP9 carries Challenger's full Versymmetric® arm system — the same design found on their full-height models. You can spot vehicles in symmetric or asymmetric position without reconfiguring anything. Cars, crossovers, SUVs: load them in whatever position clears the doors and reaches the manufacturer's lift points. The directSPOT™ 3-stage arms (front and rear) eliminate the back-and-forth shuffle that wastes time on standard lifts. First-try spotting, every time.
QuickCycle™ Speed — 27-Second Rise
The XP9 rises in 27 seconds and lowers in only 17 seconds. In a production shop turning 8–12 vehicles a day, that cycle time advantage is real money. Most 2-post lifts run 45–60 seconds to full height — QuickCycle™ cuts that roughly in half.
Dual Pendant Power Controls
The dual pendant controls let your tech operate from either side of the vehicle. No stretching across the bay, no awkward angles when the car is up. Small ergonomic detail that adds up when you're running the lift 40+ times a week.
Adjustable Width Configuration
Column spread adjusts to match your bay. Overall width runs from 11' 6.5" to 11' 11" — wide enough for most vehicles, narrow enough to fit standard service bays without sacrificing door clearance.
Height Configurations — Built for Low Ceilings
The XP9 designation means this model is engineered for shops with 12-foot ceiling clearance — tighter than the standard 13'+ most 2-post lifts require. Overall column height is 11' 2" or 11' 8" depending on configuration. Height extension kits (2-ft or 3-ft) are available if your ceiling gives you room to grow. Minimum concrete: 4 inches at 3,000 PSI. Anchors included.
A shop buying from a box-drop retailer gets a pallet. A shop buying from Alamo gets a partner — we sell it, install it, service it, and inspect it. Call (817) 865-3707.
Frequently Asked Questions
Is the Challenger CL10A-XP9-DPC-QC ALI certified?
Yes. ALI/ETL Listed and Gold Label certified — meets the Automotive Lift Institute's highest safety standards.
What does XP9 mean on a Challenger lift?
XP9 is Challenger's low-ceiling column configuration. Requires only 12' clearance vs 13'3"+ for standard height models. Built for tight-ceiling shops.
What ceiling height does the CL10A-XP9 need?
Minimum 12 feet from finished floor to lowest overhead obstruction. Measure before ordering.
What is the lifting capacity?
9,000 lbs. Handles most cars, crossovers, SUVs, and light trucks. For vehicles over 9,000 lbs consider the Challenger E15 or 4-post.
What is Versymmetric and how does it differ from standard asymmetric?
Versymmetric does both symmetric and asymmetric loading in the same lift — no reconfiguring. Plus directSPOT 3-stage arms eliminate vehicle shuffling. Challenger exclusive.
What concrete is required?
Minimum 4" thick, reinforced, 3,000 PSI. Anchor bolts included. Consult installer if slab is thinner or unreinforced.
Does Alamo offer installation?
Yes — professional installation, annual inspections, ongoing service nationwide. Call (817) 865-3707.
How fast does the XP9 raise a vehicle?
27 seconds rise, 17 seconds lower with QuickCycle™. Standard lifts run 45–60 seconds.
Best For
✓ Shops with 12-foot ceilings (XP9 low-ceiling design)
✓ General auto repair bays — cars, crossovers, light SUVs
✓ Express service and quick-lube operations needing fast cycle time
✓ Shops wanting Versymmetric flexibility without a tall column footprint
✓ Upgrading from an entry-level lift to ALI-certified commercial grade
✗ Not ideal for heavy-duty trucks over 9,000 lbs (consider CL12 or E15)
✗ Not ideal for ceilings under 12 feet
✗ Not ideal for shops needing full 74"+ rise height (standard CL10AV3 gives 74.125")
Installation Requirements
• Concrete: Minimum 4" thick, 3,000 PSI reinforced slab
• Anchor bolts: Included with lift
• Electrical: 208–230V, single-phase, dedicated circuit (3 HP motor)
• Ceiling clearance: 12' minimum to lowest overhead obstruction
• Bay width: Allow 11' 11" minimum column spread
• Professional installation strongly recommended
• Alamo offers nationwide installation — call (817) 865-3707
Why Buy This Challenger CL10A-XP9 From Alamo Equipment
✓ Alamo can help confirm whether the XP9 low-ceiling column package is the right fit for a true 12' bay before the lift ships
✓ The CL10A-XP9 gives shops Challenger Versymmetric flexibility, dual pendant controls, and QuickCycle speed in a shorter 9,000 lb package
✓ Lift specialists can help compare the XP9 against the standard CL10AV3 if the buyer is balancing ceiling height against maximum rise
✓ Alamo sells, installs, services, and inspects Challenger lifts, so the buyer has support beyond the freight delivery
✓ Installation planning can cover slab, anchor, electrical, column spread, and bay layout before the project starts
✓ Free shipping to the 48 contiguous states unless noted otherwise
📞 (817) 865-3707
Challenger CL10A-XP9-DPC-QC vs APlusLift HW-10ASY
Both are Alamo-sold overhead 2-post options for shops working around 10K-class vehicles. The Challenger XP9 is the premium low-ceiling choice with ALI/ETL certification, Versymmetric® spotting, directSPOT arms, and QuickCycle speed. The APlusLift HW-10ASY is the value alternative with 10,000 lb capacity and combo symmetric/asymmetric setup.
