Mahle ShopPRO CSJ-3 Service Jack 3 Ton #485-80022-00
| Model / Part Number | 485-80022-00 |
| Product Type | Hydraulic Service Jack |
| Capacity | 6,000 lbs (3 tons) |
Mahle CSJ-3 — Hydraulic Service Jack
Passenger vehicles and light-duty trucks with low ground clearance need a jack that can actually get under them, and a jack with too high a starting profile forces techs to jockey the vehicle onto ramps first just to get the jack in position.
The CSJ-3 is a low-profile, 3-ton (6,000 lb) hydraulic floor jack built for easy access under low-clearance vehicles, with a 4.25" starting height and 19.5" of lift distance. Large front wheels and rear swivel casters improve maneuverability, and a long handle design gives techs better leverage for smooth, controlled lifting in busy general-service workshops.
Who the CSJ-3 Is Built For
- ✅ A general repair shop running daily oil changes and tire rotations on lowered sedans and sport compacts needs a jack that actually slides under a 4.25" clearance without ramps first
- ✅ A shop that's had a tech waste time jockeying a vehicle onto blocks just to get a taller jack underneath wants a low-profile design that skips that extra step entirely
- ✅ A tire shop turning cars quickly all day benefits from smooth hydraulic lifting and a long handle that doesn't tire out a tech's arm by the tenth vehicle
- ✅ A single-bay independent garage on a tight footprint needs large front wheels and rear casters to reposition the jack around a crowded shop floor
- ✅ A shop mostly seeing passenger vehicles and light trucks doesn't need to pay for a heavier-duty jack rated well past what it actually services
What the CSJ-3 Is NOT Built For
- ❌ Vehicles or loads exceeding the 3-ton (6,000 lb) capacity rating
- ❌ Commercial or heavy-duty vehicle service — step up to the CSJ-6A or CSJ-10A
What Makes the CSJ-3 Different
Low Profile Design
A 4.25" starting height provides easy access under low-clearance vehicles without ramps.
Hydraulic Lifting System
Ensures smooth and controlled lifting operation throughout the 19.5" lift distance.
Large Front Wheels & Rear Swivel Casters
Enhances maneuverability and positioning in busy shop environments.
- A general repair shop running daily oil changes and tire rotations on lowered sedans and sport compacts needs a jack that actually slides under a 4.25" clearance without ramps first
- A shop that's had a tech waste time jockeying a vehicle onto blocks just to get a taller jack underneath wants a low-profile design that skips that extra step entirely
- A tire shop turning cars quickly all day benefits from smooth hydraulic lifting and a long handle that doesn't tire out a tech's arm by the tenth vehicle
- Vehicles or loads exceeding the 3-ton (6,000 lb) capacity rating
- Commercial or heavy-duty vehicle service — step up to the CSJ-6A or CSJ-10A
Is the CSJ-3 the Right Jack for Your Shop?
| Capacity | 6,000 lbs (3 tons) |
| Minimum Start Height | 4.25" |
| Power Type | Manual hydraulic |
| Lift Distance | 19.5" |
Choose the CSJ-3 for general automotive service on passenger vehicles and light-duty trucks where a low-profile hydraulic jack gets the job done.
Have questions about whether the CSJ-3 fits your specific job? Call (844) 480-6059.
Full Specifications — CSJ-3
| Part Number | 485-80022-00 |
| Minimum Start Height | 4.25" |
| Maximum Lift Height | 23.75" |
| Lift Distance | 19.5" |
| Handle Length | 45" |
| Mobility | Large front wheels + rear swivel casters |
| Construction | Heavy-duty steel |
⚠️ Setup Requirements
- Weight: confirm your dock/receiving area and shop floor can handle this unit’s shipping weight before delivery.
- Setup: This is freestanding shop equipment — no fixed bay installation required. Call (844) 480-6059 if you have questions about setup or positioning.
Mahle Warranty — CSJ-3
Warranty coverage for the CSJ-3 has not been independently verified from an official Mahle source at this time. Call Alamo at (844) 480-6059 to confirm the current warranty terms before you order.
Frequently Asked Questions — Mahle CSJ-3
Why Buy the CSJ-3 from Alamo Equipment & Service?
- Installation available. This is freestanding equipment — no bay install needed, but call (844) 480-6059 if you have questions about setup or fit.
- We service it. Call (844) 480-6059 for maintenance, repairs, or support — and if you ever need warranty work, we register your equipment with the manufacturer and handle the claim directly, so you’re not stuck navigating vendor support on your own.
- We size it with you. 3-ton (6,000 lb) capacity with a low 4.25" starting height — call and we'll confirm it fits your typical service vehicles.
- Ships by freight. Your exact freight cost is calculated at checkout when you enter your ZIP.
A shop buying from a pure e-commerce retailer gets a box. A shop buying from Alamo gets a partner.
Shipping follows the method shown on the product page and at checkout. Standard parcel, calculated LTL, freight quotes, included freight, and pickup may apply by item.