Graco Fire-Ball 425 50:1 Grease Pump, 400 lb Lube Truck Package #222075
Graco shipping quote
Shipping is quoted by destination before payment. Select your options, then request your freight quote.
We will confirm the shipping total before sending a payment link.
| Part Number | 222075 |
| Package Type | Fire-Ball 425 50:1 grease pump package — Lube Truck (400 lb) |
| Ratio | 50:1 |
| Pump Part Number | 205395 (Fire-Ball 425 50:1 pump, 400 lb drums) |
| Package Working Pressure | 4,000 psi (276 bar) — set by the included 222076 dispense kit |
| Maximum Package Air Pressure | 80 psi (0.55 MPa, 5.5 bar) |
| Dispense Kit | 222076 — rated 4,000 psi (276 bar) |
| Fluid Hose | 3/8 in. × 6 ft (hose 109163) |
| Coupled Air Hose | 205418 (6 ft) |
| Fittings | 155470 / 155494 |
| Air Hose | 1/2 in. × 6 ft |
| Air Inlet / Fluid Outlet | 1/2 in. NPT(F) / 3/8 in. NPT(F) |
| Follower Plate | 223846 |
| Drum Cover | 207366 |
| Hold-Down Kit | 207361 |
| Air Regulator | 104266 (1/2 in.) with gauge 100960 — ordered separately |
| Instruction Manual | 307880 |
| Package Weight (approx., shipped) | 93.75 lb |
| UPC | 633955084292 |
| Pump Maximum Fluid Working Pressure | 7,500 psi (517 bar / 51.7 MPa) |
| Air Motor Effective Diameter | 4.25 in. (108 mm) |
| Free Flow Rate @ 100 psi | 9 lb/min (4.1 kg/min) approximate |
| Continuous Duty Flow Rate | 3.35 lb/min (1.52 kg/min) |
| Output per Cycle / Cycles per Pound | 1.06 oz (30 g) / 15.1 |
| Pump Air Operation Range | 40 psi to 150 psi (pump rating) |
| Annual Usage Rating | 20,000+ lb (9,072+ kg) |
| Typical Fluid | Grease up to NLGI #2 |
Graco Fire-Ball 425 50:1 Grease Pump, 400 lb Lube Truck Package #222075
The Graco #222075 is the Fire-Ball 425 50:1 lube truck package for 400 lb (180 kg) drums — the high-volume mobile grease system for lube trucks and service vehicles: the pump threads through the drum cover on follower plate 223846, the hold-down kit 207361 keeps the drum stable on the road, and the 222076 dispense kit puts a 3/8 in. hose at the meter. One part number, complete system: pump 205395, kit, follower plate, drum cover 207366 and hold-down.
The Fire-Ball 425 50:1 carries a 4.25 in. air motor for long runs, higher volume and simultaneous dispenses: up to 7,500 psi of pump fluid working pressure, 9 lb/min free flow, 3.35 lb/min continuous duty and annual usage over 20,000 lb. The complete package works to the included kit's 4,000 psi (276 bar) rating. Note on air: the pump's rated range is 40–150 psi, but the package is held at or below 80 psi — 50:1 × 80 psi is the kit's 4,000 psi rating, the same package limit Graco publishes for its other 50:1 Fire-Ball 425 packages.
What the Package Includes
- Fire-Ball 425 50:1 pump 205395 (400 lb drum pump)
- Dispense kit 222076 (4,000 psi): 3/8 in. × 6 ft fluid hose (109163), 6 ft coupled hose (205418), fittings 155470/155494, 1/2 in. × 6 ft air hose
- Follower plate 223846, drum cover 207366, hold-down kit 207361
- Air regulator 104266 and gauge 100960 are specified but must be ordered separately
Not the Right Package If
- You feed from 120 lb (55 kg) containers — the 50:1 120 lb lube truck package is 223107
- You need the 75:1 ratio for a 400 lb lube truck — that is 243818
- The drum lives in a fixed bulk room — the stationary supply package is 225781; cover-mount stationary is 244635/244636
- You want forced-feed RAM dispensing for extreme-viscosity grease — the RAM packages are 244905/244906
Questions Shops Ask
Lube truck or stationary — what is the difference?
The lube truck package includes hold-down kit 207361 for mobile service; stationary packages leave it off. Same pump 205395, same kit, same 4,000 psi working pressure — the difference is where the drum rides.
What air supply does it need?
A 1/2 in. NPT(F) inlet. The pump's rated air range is 40–150 psi, but hold the package at or below 80 psi — 50:1 × 80 psi equals the kit's 4,000 psi rating. Order the 104266 regulator with the 100960 gauge separately and run the lowest pressure that gives good delivery.
Is a follower plate included?
Yes — 223846, with drum cover 207366 and hold-down kit 207361: the complete cover-mounted, mobile arrangement.
How does it ship?
Multi-box by LTL freight — call (817) 865-3707 for a freight quote before you order.
Why Buy from Alamo
- We sell the lube-truck package as a working system. Pump, follower plate, drum cover and hold-down confirmed against your container before the order goes in.
- We carry the consumables that follow it. Dispense kits, hoses, fittings, follower plates and seals — for the life of the install.
- Freight handled. Multi-box package — call (817) 865-3707 for a freight quote before you order.
Fitment & Setup
This is the 50:1 lube truck configuration for 400 lb (180 kg) drums (pump 205395, follower 223846, hold-down 207361). Keep the package at or below 80 psi air; the regulator 104266 with gauge 100960 must be ordered separately. For 120 lb containers use 223107; for stationary bulk rooms use 225781.
Need help matching the right Graco package to your bulk room? Call Alamo Equipment at (817) 865-3707.
Part numbers: 222075
Shipping is quoted by destination before payment. Select your product options and request a freight quote above. We will confirm the freight method and total before sending a payment link.