Graco Fire-Ball 425 50:1 Grease Pump, 120 lb Lube Truck Package #223107
Graco shipping quote
Shipping is quoted by destination before payment. Select your options, then request your freight quote.
We will confirm the shipping total before sending a payment link.
| Part Number | 223107 |
| Package Type | Fire-Ball 425 50:1 grease pump package — Lube Truck (120 lb) |
| Ratio | 50:1 |
| Pump Part Number | 205394 (Fire-Ball 425 50:1 pump, 120 lb container) |
| Package Working Pressure | 4,000 psi (276 bar) — set by the included 222076 dispense kit |
| Maximum Package Air Pressure | 80 psi (0.55 MPa, 5.5 bar) |
| Dispense Kit | 222076 — rated 4,000 psi (276 bar) |
| Fluid Hose | 3/8 in. × 6 ft (hose 109163) |
| Coupled Air Hose | 205418 (6 ft) |
| Fittings | 155470 / 155494 |
| Air Hose | 1/2 in. × 6 ft |
| Air Inlet / Fluid Outlet | 1/2 in. NPT(F) / 3/8 in. NPT(F) |
| Follower Plate | 223344 |
| Drum Cover | 222060 |
| Hold-Down Kit | 222061 |
| Air Regulator | 104266 (1/2 in.) with gauge 100960 — ordered separately |
| Instruction Manual | 307880 |
| Package Weight (approx., shipped) | 65.75 lb |
| UPC | 633955323070 |
| Pump Maximum Fluid Working Pressure | 7,500 psi (517 bar / 51.7 MPa) |
| Air Motor Effective Diameter | 4.25 in. (108 mm) |
| Free Flow Rate @ 100 psi | 9 lb/min (4.1 kg/min) approximate |
| Continuous Duty Flow Rate | 3.35 lb/min (1.52 kg/min) |
| Output per Cycle / Cycles per Pound | 1.06 oz (30 g) / 15.1 |
| Pump Air Operation Range | 40 psi to 150 psi (pump rating) |
| Annual Usage Rating | 20,000+ lb (9,072+ kg) |
| Typical Fluid | Grease up to NLGI #2 |
Graco Fire-Ball 425 50:1 Grease Pump, 120 lb Lube Truck Package #223107
The Graco #223107 is the Fire-Ball 425 50:1 lube truck package for 120 lb (55 kg) containers — the truck-mount grease system for mobile service: the pump seats through the drum cover on a follower plate, with a hold-down kit keeping drum and pump stable while the truck is rolling. It arrives as a system under one part number: pump 205394, the 222076 dispense kit, follower plate 223344, drum cover 222060 and hold-down kit 222061.
The Fire-Ball 425 is Graco's large-motor grease pump — a 4.25 in. air motor built for long pipe runs, higher-volume dispensing and multiple simultaneous dispenses. The 50:1 pump delivers up to 7,500 psi of pump fluid working pressure with 9 lb/min free flow and 3.35 lb/min continuous duty, while the complete package works to the included kit 222076's 4,000 psi (276 bar) rating. Note on air: the pump's rated range is 40–150 psi, but the package is held at or below 80 psi — 50:1 × 80 psi is the kit's 4,000 psi system rating, the same package air limit Graco states for its other Fire-Ball 425 50:1 packages.
What the Package Includes
- Fire-Ball 425 50:1 pump 205394 (120 lb container)
- Dispense kit 222076 (4,000 psi): 3/8 in. × 6 ft fluid hose (109163), 6 ft coupled hose (205418), fittings 155470/155494, 1/2 in. × 6 ft air hose
- Follower plate 223344, drum cover 222060, hold-down kit 222061
- Air regulator 104266 and gauge 100960 are specified but must be ordered separately
Not the Right Package If
- You feed from 400 lb (180 kg) drums — the 50:1 400 lb lube truck package is 222075
- You need the 75:1 ratio in a 120 lb lube truck — that is 243817
- The drum sits in a fixed bulk room, not on a truck — the stationary supply package is 225781, or the cover-mount packages 244635/244636
- You dispense from 35/70 lb pails — the horizontal package 244648 is the pail configuration
Questions Shops Ask
Lube truck or stationary — what is the difference?
The lube truck package carries the hold-down kit 222061 that keeps drum, cover and pump stable in mobile service; the stationary packages (like 225781) drop the hold-down because the drum does not move. Same pump, same kit, same 4,000 psi working pressure.
What air supply does it need?
A 1/2 in. NPT(F) inlet. The pump's rated air range is 40–150 psi, but hold the package at or below 80 psi — 50:1 × 80 psi equals the dispense kit's 4,000 psi rating. Order the 104266 regulator with the 100960 gauge separately and use the lowest pressure that gives good delivery.
Is a follower plate really included?
Yes — 223344, with the drum cover 222060. This is a follower-plate package; the side pocket and horizontal packages (244644–244648) are the no-follower-plate configurations.
How does it ship?
A multi-box package by LTL freight. Call (817) 865-3707 for a freight quote before you order.
Why Buy from Alamo
- We sell the lube-truck package as a working system. Pump, follower plate, drum cover and hold-down confirmed against your container before the order goes in.
- We carry the consumables that follow it. Dispense kits, hoses, fittings, follower plates and seals — for the life of the install.
- Freight handled. Multi-box package — call (817) 865-3707 for a freight quote before you order.
Fitment & Setup
This is the 50:1 lube truck configuration for 120 lb (55 kg) containers (pump 205394, hold-down kit 222061). Keep the package at or below 80 psi air; the regulator 104266 with gauge 100960 must be ordered separately. For 400 lb drums use 222075; for stationary bulk rooms use 225781.
Need help matching the right Graco package to your bulk room? Call Alamo Equipment at (817) 865-3707.
Part numbers: 223107
Shipping is quoted by destination before payment. Select your product options and request a freight quote above. We will confirm the freight method and total before sending a payment link.