Mahle ShopPRO MLT-2200 Multi-Use Lift Table #485-80188-01
| Model | MLT-2200 |
| Product Line | MAHLE ShopPRO |
| Dimensions (L x W x H) | 60" x 38" x 48" |
| Weight | 715 lbs |
| Lifting Capacity | 2,200 lbs (1,000 kg) |
| Table Top Dimensions | 59" x 31" (149.8 x 78.7 cm) |
| Base Footprint | 65" x 34" (165.1 x 86.3 cm) |
| Lift Range | 20" – 68" (50.8 – 172.7 cm) |
| Fixture Height Adjustment | +7" to 11.5" (17.7 – 29.2 cm) |
| Lift Mechanism | Air-over-hydraulic |
| Caster Diameter | 6" (15.2 cm) |
| Country of Origin | China |
| Warranty | MAHLE Service Solutions (MSS) 2-Year Limited Warranty — Year 1 Full, Year 2 Parts Only |
Mahle ShopPRO MLT-2200 Multi-Use Lift Table #485-80188-01
Component work at the wrong height slows a job down and puts a tech in an awkward, unsafe position — especially when you're improvising with stands and blocks instead of using equipment built for adjustable height. The Mahle ShopPRO MLT-2200 is built to solve that: a 2,200 lb air-over-hydraulic lift table with a 20"-68" height range and additional fixture-level adjustment for fine-tuning.
The MLT-2200 runs on shop air rather than a dedicated electric power unit, rolls on 6" casters, and gives you 59" x 31" of table-top working space. Call Alamo at (844) 480-6059 to confirm your shop's compressed-air supply before you order.
Who the MLT-2200 Is Built For
- The shop that's been improvising with engine stands and floor jacks to position components at a workable height, risking instability on jobs that need real fixture adjustment
- The multi-bay shop that wants one mobile table to roll wherever a component job comes up, instead of a fixed bench tied to one bay
- The tech who needs to fine-tune working height by a few inches mid-job — the +7" to 11.5" fixture adjustment covers that without re-jacking the whole table
- The shop that already runs compressed air to every bay and wants equipment that uses that existing infrastructure instead of adding another electrical circuit
- The buyer handling a range of component sizes on the same table — the 20"-68" lift range covers low-profile and near-standing-height work without a second table
What the MLT-2200 Is NOT Built For
- ❌ Shops without a shop-air supply — the lift mechanism is air-over-hydraulic and needs compressed air to operate
- ❌ Components heavier than 2,200 lbs — a higher-capacity table is the right tool at that weight
- ❌ Shops needing a fixed vehicle lift — this is a multi-use component table, not a 2-post or 4-post lift
What Makes the MLT-2200 Different
Air-Over-Hydraulic Lift
Shop air drives the hydraulic lift mechanism for smooth, controlled raising and lowering without a dedicated electric power unit.
Fixture Height Adjustment
An additional 7" to 11.5" of fixture-level adjustment lets you fine-tune working height beyond the base lift range.
Wide Lift Range
Table height adjusts from 20" to 68", covering low-profile component work through near-standing-height tasks on the same table.
Mobile Caster Base
6" casters on a 65" x 34" footprint let one table move between bays instead of sitting fixed in a single spot.
Multi-Use Platform Design
A 59" x 31" table top handles a range of shop components and assemblies beyond a single dedicated task.
- ✅ Shops needing a mobile, height-adjustable table for component and assembly work across multiple bays
- ✅ Buyers with shop air already available to run an air-over-hydraulic lift mechanism
- ✅ General service work needing fine height adjustment beyond a fixed-height table
- ❌ Shops without a shop-air supply — the lift mechanism is air-over-hydraulic and needs compressed air to operate
- ❌ Components heavier than 2,200 lbs — a higher-capacity table is the right tool at that weight
- ❌ Shops needing a fixed vehicle lift — this is a multi-use component table, not a 2-post or 4-post lift
Is the MLT-2200 Right for Your Shop?
The MLT-2200 doesn’t have a direct sibling in this batch to compare it against — it’s a general-purpose mobile lift table rather than a vehicle lift. If you’re deciding whether a dedicated component table fits your shop’s workflow, call (844) 480-6059 and we’ll help you compare it to what you’re using today.
Full Specifications — MLT-2200
| Model | MLT-2200 |
| Product Line | MAHLE ShopPRO |
| Dimensions (L x W x H) | 60" x 38" x 48" |
| Weight | 715 lbs |
| Lifting Capacity | 2,200 lbs (1,000 kg) |
| Table Top Dimensions | 59" x 31" (149.8 x 78.7 cm) |
| Base Footprint | 65" x 34" (165.1 x 86.3 cm) |
| Lift Range | 20" – 68" (50.8 – 172.7 cm) |
| Fixture Height Adjustment | +7" to 11.5" (17.7 – 29.2 cm) |
| Lift Mechanism | Air-over-hydraulic |
| Caster Diameter | 6" (15.2 cm) |
| Country of Origin | China |
| Warranty | MAHLE Service Solutions (MSS) 2-Year Limited Warranty — Year 1 Full, Year 2 Parts Only |
⚠️ Installation Requirements
- Electrical: Confirm your table's power requirement; consult an electrician for exact breaker sizing.
- Floor space: This is a portable table — confirm clear floor space for the unit's footprint plus technician clearance on all working sides. No fixed bay dimensions or concrete anchoring required.
- Air supply (if applicable): Confirm your shop's compressed-air system is compatible if this model uses an air-over-hydraulic lift mechanism.
- Setup help: Call (844) 480-6059 with any setup or first-use questions.
Mahle Warranty — MLT-2200
Mahle backs the MLT-2200 with the following coverage terms.
| Component | Coverage Term |
|---|---|
| Parts & non-overtime labor | Year 1 — full coverage for defects in material/workmanship |
| Parts only | Year 2 — parts coverage continues, labor no longer included |
| MSS-supplied spare/replacement parts | 90-day limited warranty on the part itself |
| Registration requirement | Must register with MAHLE Service Solutions (MSS) within 90 days of delivery — unregistered units are excluded from coverage |
Warranty service is through Alamo Equipment & Service. When you buy from us, you are not waiting on a manufacturer hotline — call (844) 480-6059 and we handle it. Confirm exact terms at the time of purchase.
Frequently Asked Questions — Mahle MLT-2200
Why Buy the MLT-2200 from Alamo Equipment & Service?
- We deliver and set it up. Our team sizes the MLT-2200 to your bay and handles the physical install — you don't coordinate a separate rigging or electrical crew.
- We service it. When something needs attention after the sale, we're the same people you call — not a national warranty line.
- We help you pick the right unit. At 2,200 lbs (1,000 kg) rated capacity and $7,719.54, we'll confirm the MLT-2200 genuinely matches your typical vehicle mix before you buy.
- Free shipping. Delivered to your shop, no hidden freight fees.
- Expert comparison help. Not sure if this is the right model for your shop? Call (844) 480-6059 — we'll walk you through it.
A shop buying from a pure e-commerce retailer gets a box. A shop buying from Alamo gets a partner.
- Free shipping on all parts within the continental United States.
- Most orders ship within 24–48 hours.
- Tracking information will be emailed once your order ships.