FS-Curtis CC.75 30G Horiz .75HP Simplex Climate Cont Air Comp #CC.75-H
Couldn't load pickup availability
FS-Curtis Shipping
Equipment and Parts: Free Shipping
| Model / Part Number | CC.75 Simplex |
| Horsepower | 0.75 HP |
| Tank | 30 Gallon Horizontal ASME |
| Airflow | 2.1 CFM @ 80 PSI |
| Pressure Range | 80 PSI |
| Warranty | 12 months |
FS-Curtis CC.75-H — 0.75 HP Air Compressor
A building automation contractor is standing in a mechanical room that's already tight on space, and the facility manager wants pneumatic thermostats and damper actuators running reliably without a shop-grade compressor's noise and footprint eating up the room.
The FS-Curtis CC.75-H is a simplex, climate control compressor rated for 0.75 HP with a 30 gallon horizontal ASME tank, built for shops and commercial operations that need compressed air on tap all day without paying for accessories they don’t need.
Who the CC.75-H Is Built For
- ✅ A building automation or HVAC controls contractor supplying air to pneumatic thermostats, damper actuators, and control valves in a small commercial building or mechanical room
- ✅ A facility maintenance team maintaining an older pneumatic control system where consistent, low-volume air supply matters more than high CFM output
- ✅ A mechanical room with tight space where a compact 30-gallon horizontal tank fits where a larger shop-air compressor wouldn't
- ✅ An owner replacing a failing or noisy legacy pneumatic-control air source who wants a quieter, more efficient dedicated unit
- ✅ A light-commercial application needing steady instrumentation air rather than high-volume tool air
What the CC.75-H Is NOT Built For
- ❌ Automotive or general repair shops running impact wrenches, tire equipment, or paint guns — this unit is sized for controls/instrumentation air, not tool air; look at the CA or ML Series instead
- ❌ Facilities needing more than roughly 2-3 CFM continuous — step up to the CC1.5 or larger
- ❌ Buyers wanting factory-installed accessories — this is a base simplex configuration
What Makes the CC.75-H Different
Single-Stage Pump, Built for Continuous Duty
The FS-Curtis CC.75-H uses an ES06 pump — a reliable single-stage design sized for the steady, low-pressure control-air demand of pneumatic thermostats and actuators, built to run continuously without the wear a smaller hobby-grade pump would see under the same duty cycle.
CFM & Pressure Output
Delivers 2.1 CFM @ 80 PSI and holds pressure up to 80 PSI, enough headroom to supply reliable air to pneumatic thermostats, damper actuators, and control instrumentation without the tank running dry.
Power Requirements
Single or Three-Phase, 115V/230V/460V options available. Confirm your panel and breaker sizing with an electrician before delivery.
- Pneumatic controls / HVAC-BAS air
- Compact mechanical-room footprint
- Quiet, dedicated controls air source
- Shop-air / tool applications
- Systems needing 3+ CFM
CC.75-H vs. FS-Curtis CC1.5-H (1.5 HP, 30 Gal) — Which Compressor Is Right for Your Shop?
| Decision Point | CC.75-H | FS-Curtis CC1.5-H (1.5 HP, 30 Gal) |
|---|---|---|
| Horsepower / Tank | 0.75 HP / 30 Gal Horizontal | 1.5 HP / 30 Gal Horizontal |
| CFM @ 80 PSI | 2.1 CFM | 3.5 CFM |
| Use case | Smaller pneumatic-control systems, tight mechanical rooms | Larger control systems needing more sustained airflow |
| Best fit | Smaller buildings or fewer pneumatic devices on the loop | Buildings with more pneumatic thermostats/actuators on one system |
Choose the CC.75-H for smaller pneumatic-control systems where 2.1 CFM covers the load. Choose the CC1.5-H when more pneumatic devices are on the same control loop and need more sustained airflow. Both stay inside Alamo’s catalog — call (844) 480-6059.
Full Specifications — CC.75-H
| Model / Part Number | CC.75 Simplex |
| Horsepower | 0.75 HP |
| Pump | ES06 |
| Configuration | Simplex, Climate Control |
| Tank | 30 Gallon Horizontal ASME |
| Airflow | 2.1 CFM @ 80 PSI |
| Pressure Range | 80 PSI |
| Motor / Electrical | Single or Three-Phase, 115V/230V/460V options available |
| Phase / Hz / Voltage |
Single Phase: 1/60/115V (FCC34S06H3S-A1F1XX) 1/60/230V (FCC34S06H3S-A2F1XX) Three Phase: 3/60/200V (FCC34S06H3S-A9F1XX) 3/60/230V (FCC34S06H3S-A3F1XX) 3/60/460V (FCC34S06H3S-A4F1XX) |
| Overall Dimensions | 20" L x 42" W x 32" H |
| Shipping Weight | 165 lbs |
| Warranty | 12 months |
⚠️ Setup Requirements
- Electrical: Single or Three-Phase, 115V/230V/460V options available; have an electrician confirm your panel capacity before delivery.
- Floor space: 20" L x 42" W x 32" H footprint; plan clear access on at least two sides for maintenance and tank drain.
- Ventilation: Locate in a dry, ventilated area away from dust and moisture to protect the pump and tank.
- Weight: 165 lbs shipping weight — confirm your floor/dock can receive and position the unit.
- Setup: Installation is available as a quoted service (piping, electrical tie-in, functional test) — it’s not included in the purchase price. Call (844) 480-6059 for an install quote if you’d like Alamo’s crew to set it up.
FS-Curtis Warranty — CC.75-H
FS-Curtis backs the CC.75-H with a 1-year parts-only warranty.
| Component | Coverage Term |
|---|---|
| Tank & pump | 1 year parts |
| Motor & electrical components | 1 year parts |
| Wear items (belts, filters, gaskets) | Not covered (consumable) |
Warranty service is through Alamo Equipment & Service — call (844) 480-6059 instead of waiting on a manufacturer hotline. Coverage is subject to FS-Curtis warranty terms, conditions, and requirements.
Frequently Asked Questions — FS-Curtis CC.75-H
Why Buy the CC.75-H from Alamo Equipment & Service?
- Installation available. Buying online gets you the compressor — piping and electrical tie-in are an extra-charge service. We have the crews to install it and can quote that separately; call (844) 480-6059 for a quote.
- We service it. These compressors need preventative maintenance up to 4x a year per the manufacturer — oil changes, belt and air filter checks, contactor and electrical inspection. Call (844) 480-6059 for maintenance, repairs, or support — and if you ever need warranty work, we register your equipment with the manufacturer and handle the claim directly, so you’re not stuck navigating vendor support on your own.
- We size it with you. 0.75 HP, a 30 gallon horizontal ASME tank, 2.1 CFM @ 80 PSI — we’ll confirm this matches your shop’s actual air draw before you order.
- Free shipping. Ships free to the 48 contiguous states.
- Expert comparison help. Not sure if the CC.75-H or the FS-Curtis CC1.5-H (1.5 HP, 30 Gal) is the better fit? We’ll walk you through it.
A shop buying from a pure e-commerce retailer gets a box. A shop buying from Alamo gets a partner.
Shipping Rates and Delivery Estimates: Shipping is FREE to the 48 contiguous United States.
Shipment Processing Time: All orders are processed within [2–3] business days of receipt, excluding weekends and holidays. Orders are not processed or shipped from Friday at 12 pm CST through Sunday or on holidays. During periods of high order volume, shipments may be delayed by a few days. Customers will be notified via email or phone in the event of significant delays.
See the attached document for FS CURTIS WARRANTY