Stratus Extra Wide 14k lbs Single Point Manual Release 2-Post Lift #SAE-F14X

Stratus SAE-F14X — 14,000 lbs 2-Post Lift

You found a lift you like, you've got the budget, and then you walk into the bay with a tape measure and your stomach drops — the ceiling is too low for an overhead lift, and the 14,000 lb capacity you need usually comes bolted to towers that punch right into your trusses. Low-ceiling bays are where heavy-capacity lift shopping goes to die. Either you settle for less capacity than your truck and fleet work demands, or you start pricing out the cost of raising a roofline that was never built to come up.

The Stratus SAE-F14X solves that bind by going the other direction: it's a 14,000 lb two-post lift with a baseplate that runs the equalization cables across the floor instead of over your head, and an overall height of just 122 13/16". That's a hair over ten feet to the top of the columns — it slides into bays that an overhead 14k lift can't touch. On top of that it carries an extra-wide column spread, so the wide-track trucks, duallys, and work vans that fight a standard lift drive in and clear the posts. Inside the columns runs 129 15/16" with a 116 1/8" drive-thru, it's powered by a 4 HP 220V 30A motor, and every release valve drops on one handle through single-point manual lock release. The only trade-off is the cable channel across the floor — and for a shop that's choosing between this and not having a 14k lift at all, that's an easy line to step over.

Who the SAE-F14X Is Built For

• You run a truck and fleet shop in a building with low ceilings — a converted retail space, an older block garage, a unit with HVAC ducting overhead — and every 14,000 lb lift you've priced wants more vertical clearance than you'll ever have. This lift's 122 13/16" overall height is the whole reason it exists.
• You service wide-body work — duallys, lifted trucks, sprinter-style vans, wide-track commercial rigs — and standard-width lifts have you folding mirrors and inching past the columns every single time. The extra-wide baseplate gives those vehicles the door room to drive straight in.
• You're a fleet maintenance bay that lives at or near 14,000 lb daily and can't gamble on a lift rated right at the line. The full 14k capacity means your loaded service trucks go up with real margin to spare, not a prayer.
• You'd take a clearfloor lift if the room allowed it, but it doesn't — the ceiling settles the argument. A baseplate model is the only honest way to get heavy capacity into your space, and you're fine running an air hose over the cable channel.
• You're expanding capacity in an existing building and quoting a roof-raise to fit an overhead 14k lift would blow the whole project budget. Dropping in the F14X instead keeps the money in equipment, not construction.
• You bid heavy commercial and DOT inspection work and need the rated capacity on paper to win the jobs, but the shop you're working out of was never built for tall equipment. This lift lets you take the work without moving buildings.

What the SAE-F14X Is NOT Built For

• ❌ Shops that want a fully clear floor (baseplate runs across the floor)
• ❌ Light-duty car-only shops where a 10,000 lb lift is more economical

What Makes the SAE-F14X Different

Low-Ceiling Baseplate Design

The SAE-F14X routes its equalization cables across a floor-level baseplate instead of an overhead crossbar, which drops the overall height to just 122 13/16" — barely over ten feet. That single design choice is why this lift goes into bays a tall overhead 14k lift simply can't enter: converted retail spaces, older block garages, units with HVAC ducting overhead. For a shop boxed in by its ceiling, the baseplate isn't a compromise — it's the only way to get true heavy capacity under a low roof without quoting a roof-raise.

Capacity & Lift Height

The SAE-F14X delivers the full 14,000 lb capacity in a low-profile package, so your loaded service trucks, duallys, and one-ton rigs go up with real margin instead of riding a lift rated right at the edge. That's the rating fleet and DOT-inspection bays need on paper to win the work. The point is simple: you no longer choose between the capacity your daily mix demands and the ceiling you actually have — the F14X gives you both, lifting heavy without forcing a building project to make room for it.

Bay Fit & Clearance

With 129 15/16" inside the columns and an extra-wide 116 1/8" drive-thru, the SAE-F14X gives wide-track trucks, duallys, and work vans the door room to drive straight in — no folding mirrors or inching past the posts. Paired with the 122 13/16" overall height, it fits both the width and the height of a tight bay. Alamo checks your real ceiling and your widest rigs against these numbers before the lift ships, so the F14X fits the first time instead of becoming a freight return.

Included Adapters

Every SAE-F14X arrives complete with four adjustable rubber lift pads and four truck adapters — in the crate, not a follow-up parts hunt after the freight is signed for. The adjustable pads contact factory pickup points across a wide range of trucks and vans, and the truck adapters add the reach needed for the taller frames on heavy-duty rigs. Because the right hardware ships with the lift, the F14X is ready to safely raise your first wide-body truck the day the install is finished.

Power & Hydraulics

The SAE-F14X runs on a 4 HP, 220V single-phase motor protected by a 30-amp breaker — the same electrical class as a shop welder or rotary-screw compressor, so most existing shops need only a line run to the lift, not a panel upgrade. The hydraulic system uses standard AW32 or AW46 oil you likely already stock on the shelf. Common power and common oil keep install cost down and let a 14,000 lb lift slot into your shop's existing infrastructure instead of forcing an electrician's project on top of the purchase.

Full Specifications — SAE-F14X

Stratus Warranty — SAE-F14X

Stratus backs the SAE-F14X with comprehensive coverage. Every component is covered from the day it ships.

Warranty service is through Alamo Equipment & Service. When you buy from us, you are not waiting on a manufacturer hotline — call (844) 480-6059 and we handle it. Verify the model-specific warranty terms on the Stratus spec sheet at purchase.