Mahle ShopPRO CSP-10 Shop Press #485-80058-00, 485-80059-00
| Model / Part Number | Standard — 485-80058-00 Air Assist — 485-80059-00 |
| Product Type | Floor-Standing Shop Press |
| Capacity | 10 tons (20,000 lbs) |
Mahle CSP-10 Series — Floor-Standing Shop Press
Pressing bearings, gears, and bushings on a workbench limits the size of the job a shop can take on, and a compact bench press runs out of working area fast once a component doesn't fit the smaller footprint.
The CSP-10 steps up to a floor-standing design with a larger working area than a bench press, rated to 10 tons (20,000 lbs). Standard and Air Assist configurations — each its own SKU — let a shop choose manual hydraulic operation or an air-powered system that reduces pumping effort on higher-volume pressing work.
Who the CSP-10 Series Is Built For
- ✅ A general repair shop that's outgrown its bench press on larger components needs the CSP-10's bigger working area without jumping straight to a 25-ton unit
- ✅ A shop doing occasional pressing work throughout the week is well served by the Standard configuration's manual hydraulic operation without paying for air assist it won't use often
- ✅ A high-volume driveline or bearing shop pressing components dozens of times a day wants the Air Assist configuration to cut down on the physical toll of manual pumping
- ✅ A shop with adjustable bed-height needs across varying workpiece sizes wants a floor-standing press instead of forcing every job onto a fixed bench setup
- ✅ A shop that's had a smaller bench press struggle or bottom out on a stubborn bearing wants documented 10-ton capacity to handle that job with margin
What the CSP-10 Series Is NOT Built For
- ❌ Extreme-duty pressing beyond 10 tons — step up to the CSP-25 or CSP-75
- ❌ Small, occasional jobs where a compact bench press is a better footprint and cost match
What Makes the CSP-10 Series Different
Floor-Standing Design
Provides a larger working area than a bench press, giving more flexibility for varied component sizes.
Adjustable Bed Height
Accommodates various workpiece sizes on the same press.
Two Power Configurations
Standard (manual hydraulic) and Air Assist — each its own SKU — match the press to your shop's pressing volume.
- A general repair shop that's outgrown its bench press on larger components needs the CSP-10's bigger working area without jumping straight to a 25-ton unit
- A shop doing occasional pressing work throughout the week is well served by the Standard configuration's manual hydraulic operation without paying for air assist it won't use often
- A high-volume driveline or bearing shop pressing components dozens of times a day wants the Air Assist configuration to cut down on the physical toll of manual pumping
- Extreme-duty pressing beyond 10 tons — step up to the CSP-25 or CSP-75
- Small, occasional jobs where a compact bench press is a better footprint and cost match
Is the CSP-10 the Right Shop Press for Your Shop?
| Capacity | 10 tons (20,000 lbs) |
| Configurations | Standard (manual) / Air Assist — each its own SKU |
| Cylinder Stroke | 10" |
| Dimensions | 25.1" W x 28" D |
Choose the CSP-10 for general shop pressing of bearings, gears, and bushings, and pick Standard or Air Assist based on how often your shop presses parts. Have questions about whether the CSP-10 Series fits your specific job? Call (844) 480-6059.
Full Specifications — CSP-10 Series
| Available Configurations & Part Numbers | Standard — 485-80058-00 Air Assist — 485-80059-00 |
| Cylinder Stroke | 10" |
| Dimensions | 25.1" W x 28" D |
| Weight | 180 lbs |
⚠️ Setup Requirements
- Weight: confirm your dock/receiving area and shop floor can handle this unit’s shipping weight before delivery.
- Setup: This is freestanding shop equipment — no fixed bay installation required. Call (844) 480-6059 if you have questions about setup or positioning.
Mahle Warranty — CSP-10 Series
Warranty coverage for the CSP-10 Series has not been independently verified from an official Mahle source at this time. Call Alamo at (844) 480-6059 to confirm the current warranty terms before you order.
Frequently Asked Questions — Mahle CSP-10 Series
Why Buy the CSP-10 Series from Alamo Equipment & Service?
- Installation available. This is freestanding equipment — no bay install needed, but call (844) 480-6059 if you have questions about setup or fit.
- We service it. Call (844) 480-6059 for maintenance, repairs, or support — and if you ever need warranty work, we register your equipment with the manufacturer and handle the claim directly, so you’re not stuck navigating vendor support on your own.
- We size it with you. 10-ton (20,000 lb) capacity in Standard or Air Assist configurations — call and we'll help confirm it fits your typical pressing jobs.
- Free shipping. This item ships free.
A shop buying from a pure e-commerce retailer gets a box. A shop buying from Alamo gets a partner.
- Free shipping on all parts within the continental United States.
- Most orders ship within 24–48 hours.
- Tracking information will be emailed once your order ships.