Graco Fire-Ball 300 50:1 120 lb Package - Flex Nozzle #26C185

SKU: ALMGRA26C185
(0)
Regular price $3,100.00
Available to order
Shipping timing is confirmed after order review.

Graco shipping quote

Shipping is quoted by destination before payment. Select your options, then request your freight quote.

Call (817) 865-3707

We will confirm the shipping total before sending a payment link.

Manuals & Resources
Configuration questions before ordering? Call Alamo Equipment at (817) 865-3707 — we confirm the fit before the order ships.
Quick Specs
Part number 26C185
Type Fire-Ball 300 50:1 120 lb package, portable with caster base, flex nozzle
Ratio 50:1
Container class 120 lb (55 kg)
Pump 239887 - Fire-Ball 300 50:1
Dispense kit / hose 26C183 - 1/4 in x 12 ft fluid hose 109151
Dispense hardware Flex dispenser 26C184; Z-Swivel 202577; air coupler 114558; air fitting 169971
Follower plate / cover 24F902 / 24R350
Portable base 203622 - caster base
Holster 203976
Air regulator 3/8 in (9.5 mm) 109075 - ordered separately
Instruction manual 307878

Graco Fire-Ball 300 50:1 120 lb Package - Flex Nozzle #26C185

The 26C185 is Graco's Fire-Ball 300 50:1 120 lb grease package with the flex-nozzle dispenser on the caster base - the full-drum chassis-lube station built around the flexible 12 in hose-nozzle grease valve. Per Graco’s 120 lb grease pump packages table (catalog 303245EN, p.133), it is the portable-with-caster-base flex column: Fire-Ball 300 50:1 pump 239887, dispense kit 26C183 with its 1/4 in x 12 ft hose (part number 109151), Z-Swivel 202577 and flex grease valve (part number 26C184), follower plate 24F902, drum cover 24R350, holster 203976 and caster base 203622.

Who this is built for

This package is built for the tech who greases past fittings that a rigid nozzle cannot reach: U-joints buried above the driveshaft, chassis fittings behind suspension arms, the zerk that only angles in from below. The 26C184 is Graco's flex dispenser - the non-metered grease valve package that pairs the bare valve 242055 with a coupler and a 12 in whip hose - and this column hangs it on the 50:1 120 lb drum station with the same pump, plate and cover as the standard columns.

What the package includes

Per the 50:1 120 lb packages table (p.133), the 26C185 column includes: Fire-Ball 300 50:1 pump 239887; dispense kit 26C183; 1/4 in x 12 ft fluid hose, part number 109151; air coupler 114558; air fitting 169971; Z-Swivel 202577; flex dispenser 26C184; follower plate 24F902; drum cover 24R350; holster 203976; caster base 203622; instruction manual 307878. the table's footnote requires a 3/8 in (9.5 mm) air regulator (109075), ordered separately - the package does not include one. Drum, grease and compressed air are yours to bring.

Will it fit your shop?

Compatibility is by container class and hardware: 120 lb (55 kg) drums, with the follower plate 24F902 and LD cover 24R350 matched to that class, sitting on the 203622 caster base. Site prep is a compressed-air source with the separately ordered 3/8 in regulator in the line, floor the casters can roll on, and 120 lb drums of grease up to NLGI #2. Within this table the 26C186 is the identical column on the 203650 two-wheel cart - that one differing cell is the whole difference; and the Pro-Shot columns 225006 (caster) and 225026 (cart, both already in our catalog) carry the standard 242056 dispenser instead of the flex 26C184.

Not the right package if

You prefer the standard Pro-Shot dispenser - the 225006 is the same caster-base column with the 242056. You want wheels instead of casters - the 26C186 is the flex column on the 2-wheel cart. You need the Accu-Shot metered side - the 245696 is the metered cart column in this table. You run 400 lb drums - the 50:1 400 lb packages table (p.134) is that family.

Common questions

What is the flex advantage?
The 26C184 dispenser works the grease through a flexible 12 in hose nozzle instead of a rigid extension - the reach-around fitting that kills rigid nozzles is its home ground. The pump, plate, cover, hose and base in this column are the standard 120 lb story; the flex side is the difference.

What separates this from the 26C186?
One cell: this column carries the 203622 caster base, the 26C186 carries the 203650 two-wheel cart. Everything else in the two columns is identical - pump, kit 26C183, flex 26C184, plate 24F902, cover 24R350, holster and manual.

Do I need to buy anything else to run it?
The air regulator 109075 is the one the table footnote requires separately - order it with the package. Drum, grease and compressed air are yours.

Why buy it from Alamo

Flex-nozzle access is the difference between greasing a fitting and skipping it - and this column is the complete factory flex arrangement on the rolling 120 lb station, not a valve you have to piece together later. We stock the wear parts as separate lines: hose 109151, Z-Swivel 202577, follower plate 24F902, LD cover 24R350 and the flex 26C184. Call (817) 865-3707 and we will confirm the column configuration before you order.

Part numbers: 26C185

Shipping is quoted by destination before payment. Select your product options and request a freight quote above. We will confirm the freight method and total before sending a payment link.