FS-Curtis CA10 120G Duplex 10(2)HP Ultra Pack Air Compressor #CA10-DUP
Couldn't load pickup availability
| Model / Part Number | CA10 Duplex Ultra Pack |
| Horsepower | 10 HP (x2, Duplex) |
| Tank | 120 Gallon Horizontal ASME |
| Airflow | 68.4 CFM @ 175 PSI |
| Pressure Range | 175 PSI |
| Warranty | 12 months |
FS-Curtis CA10-DUP — 10 HP (x2, Duplex) Air Compressor
A high-volume shop that's had a compressor failure cost real money — a job that couldn't ship, a bay that sat idle for a day waiting on a part — knows redundancy isn't optional at this scale, and neither is clean, dry air when moisture has already ruined a finish before.
The FS-Curtis CA10-DUP is a duplex two-stage reciprocating, ultra pack compressor rated for 10 HP (x2, Duplex) with a 120 gallon horizontal ASME tank, built for multi-bay shops and commercial operations that need compressed air on tap all day. The included Ultra Pack — factory-installed automatic tank drain and refrigerated air dryer — cuts down on the maintenance routine so your team spends less time babysitting the compressor and more time on paying work.
Who the CA10-DUP Is Built For
- ✅ A high-volume auto body or fleet shop that's already lost a full day's billable bay time to a single compressor failure, and can't afford to gamble on that happening again during a peak week
- ✅ A paint or finishing operation running 10 HP-class demand where a moisture-related comeback job has already cost more than the Ultra Pack accessory bundle would have
- ✅ A facility manager scheduling routine pump maintenance around a single compressor's downtime, wanting to service one pump while the second keeps the floor running uninterrupted
- ✅ A multi-location operator who's seen the Ultra Pack's auto-drain and dryer pay off at a smaller CA5/CA7.5 site and wants the same reliability at the flagship location's higher demand
- ✅ A shop planning a second-shift or expansion push in the next year that would rather size up to the full duplex Ultra Pack now than retrofit accessories onto a base unit later
What the CA10-DUP Is NOT Built For
- ❌ Single-bay or small shops — this is the most expensive configuration in the CA10 line and is overkill for lighter demand
- ❌ Budget-conscious buyers — the base CA10-D duplex without Ultra Pack saves meaningfully if accessories aren't needed yet
- ❌ Shops with limited floor space — the largest footprint in the CA10 line at 90" long
What Makes the CA10-DUP Different
Commercial 2-Stage Pump
The CA10-DUP uses an E71 (x2), Cast-Iron, Two-Stage pump built for daily, all-day duty cycles — not a hobby-grade single-stage unit that struggles under continuous shop use.
CFM & Pressure Output
Delivers 68.4 CFM @ 175 PSI and holds pressure up to 175 PSI, enough headroom to run impact wrenches, tire equipment, and paint tools without the tank running dry.
Ultra Pack Upgrades
Includes factory-installed automatic tank drain and refrigerated air dryer — upgrades that reduce maintenance and extend the life of the tank and pump versus a base-model compressor.
Power Requirements
Three-Phase, 230V/460V options available. Confirm your panel and breaker sizing with an electrician before delivery.
- Redundancy + high CFM + accessories
- High-volume commercial shops
- Maximum headroom for growth
- Single-bay / small shops
- Budget-first buyers
CA10-DUP vs. FS-Curtis CA15-H (15 HP Simplex, No Ultra Pack) — Which Compressor Is Right for Your Shop?
| Decision Point | CA10-DUP | FS-Curtis CA15-H (15 HP Simplex, No Ultra Pack) |
|---|---|---|
| Horsepower / Tank | 10 HP x2 / 120 Gal | 15 HP / 120 Gal |
| CFM @ 175 PSI | 68.4 CFM | 42.6 CFM |
| Redundancy + accessories | Duplex pumps + Ultra Pack bundle (auto-drain/dryer) | Simplex, standard configuration |
| Best fit | Shops wanting redundancy, high CFM, and factory accessories together | Shops wanting the highest single-pump horsepower without duplex cost |
Choose the CA10-DUP for the most fully-equipped, redundant, high-CFM setup with factory accessories. Choose the CA15-H for the highest single-pump horsepower in the CA line at a lower price if redundancy isn't required. Both stay inside Alamo’s catalog — call (817) 865-3707.
