Challenger 12K Heavy-Duty Symmetric 2-Post Lift #CL12A-LC-QC-EV

Challenger CL12A-LC-QC-EV 12,000 lb Symmetric 2-Post Lift

A 10K lift running at its limit on every truck and van that rolls in is a margin problem, not a convenience issue. The CL12A-LC-QC-EV gives that bay 12,000 lb of real capacity instead.

The CL12A-LC-QC-EV runs 3-stage front and rear arms at 12,000 lbs capacity, with an overall width that sets to 142" / 148" / 154" at install. It uses Challenger's standard single-point control layout, which keeps the lift simpler to operate. QuickCycle trims real seconds off every rise and lower. The EV Kit adds low-profile, EV-ready foot pads and adapters for the EVs and hybrids on the schedule.

Columns stand 11' 11" on this configuration — plan for a 12' minimum ceiling and measure to your lowest overhead obstruction before you order.

Who the CL12A-LC-QC-EV Is Built For

• Shops running vehicles at or near a 10K lift's limit — 12,000 lbs of rated capacity gives real margin back on the trucks and vans a lighter lift can't safely handle.
• Single-operator shops that don't need dual-station controls — one control point is simpler to run and typically costs less than a DPC configuration.
• Bays that can clear 12' of ceiling — this configuration's 11' 11" columns are sized for that clearance; a shorter ceiling needs a different CL12A build.
• High-volume bays counting minutes per vehicle — QuickCycle's faster rise and lower adds up across a full day of cycles.
• Shops already seeing EVs and hybrids on the schedule — the included EV Kit means you're not improvising a battery-safe lift point mid-job.

What the CL12A-LC-QC-EV Is NOT Built For

Skip this configuration if your ceiling cannot clear 11' 11", your vehicles exceed 12,000 lbs, or your slab has not been evaluated. When any of those are borderline, call Alamo at (817) 865-3707 before you order.

What Makes the CL12A-LC-QC-EV Different

Configuration Highlights

• Single-point mechanical lock release - one motion drops the locks on both columns.
• Quick Cycle - faster up-and-down cycling to cut dead time between jobs.
• EV package - adjustable width and height plus the 10315 Adapter Kit, two 10313 6" adapters, two 10316 adapter caddies, and a set of EV footpads.
• Low Ceiling design - columns stand 11' 11", the shortest configuration in the CL12A family.
• 3-stage front and rear arm sets - adjustable between 27.5" and 59".
• Pick your overall width at install: 142" / 148" / 154".

Bay Planning Numbers

The measurements that matter here: 11' 11" column height, 142" / 148" / 154" adjustable overall width, and 103.5", 109.5" or 115.5" drive-thru clearance. Compare those against doors, lights, air lines, drains, and any overhead obstruction.

Electrical and Install Coordination

Published electrical is 2HP, 208v-230v, 60Hz, 1Ph. Have a licensed electrician confirm the circuit, disconnect, and local code requirements ahead of installation day.

Full Specifications - CL12A-LC-QC-EV

Challenger Lifts Warranty - CL12 Series

Challenger Lifts backs the CL12A series with the following manufacturer coverage to the original owner. Alamo routes service and support after the sale.

Warranty is to the original owner and requires registration with Challenger Lifts within 30 days of installation (otherwise the period begins from the invoice date). Coverage excludes normal wear, improper installation, and unapproved parts. Warranty service is through Alamo Equipment & Service - call (817) 865-3707.