Stratus Extra Wide 10k lbs Single Point Manual Release 2-Post Lift #SAE-F10X

Stratus SAE-F10X — 10,000 lbs 2-Post Lift

A low ceiling rules out most 10,000 lb overhead 2-post lifts before a shop even gets to compare features — those designs typically need 12 to 13 feet of clearance. The Stratus SAE-F10X is built for the shop that doesn't have that clearance: a floor-plate 10K lift with a 112" overall height that fits a 10-foot ceiling, and an extra-wide drive-thru that makes pulling in full-size trucks and SUVs easier than narrower floor-plate alternatives.

The SAE-F10X's floor plate routes the synchronization cable across the floor between the column bases — the structural trade-off that keeps the column height low enough for a 10-foot bay. Single-point manual release keeps operation straightforward, and the included 4-piece truck adapter set extends the lift's reach for taller vehicles. Stratus backs it with a 5-year structural, 3-year hydraulic, 2-year electrical warranty. Call Alamo at (844) 480-6059 to confirm your ceiling clearance before ordering.

Who the SAE-F10X Is Built For

• The shop with a 10-to-11-foot ceiling that's been told a standard overhead 2-post won't fit — the SAE-F10X's 112" overall height is the path to 10,000 lb capacity in that bay
• Technicians who need the widest practical drive-thru in a floor-plate design for full-size trucks and SUVs that need extra clearance pulling in
• Home garage owners and light commercial shops on a defined equipment budget who understand the floor-plate cable trade-off and need the low-ceiling compatibility more than a completely clear floor
• Shops upgrading from a narrower floor-plate lift where drive-thru width was a recurring frustration on wider vehicles
• Buyers who want Stratus's 5-year structural warranty applied to a floor-plate platform rather than settling for a shorter-term alternative

What the SAE-F10X Is NOT Built For

• ❌ Shops with 13-foot or greater ceiling clearance — an overhead clearfloor 2-post provides better floor access and is worth the extra height in those bays
• ❌ Shops requiring ALI/ETL certification — the SAE-F10X is not ALI listed
• ❌ Bays where a completely clear floor between columns is operationally required — the floor plate occupies space between the bases

Questions about fit or capacity? Call Alamo at (844) 480-6059.

What Makes the SAE-F10X Different

Low-Ceiling 10,000 lb Platform — 112" Overall Height

The SAE-F10X's defining spec is its 112" (9' 4") overall column height — low enough to install cleanly under a 10-foot ceiling, where standard overhead 2-post designs at this capacity require 12 to 13 feet of clearance. The floor plate design, which routes the synchronization cable between the column bases rather than through an overhead bar, is what enables that reduced column profile.

Extra-Wide Drive-Thru — 106 5/16"

For a floor-plate lift, the SAE-F10X's 106 5/16" drive-thru clearance is wider than several comparable low-ceiling alternatives. That extra width matters most for shops that regularly service full-size trucks, dually pickups, and wide SUVs — vehicles where a narrower drive-thru turns every pull-in into a slow, careful approach.

Open-Top Floor Plate Design

The SAE-F10X's floor plate uses an open-top configuration — the base plate connects the columns at floor level, and vehicles drive over or around it during approach. This is the structural trade-off for shops in low-ceiling bays: a floor-level cable run in exchange for column height that fits under a 10-foot ceiling.

Single-Point Manual Release with Top Limiter Switch

The SAE-F10X's single-point manual release simplifies the lowering procedure to one control location. A top limiter switch stops cylinder travel at the safe working height, protecting the hydraulic system from over-extension. The structure and hydraulic system are proofed by dynamic testing at 115% of rated capacity and static testing at 150%.

Stratus 5/3/2-Year Warranty

Stratus backs the SAE-F10X with a 5-year structural components warranty, 3-year hydraulic components warranty, and 2-year electrical parts warranty. On a low-ceiling floor-plate platform, that structural term is a meaningful differentiator versus shorter-warranty alternatives in the same category. Alamo handles warranty service directly — call (844) 480-6059.

Full Specifications — SAE-F10X

Stratus Warranty — SAE-F10X

Stratus backs the SAE-F10X with a 5-year structural components warranty, 3-year hydraulic components warranty, and 2-year electrical parts warranty. This warranty applies to the full Stratus SAE 2-post lineup.

Warranty service is through Alamo Equipment & Service. When you buy from us, you are not waiting on a manufacturer hotline — call (844) 480-6059 and we handle it.