Full Specifications — CA10-DUP
| Model / Part Number | CA10 Duplex Ultra Pack |
| Horsepower | 10 HP (x2, Duplex) |
| Pump | E71 (x2), Cast-Iron, Two-Stage |
| Configuration | Duplex Two-Stage Reciprocating, Ultra Pack |
| Tank | 120 Gallon Horizontal ASME |
| Airflow | 68.4 CFM @ 175 PSI |
| Pressure Range | 175 PSI |
| Motor / Electrical | Three-Phase, 230V/460V options available |
| Phase / Hz / Voltage |
Three Phase: 3/60/200-208V (FCA10E71D1U-A9L1XX) |
| Ultra Pack Features | factory-installed automatic tank drain and refrigerated air dryer |
| Overall Dimensions | 90" L x 32" W x 53" H |
| Shipping Weight | 1,311 lbs |
| Warranty | 12 months |
⚠️ Setup Requirements
- Electrical: Three-Phase, 230V/460V options available; have an electrician confirm your panel capacity before delivery.
- Floor space: 90" L x 32" W x 53" H footprint; plan clear access on at least two sides for maintenance and tank drain.
- Ventilation: Locate in a dry, ventilated area away from dust and moisture to protect the pump and tank.
- Weight: 1,311 lbs shipping weight — confirm your floor/dock can receive and position the unit.
- Setup: Installation is available as a quoted service (piping, electrical tie-in, functional test) — it’s not included in the purchase price. Call (817) 865-3707 for an install quote if you’d like Alamo’s crew to set it up.
FS-Curtis Warranty — CA10-DUP
FS-Curtis backs the CA10-DUP with a 1-year parts-only warranty.
| Component | Coverage Term |
|---|---|
| Tank & pump | 1 year parts |
| Motor & electrical components | 1 year parts |
| Ultra Pack accessories (auto tank drain, refrigerated air dryer) | 1 year parts |
| Wear items (belts, filters, gaskets) | Not covered (consumable) |
Warranty service is through Alamo Equipment & Service — call (817) 865-3707 instead of waiting on a manufacturer hotline. Coverage is subject to FS-Curtis warranty terms, conditions, and requirements.
Frequently Asked Questions — FS-Curtis CA10-DUP
Why Buy the CA10-DUP from Alamo Equipment & Service?
- Installation available. Buying online gets you the compressor — piping and electrical tie-in are an extra-charge service. We have the crews to install it and can quote that separately; call (817) 865-3707 for a quote.
- We service it. These compressors need preventative maintenance up to 4x a year per the manufacturer — oil changes, belt and air filter checks, contactor and electrical inspection. Call (817) 865-3707 for maintenance, repairs, or support — and if you ever need warranty work, we register your equipment with the manufacturer and handle the claim directly, so you’re not stuck navigating vendor support on your own.
- We size it with you. 10 HP (x2, Duplex), 120 Gallon Horizontal ASME tank, 68.4 CFM @ 175 PSI — we’ll confirm this matches your shop’s actual air draw before you order.
- Free shipping. Ships free to the 48 contiguous states.
- Expert comparison help. Not sure if the CA10-DUP or the FS-Curtis CA15-H (15 HP Simplex, No Ultra Pack) is the better fit? We’ll walk you through it.
A shop buying from a pure e-commerce retailer gets a box. A shop buying from Alamo gets a partner.
Ships by freight. Add to cart and enter your ZIP for a freight quote, or call us.
See the attached document for FS CURTIS WARRANTY