FS-Curtis RES1000-CFE Refrigerated Energy Saving Air Dryer #RES1000-CFE
Shipping information
Enter your delivery ZIP code to see priced freight options for this item. Rates match checkout exactly.
FS Curtis shipping quote
Shipping is quoted by destination before payment. Select your options, then request your freight quote.
We will confirm the shipping total before sending a payment link.
Couldn't load pickup availability
-
DESCRIPTION
The FS-Curtis RES1000-CFE Refrigerated Energy Saving Air Dryer #RES1000-CFE is the configuration equipped with a factory-installed CFE Mist Eliminator for enhanced air quality and system protection. Designed for compressed air systems rated up to 1000 CFM, this energy saving dryer uses an advanced thermal mass heat exchanger to reduce refrigeration compressor run time while maintaining a stable pressure dew point. The integrated CFE Mist Eliminator helps remove fine oil aerosols and contaminants, protecting downstream equipment and improving overall air system reliability. This configuration also qualifies for extended warranty coverage when properly maintained, making it an ideal choice for facilities that require cleaner air and long-term performance.
RES Series dryers are designed with 4-in-1 heat exchangers (patent pending) and a phase change material (PCM) encapsulated between the refrigeration and compressed air circuits, serving as a highly effective reservoir for thermal storage. The PCM possesses high latent heat properties which enables it to melt or freeze at a constant temperature. The phase change material will absorb heat from warm, moisture-laden compressed air without a significant rise in temperature. The phase change material stays colder for longer periods of time, cycling the refrigerant compressor less often than conventional energy-saving designs.
Dryers purchased with a CFE Mist Eliminator, will receive 3-Years of additional protection, parts, and labor. Five years total with the purchase of a maintenance kit on an annual basis.
-
FEATURES + BENEFITS
The RES Series is the ideal solution to reliably and economically dry compressed air. The innovative technology does not require a recirculating pump and associated piping. This results in a simpler, more energy-efficient design.
Stainless steel brazed plate 4-in-1 heat exchanger (patent pending), with phase change material reservoir
- The PCM thermal reservoir operates at a precise temperature to deliver a stable pressure dew point.
- Smooth, non-fouling stainless steel surfaces promote low resistance to flow, optimizing air system efficiency
No-air-loss, demand drain efficiently removes condensate without loss of compressed air
- Condensate drain lines terminate at discharge connections conveniently located on the side of the dryer
- Failure to discharge alarm on the operator interface enhances system reliability
High efficiency, up-flow aluminum air-cooled condenser
- Pulls ambient air through the condenser and releases out the top of the dryer condenser
- Provides cooler condensing air and greater efficiency
Reliable, semi-hermetic refrigerant compressors
- Environmentally friendly, globally accepted refrigerants
- Rugged design, for long-term operation
-
SPECIFICATIONS
Model Number RES1000-CFE Rated Flow scfm 1000 Available Voltage 460/3/60
Inlet/Outlet Connections FLG 3”
Power kW 5.8
Dimensions 58" L x 33" W x 63" D
Weight 1210 lbs
Maximum Inlet Temperature 120°F (49°C)
Your LTL freight rate is calculated at checkout. Each order may contain one lift or other freight-shipped item. Please order parts and additional freight items separately.
See the attached document for FS CURTIS WARRANTY