FS-Curtis CC1.5 30G Horiz 1.5HP Simplex Climate Cont Air Comp #CC1.5-H
Couldn't load pickup availability
FS-Curtis Shipping
Equipment and Parts: Free Shipping
| Model / Part Number | CC1.5 Simplex |
| Horsepower | 1.5 HP |
| Tank | 30 Gallon Horizontal ASME |
| Airflow | 3.5 CFM @ 80 PSI |
| Pressure Range | 80 PSI |
| Warranty | 12 months |
FS-Curtis CC1.5-H — 1.5 HP Air Compressor
A commercial office building has more pneumatic thermostats and VAV box actuators than a smaller controls compressor can reliably keep pressurized, and zones start drifting out of temperature range when the air supply can't keep up.
The FS-Curtis CC1.5-H is a simplex, climate control compressor rated for 1.5 HP with a 30 gallon horizontal ASME tank, built for shops and commercial operations that need compressed air on tap all day without paying for accessories they don’t need.
Who the CC1.5-H Is Built For
- ✅ A mid-size commercial building with more pneumatic thermostats and VAV actuators than a CC.75 can reliably support, where zones have started drifting out of temperature range
- ✅ A controls contractor upgrading an older, undersized compressor that's been struggling to keep pressure across an expanded pneumatic-control system
- ✅ A facility with a moderate-size mechanical room that has space for a slightly larger unit but doesn't need duplex redundancy
- ✅ A building engineer standardizing on FS-Curtis's Climate Control line, sizing up from the CC.75 tier for a bigger building
- ✅ A light-commercial application needing more sustained instrumentation air than the smallest tier in this line provides
What the CC1.5-H Is NOT Built For
- ❌ Small buildings or mechanical rooms with only a few pneumatic devices — the smaller CC.75-H saves money
- ❌ Automotive or general repair shops — this line is for controls/instrumentation air, not shop-air tools
- ❌ Critical facilities needing redundancy — look at the CC1.5-D duplex instead
What Makes the CC1.5-H Different
Single-Stage Pump, Built for Continuous Duty
The FS-Curtis CC1.5-H uses an ES10 pump — a reliable single-stage design sized for the steady, low-pressure control-air demand of pneumatic thermostats and actuators, built to run continuously without the wear a smaller hobby-grade pump would see under the same duty cycle.
CFM & Pressure Output
Delivers 3.5 CFM @ 80 PSI and holds pressure up to 80 PSI, enough headroom to supply reliable air to pneumatic thermostats, damper actuators, and control instrumentation without the tank running dry.
Power Requirements
Single or Three-Phase, 115V/230V/460V options available. Confirm your panel and breaker sizing with an electrician before delivery.
- More pneumatic devices per loop
- Mid-size commercial buildings
- Same compact footprint as CC.75
- Small buildings / few devices
- Critical facilities needing redundancy
CC1.5-H vs. FS-Curtis CC.75-H (0.75 HP, Simplex) — Which Compressor Is Right for Your Shop?
| Decision Point | CC1.5-H | FS-Curtis CC.75-H (0.75 HP, Simplex) |
|---|---|---|
| Horsepower / Tank | 1.5 HP / 30 Gal Horizontal | 0.75 HP / 30 Gal Horizontal |
| CFM @ 80 PSI | 3.5 CFM | 2.1 CFM |
| Use case | Larger control systems needing more sustained airflow | Smaller pneumatic-control systems, tight mechanical rooms |
| Best fit | Buildings with more pneumatic devices on the loop | Smaller buildings or fewer pneumatic devices |
Choose the CC1.5-H when more pneumatic devices are on the same control loop and need more sustained airflow. Choose the CC.75-H for smaller pneumatic-control systems where 2.1 CFM covers the load. Both stay inside Alamo’s catalog — call (844) 480-6059.
Full Specifications — CC1.5-H
| Model / Part Number | CC1.5 Simplex |
| Horsepower | 1.5 HP |
| Pump | ES10 |
| Configuration | Simplex, Climate Control |
| Tank | 30 Gallon Horizontal ASME |
| Airflow | 3.5 CFM @ 80 PSI |
| Pressure Range | 80 PSI |
| Motor / Electrical | Single or Three-Phase, 115V/230V/460V options available |
| Phase / Hz / Voltage |
Single Phase: 1/60/115V (FCC11S01H3S-A1F1XX) 1/60/230V (FCC11S01H3S-A2F1XX) Three Phase: 3/60/200V (FCC11S01H3S-A9F1XX) 3/60/230V (FCC11S01H3S-A3F1XX) 3/60/460V (FCC11S01H3S-A4F1XX) |
| Overall Dimensions | 20" L x 42" W x 36" H |
| Shipping Weight | 220 lbs |
| Warranty | 12 months |
⚠️ Setup Requirements
- Electrical: Single or Three-Phase, 115V/230V/460V options available; have an electrician confirm your panel capacity before delivery.
- Floor space: 20" L x 42" W x 36" H footprint; plan clear access on at least two sides for maintenance and tank drain.
- Ventilation: Locate in a dry, ventilated area away from dust and moisture to protect the pump and tank.
- Weight: 220 lbs shipping weight — confirm your floor/dock can receive and position the unit.
- Setup: Installation is available as a quoted service (piping, electrical tie-in, functional test) — it’s not included in the purchase price. Call (844) 480-6059 for an install quote if you’d like Alamo’s crew to set it up.
FS-Curtis Warranty — CC1.5-H
FS-Curtis backs the CC1.5-H with a 1-year parts-only warranty.
| Component | Coverage Term |
|---|---|
| Tank & pump | 1 year parts |
| Motor & electrical components | 1 year parts |
| Wear items (belts, filters, gaskets) | Not covered (consumable) |
Warranty service is through Alamo Equipment & Service — call (844) 480-6059 instead of waiting on a manufacturer hotline. Coverage is subject to FS-Curtis warranty terms, conditions, and requirements.
Frequently Asked Questions — FS-Curtis CC1.5-H
Why Buy the CC1.5-H from Alamo Equipment & Service?
- Installation available. Buying online gets you the compressor — piping and electrical tie-in are an extra-charge service. We have the crews to install it and can quote that separately; call (844) 480-6059 for a quote.
- We service it. These compressors need preventative maintenance up to 4x a year per the manufacturer — oil changes, belt and air filter checks, contactor and electrical inspection. Call (844) 480-6059 for maintenance, repairs, or support — and if you ever need warranty work, we register your equipment with the manufacturer and handle the claim directly, so you’re not stuck navigating vendor support on your own.
- We size it with you. 1.5 HP, a 30 gallon horizontal ASME tank, 3.5 CFM @ 80 PSI — we’ll confirm this matches your shop’s actual air draw before you order.
- Free shipping. Ships free to the 48 contiguous states.
- Expert comparison help. Not sure if the CC1.5-H or the FS-Curtis CC.75-H (0.75 HP, Simplex) is the better fit? We’ll walk you through it.
A shop buying from a pure e-commerce retailer gets a box. A shop buying from Alamo gets a partner.
Shipping Rates and Delivery Estimates: Shipping is FREE to the 48 contiguous United States.
Shipment Processing Time: All orders are processed within [2–3] business days of receipt, excluding weekends and holidays. Orders are not processed or shipped from Friday at 12 pm CST through Sunday or on holidays. During periods of high order volume, shipments may be delayed by a few days. Customers will be notified via email or phone in the event of significant delays.
See the attached document for FS CURTIS WARRANTY