Mahle ShopPRO CSP-25 Shop Press #485-80062-00, 485-80063-00
| Model / Part Number | Standard — 485-80062-00 Air Assist — 485-80063-00 |
| Product Type | Heavy-Duty Shop Press |
| Capacity | 25 tons (50,000 lbs) |
Mahle CSP-25 Series — Heavy-Duty Shop Press
Heavy-duty pressing jobs — larger bearings, driveline components, high-force fits — push past what a 10-ton press can handle, and forcing that work through an undersized unit risks a failed press or a damaged component.
The CSP-25 steps up to 25 tons (50,000 lbs) with a robust frame built for high-load applications. Standard and Air Assist configurations — each its own SKU — give a shop the choice between manual hydraulic operation and an air/hydraulic system that reduces operator fatigue on frequent heavy-duty jobs.
Who the CSP-25 Series Is Built For
- ✅ A shop that's outgrown a 10-ton press on heavier driveline or industrial components needs the CSP-25's 25-ton capacity to handle the work without straining
- ✅ A shop pressing high-force fits only occasionally is well served by the Standard configuration's manual hydraulic operation at a lower cost than Air Assist
- ✅ A high-volume industrial or fleet shop running heavy-duty pressing jobs daily wants the Air Assist configuration to reduce fatigue over repeated high-force presses
- ✅ A shop handling larger components that need the adjustable work bed's flexibility across varying sizes benefits from the CSP-25's bigger footprint over a smaller press
- ✅ A shop that's had a lighter press strain or fail under a demanding job wants the confidence of a frame built specifically for 25-ton work
What the CSP-25 Series Is NOT Built For
- ❌ Light to medium-duty pressing where the CSP-10 is a better cost and footprint match
- ❌ Extreme industrial pressing beyond 25 tons — step up to the CSP-75
What Makes the CSP-25 Series Different
25-Ton Heavy-Duty Frame
Handles heavy-duty pressing tasks beyond a lighter press's rated capacity.
Adjustable Work Bed
Supports a wide range of component sizes on the same press.
Two Power Configurations
Standard (manual hydraulic) and Air Assist — each its own SKU — match the press to your shop's demanding-job frequency.
- A shop that's outgrown a 10-ton press on heavier driveline or industrial components needs the CSP-25's 25-ton capacity to handle the work without straining
- A shop pressing high-force fits only occasionally is well served by the Standard configuration's manual hydraulic operation at a lower cost than Air Assist
- A high-volume industrial or fleet shop running heavy-duty pressing jobs daily wants the Air Assist configuration to reduce fatigue over repeated high-force presses
- Light to medium-duty pressing where the CSP-10 is a better cost and footprint match
- Extreme industrial pressing beyond 25 tons — step up to the CSP-75
Is the CSP-25 the Right Shop Press for Your Shop?
| Capacity | 25 tons (50,000 lbs) |
| Configurations | Standard (manual) / Air Assist — each its own SKU |
| Cylinder Stroke | 6.3" |
| Dimensions | 40.5" W x 70.4" D |
Choose the CSP-25 for heavy-duty pressing beyond a 10-ton unit's capacity, and pick Standard or Air Assist based on how often your shop runs high-force jobs. Have questions about whether the CSP-25 Series fits your specific job? Call (817) 865-3707.
Full Specifications — CSP-25 Series
| Available Configurations & Part Numbers | Standard — 485-80062-00 Air Assist — 485-80063-00 |
| Cylinder Stroke | 6.3" |
| Dimensions | 40.5" W x 70.4" D |
| Weight | 510 lbs |
⚠️ Setup Requirements
- Weight: confirm your dock/receiving area and shop floor can handle this unit’s shipping weight before delivery.
- Setup: This is freestanding shop equipment — no fixed bay installation required. Call (817) 865-3707 if you have questions about setup or positioning.
Mahle Warranty — CSP-25 Series
Warranty coverage for the CSP-25 Series has not been independently verified from an official Mahle source at this time. Call Alamo at (817) 865-3707 to confirm the current warranty terms before you order.
Frequently Asked Questions — Mahle CSP-25 Series
Why Buy the CSP-25 Series from Alamo Equipment & Service?
- Installation available. This is freestanding equipment — no bay install needed, but call (817) 865-3707 if you have questions about setup or fit.
- We service it. Call (817) 865-3707 for maintenance, repairs, or support — and if you ever need warranty work, we register your equipment with the manufacturer and handle the claim directly, so you’re not stuck navigating vendor support on your own.
- We size it with you. 25-ton (50,000 lb) capacity in Standard or Air Assist configurations — call and we'll help confirm it covers your heaviest pressing jobs.
- Ships by freight. The available method and price are shown at checkout.
A shop buying from a pure e-commerce retailer gets a box. A shop buying from Alamo gets a partner.
Shipping follows the method shown on the product page and at checkout. Standard parcel, calculated LTL, freight quotes, included freight, and pickup may apply by item.