| Spec | Challenger CL10A-XP9-DPC-QC | APlusLift HW-10ASY |
|---|---|---|
| Capacity | 9,000 lbs | 10,000 lbs |
| Certification / Positioning | ALI/ETL certified premium low-ceiling Challenger | CE-certified value 10K option |
| Arm Design | Versymmetric® with directSPOT 3-stage arms | Symmetric/asymmetric combo arm arrangement |
| Overall Height | 11' 2" / 11' 8" configurable | 141 3/16" |
| Lift Height | 70" rise height | 81" max with truck adapters |
| Best Fit | Pro shops that need low-ceiling fit, certification, and faster cycle time | Budget-conscious buyers who still want a 10K Alamo-sold 2-post lift |
Choose the XP9 for certified Challenger performance in a tighter bay. Choose the APlusLift HW-10ASY when price and 10K capacity are the stronger buying drivers.
Free shipping: Orders ship free to the 48 contiguous states.
Real lift support: Alamo can help with model selection, bay fit, installation planning, maintenance, inspections, and service after the sale.
Commercial shop focus: This is not a generic pallet drop. You are buying from a team that works with automotive shop equipment every day.
Questions before you order? Call (817) 865-3707.
Shipping Information:
Customers may pick up their lift at the nearest freight terminal at no additional cost.
You will need to provide your own trailer. Terminal staff will safely load the lift onto your trailer. The RECEIVER/CUSTOMER is solely responsible for properly securing the load for transport.
To schedule a pickup, contact us at info@alamoequipment.com or
(817) 865-3707. Please include the lift model and your zip code so we can direct you to the appropriate terminal.
Challenger Warranty
Challenger Lifts, Inc. lifts are guaranteed to the original owner. CLI shall repair or replace, at CLI option, for the full warranty period those parts that prove upon inspection to be defective and pay for reasonable costs of transportation and/or labor for replacement of said parts for the warranty period stated below. This warranty shall not apply unless the product is installed, used and maintained according to CLI’s specifications set forth in CLI’s installation, operation and maintenance instructions. Use of any unapproved parts or accessories will void your warranty. This limited warranty extends only to the original purchaser and is not transferable. This warranty is valid only if the product has been registered with Challenger Lift, Inc., www.challengerlifts.com.
This warranty does not cover normal maintenance or adjustments, damage or malfunction caused by improper handling, installation, abuse, misuse, negligence, carelessness of operation, or normal wear and tear. In addition, this warranty does not cover equipment when repairs have been attempted or made by anyone other than a CLI authorized service representative.
This warranty is exclusive and is in lieu of all other warranties expressed or implied including any implied warranty of fitness for a particular purpose, which implied warranties are expressly excluded. No employee, agent, representative, dealer or other person or entity is authorized to give any warranties of any nature on behalf of CLI.
The remedies described are exclusive and in no event shall CLI, Inc. be liable for special, consequential or incidental damages for the breach of or delay in performance of the warranty. This warranty shall be governed by the Commonwealth of Kentucky, and shall be subject to the exclusive jurisdiction of the Court in the Commonwealth of Kentucky in the County of Jefferson. Functional parts are any wear items, as defined from time to time by Challenger Lifts. Examples include power units, cylinders, sheaves, hoses, cables, controls, etc. and may differ depending on the model of lift.
Structural parts are items, as defined from time to time by Challenger Lifts, Inc. that are not Functional Parts and include items like carriage, columns, arms, runways, plungers, etc. and may differ depending on the type of lift.
Note: WARRANTY CARD MUST BE COMPLETED AND RETURNED UPON INSTALLATION FOR VALIDATION or WARRANTY PERIOD WILL BEGIN FROM INVOICE DATE OF LIFT PURCHASE. WARRANTY MAY ALSO BE VALIDATED BY REGISTERING ONLINE @ www.challengerlifts.com/register-your-lift