Graco Fire-Ball 425 50:1 Grease Pump, 400 lb Stationary Supply Package #225781
Graco shipping quote
Shipping is quoted by destination before payment. Select your options, then request your freight quote.
We will confirm the shipping total before sending a payment link.
| Part Number | 225781 |
| Package Type | Fire-Ball 425 50:1 grease pump package — Stationary Supply (400 lb) |
| Ratio | 50:1 |
| Pump Part Number | 205395 (Fire-Ball 425 50:1 pump, 400 lb drums) |
| Package Working Pressure | 4,000 psi (276 bar) — set by the included 222076 dispense kit |
| Maximum Package Air Pressure | 80 psi (0.55 MPa, 5.5 bar) |
| Dispense Kit | 222076 — rated 4,000 psi (276 bar) |
| Fluid Hose | 3/8 in. × 6 ft (hose 109163) |
| Coupled Air Hose | 205418 (6 ft) |
| Fittings | 155470 / 155494 |
| Air Hose | 1/2 in. × 6 ft |
| Air Inlet / Fluid Outlet | 1/2 in. NPT(F) / 3/8 in. NPT(F) |
| Follower Plate | 223846 |
| Drum Cover | 200326 |
| Hold-Down Kit | None — stationary install (no hold-down in this package) |
| Air Regulator | 104266 (1/2 in.) with gauge 100960 — ordered separately |
| Instruction Manual | 307880 |
| Package Weight (approx., shipped) | 76.75 lb |
| UPC | 633955634206 |
| Pump Maximum Fluid Working Pressure | 7,500 psi (517 bar / 51.7 MPa) |
| Air Motor Effective Diameter | 4.25 in. (108 mm) |
| Free Flow Rate @ 100 psi | 9 lb/min (4.1 kg/min) approximate |
| Continuous Duty Flow Rate | 3.35 lb/min (1.52 kg/min) |
| Output per Cycle / Cycles per Pound | 1.06 oz (30 g) / 15.1 |
| Pump Air Operation Range | 40 psi to 150 psi (pump rating) |
| Annual Usage Rating | 20,000+ lb (9,072+ kg) |
| Typical Fluid | Grease up to NLGI #2 |
Graco Fire-Ball 425 50:1 Grease Pump, 400 lb Stationary Supply Package #225781
The Graco #225781 is the Fire-Ball 425 50:1 stationary supply package for 400 lb (180 kg) drums — the fixed bulk-room configuration: the drum sits in place, the pump 205395 cover-mounts through drum cover 200326 on follower plate 223846, and the 222076 dispense kit runs the hose out to the meter. It is the lube truck package's stationary sibling: same pump, same kit, same 4,000 psi working pressure, minus the hold-down hardware because the drum does not ride in a truck.
The Fire-Ball 425 50:1 is the volume choice: 9 lb/min free flow, 3.35 lb/min continuous duty, up to 7,500 psi of pump fluid working pressure and a 4.25 in. air motor for long runs and simultaneous dispenses — annual usage over 20,000 lb. The package works to the kit's 4,000 psi (276 bar) rating. Note on air: the pump's rated range is 40–150 psi, but the package is held at or below 80 psi — the same package air limit Graco states for its other 50:1 Fire-Ball 425 packages.
What the Package Includes
- Fire-Ball 425 50:1 pump 205395 (400 lb drum pump)
- Dispense kit 222076 (4,000 psi): 3/8 in. × 6 ft fluid hose (109163), 6 ft coupled hose (205418), fittings 155470/155494, 1/2 in. × 6 ft air hose
- Follower plate 223846 and drum cover 200326
- Air regulator 104266 and gauge 100960 are specified but must be ordered separately
Not the Right Package If
- The drum rides in a service truck — the 50:1 lube truck package is 222075 (adds hold-down kit 207361)
- You want the 75:1 ratio in a stationary package — the stationary cover-mount 75:1 is 244636, or the RAM package 244906
- You want forced-feed RAM dispensing for extreme-viscosity grease — that is 244905
- You want an inductor-plate system that scrapes the drum clean — that is the topper-inductor package 226018
Questions Shops Ask
Stationary supply versus lube truck — what changes?
Same pump 205395, same kit, same follower plate arrangement. The lube truck package 222075 adds hold-down kit 207361 and drum cover 207366 for mobile service; this package uses drum cover 200326 and skips the hold-down because the drum stays put.
What air supply does it need?
A 1/2 in. NPT(F) inlet. The pump's rated air range is 40–150 psi, but hold the package at or below 80 psi — 50:1 × 80 psi equals the kit's 4,000 psi rating. Order the 104266 regulator with the 100960 gauge separately.
Is a follower plate included?
Yes — 223846, with drum cover 200326: the complete cover-mounted stationary arrangement.
How does it ship?
Multi-box by LTL freight. Call (817) 865-3707 for a freight quote before you order.
Why Buy from Alamo
- We match the package to the room. Stationary supply, cover-mount, RAM or topper-inductor — we confirm the configuration and container before the order goes in.
- We carry what follows it. Dispense kits, hoses, fittings, follower plates and seals for the life of the install.
- Freight handled. Call (817) 865-3707 for a freight quote before you order.
Fitment & Setup
This is the stationary supply configuration for 400 lb drums (pump 205395, follower 223846, drum cover 200326, no hold-down). Keep the package at or below 80 psi air; the regulator 104266 with gauge 100960 must be ordered separately. For mobile service use the lube truck package 222075; for inductor-plate systems use 226018.
Need help matching the right Graco package to your bulk room? Call Alamo Equipment at (817) 865-3707.
Part numbers: 225781
Shipping is quoted by destination before payment. Select your product options and request a freight quote above. We will confirm the freight method and total before sending a payment link.