Graco SDM8 Electronic Manual Oil Meter, Flexible, 1/2" NPT #25M406

SKU: ALMGRA25M406
(0)
Regular price $1,000.00
Available to order
Usually ships between 1 and 3 business days.
Manuals & Resources
Fit or setup questions before ordering? Call Alamo at (817) 865-3707 — we confirm inlet size, nozzle, and pump compatibility.
Quick Specs
Part Number 25M406
Series Graco SDM8 Series electronic meter
Dispense Type Manual (operator-controlled handle)
Extension Flexible
Fluid Service Oil — crankcase oil, ATF, gear oil (petroleum- and synthetic-based)
Flow Range 0.25–8 gpm (0.9–30 lpm), tested in 10W motor oil
Fluid Inlet 1/2 in–14 NPT
Outlet 3/4 in–16 straight thread O-ring boss
Maximum Working Pressure 1,500 psi (103.4 bar)
Metered Dispense Accuracy ±0.5% (at 2.5 gpm, 70°F, 10-weight oil, 1 gal dispensed; may require calibration)
Units of Measure Pints, quarts, gallons, liters (factory set to quarts)
Maximum Recorded Dispense 9,999 units
Operating Temperature 4°F to 158°F (−16°C to 70°C)
Dimensions (without extension) 13 in × 3.75 in × 5.75 in (33 × 9.5 × 14.6 cm)
Weight 5.3 lb (2.4 kg)
Wetted Parts Aluminum, stainless steel, PBT, nitrile rubber, zinc-plated and nickel-plated carbon steel
Battery 4 AA alkaline (Energizer E91 recommended)
Warranty 5-year meter/valve warranty: 5-year structural, 3-year electronics, 1-year wear parts
Nozzle Automatic quick-close oil nozzle (replacement part 17R220)

Graco SDM8 Electronic Manual Oil Meter, Flexible, 1/2" NPT #25M406

The Graco #25M406 is the SDM8 oil meter for bays where the fill neck is not in a straight line from the hose: its flexible extension bends to reach oil fills tucked behind harnesses, under covers or deep in the engine bay on lifted trucks. Quick-service bays and mobile oil rigs use it to meter bulk oil — the display counts fluid dispensed while flow stays at the handle.

Display counts in pints, quarts, gallons or liters (factory-set to quarts) with a maximum recorded dispense of 9,999 units. A single set of four AA alkaline batteries powers the meter (Energizer E91 recommended).

Where It Fits

  • Threads onto a standard 1/2 in. NPT bulk oil hose
  • The outlet is a 3/4 in–16 straight-thread O-ring boss that accepts SD-series nozzle assemblies — this configuration ships with the automatic quick-close oil nozzle (replacement part 17R220)
  • Rated for petroleum- and synthetic-based crankcase oil, ATF and gear oils (antifreeze and windshield-wash service are on other SD-series models)
  • The flexible extension is replaceable (part 16Y863) per the SD-series repair manual — useful when a bay takes a beating

Fitment & Setup

This is the flexible-extension, oil-service SDM8. For antifreeze dispense, Graco's SDM8 antifreeze models (25M405 rigid / 25M407 flexible) run the antifreeze nozzle at 8 gpm. If your dispense points are all straight-line drops, the rigid 25M404 is the simpler setup. Confirm your inlet size (1/2 in. NPT) before ordering.

Questions Shops Ask

How accurate is it?
Graco rates SD-series dispense accuracy at ±0.5% — tested at 2.5 gpm, 70°F, with 10-weight oil and 1 gallon dispensed. Flow rates are tested in 10W motor oil and vary with fluid pressure, temperature and viscosity; the meter can be calibrated to your fluid and pressure.

Does it read in liters?
Yes — pints, quarts, gallons or liters, factory-set to quarts. It records up to 9,999 units dispensed.

Will it survive the bay?
Wetted parts are aluminum, stainless steel, PBT and nitrile rubber with zinc- and nickel-plated carbon steel. Warranty is 5 years on structural components, 3 years on electronics, and 1 year on wear parts (o-rings, seals, valves).

Why Buy from Alamo

  • We stock the service parts that keep a meter in service — nozzles, extensions, swivel/filter kits and O-rings covered in the SD-series repair manual — so a dropped nozzle does not shut down a stall.
  • We confirm your hose, inlet size and fluid list before the order ships, so the meter threads onto what is already on your wall.
  • Call (817) 865-3707 and we will match the right SD-series meter to your bulk room.

Need help matching the right Graco meter to your bulk room? Call Alamo Equipment at (817) 865-3707.

Part numbers: 25M406

 

Shipping follows the method shown on the product page and at checkout. Standard parcel, calculated LTL, freight quotes, included freight, and pickup may apply by item.

UPS shipping cutoff: order before 11:30 AM ET and your order ships the same business day; later orders ship the next business day. Delivery options and estimated arrival dates for your address are shown at checkout.