Graco Fire-Ball 425 10:1 Wall-Mounted Oil Package #244847
Graco shipping quote
Shipping is quoted by destination before payment. Select your options, then request your freight quote.
We will confirm the shipping total before sending a payment link.
| Manufacturer Part Number | 244847 |
| Package Configuration | Wall-mounted |
| Pump Ratio | 10:1 |
| Included Pump | 205626 |
| Hose/Fitting Kit | 222068 |
| Maximum Container Size | Universal |
| Maximum Air Inlet Pressure | 180 psi |
| Maximum Fluid Working Pressure | 1,800 psi |
| Approx. Free Flow @ 100 psi | 11.7 gal/min (44 l/min) |
| Air Connection | 1/2 in NPT(F) |
| Pump Fluid Inlet | 1-1/2 in NPT(F) |
| Pump Fluid Outlet | 3/4 in NPT(F) |
| Air Hose / Fluid Hose | 1/2 in x 18 in / 3/4 in x 18 in |
| Included Accessories | FRL 217072; air shutoff valve 110225; fluid shutoff valve 108537; wall-mount bracket 238245 |
| Required Separately | Thermal relief kit 240429 (per pump manual); low-level cutoff 203688 for metered dispense systems |
Graco Fire-Ball 425 10:1 Wall-Mounted Oil Package #244847
The Graco #244847 is the Fire-Ball 425 10:1 wall-mounted oil pump package: pump 205626, hose/fitting kit 222068, and the complete wall-installation accessory set — filter/regulator/lubricator (217072), air shutoff valve (110225), fluid shutoff valve (108537) and the wall-mount bracket (238245) that holds the pump on the wall instead of the drum. It is a pump-and-connection package, not a complete metered dispensing bay.
What's in the Package — Per the Graco Catalog (p.67)
- Fire-Ball 425 10:1 oil pump, part 205626
- Hose/fitting kit 222068 (1/2 in x 18 in air hose; 3/4 in x 18 in fluid hose)
- Filter, regulator and lubricator (FRL) 217072
- Air shutoff valve 110225 and fluid shutoff valve 108537
- Wall-mount bracket 238245 (mounts directly to the pump flange)
- Instruction manual 309351 (Wall Mount Bulk Oil Transfer Packages)
Questions Shops Ask
Which Fire-Ball 425 ratio do I need — 3:1, 6:1 or 10:1?
Match it to your pipe run and pressure needs. The 10:1 tops out at 1,800 psi fluid working pressure with about 11.7 gal/min at 100 psi (44 l/min) free flow. The 3:1 moves the most oil (28.7 gal/min) at 540 psi; the 10:1 trades flow for 1,800 psi of pressure; the 6:1 sits between at 1,100 psi. If you are unsure, call (817) 865-3707 with your pipe-run length and we will size it.
Does this package need a thermal relief kit?
Yes. The Fire-Ball 425 pump manual lists a thermal relief kit among the required accessories: Graco kit 240429 for this ratio. It protects the pump outlet and downstream piping from pressure spikes when oil heat-soaks in a deadheaded line. We stock the correct kit for this ratio — see the highlighted notice for the Graco order minimum.
What air supply does it need?
40–180 psi of clean, dry air — and never above 180 psi. The package includes the FRL (filter, regulator, lubricator) and air shutoff valve; size your compressor for the pump's air use at your target flow (about 11.7 gal/min at 100 psi (44 l/min) free flow at 100 psi). The pump manual lists a ground wire and air shutoff bleed device among the required accessories.
Why Buy from Alamo
- We confirm the configuration before it ships. Ratio, mount and container matched to your bulk room — not a guess from a photo.
- The line is deep with us. We stock the Fire-Ball 425 family, its thermal relief kits, brackets and dispense-side parts — see the notice on this page for the Graco order minimum.
- Freight handled. These are multi-box packages — call (817) 865-3707 for a quote and lead time before you order.
Fitment & Setup
Wall-mounting is the point of this package: the included bracket 238245 bolts directly to the pump flange, so choose a wall that carries the pump, hoses and piping loads per the manual. Air supply 40–180 psi through the included FRL; never exceed 180 psi. The pump manual lists four required accessories — an air shut-off bleed device, a fluid drain valve, a thermal relief kit (240429) and a ground wire — a thermal relief kit is required on the Fire-Ball 425 per the pump manual (Graco kit 240429, 1,600 psi relief for the 6:1/10:1). For metered dispense systems, order the low-level cutoff 203688 separately per the catalog footnote.
Need help matching a Graco part to your setup? Call Alamo Equipment at (817) 865-3707.
Part numbers: 244847
Shipping is quoted by destination before payment. Select your product options and request a freight quote above. We will confirm the freight method and total before sending a payment link.