Stratus Floor Plate Open 10k lbs Single Point Manual Release 2-Post Car Lift #SAE-F10P

Stratus SAE-F10P — 10,000 lbs 2-Post Lift

Shops with a 10-foot ceiling and a defined equipment budget need a lift that hits both constraints at once — low enough to fit, priced low enough to make sense. The Stratus SAE-F10P is built for that intersection: a 10,000 lb floor-plate 2-post at 111 1/4" overall height, priced at the value end of this batch's floor-plate lineup, with an 8-piece truck adapter set (four each at 2 3/4" and 4") that covers more vehicle heights than a smaller adapter kit.

The SAE-F10P's open-top floor plate keeps the design straightforward — the synchronization cable runs at floor level between the column bases, the trade-off that keeps the column short enough for a 10-foot bay. Single-point manual release and a top limiter switch round out the safety-release system. Stratus backs it with a 5-year structural, 3-year hydraulic, 2-year electrical warranty. Call Alamo at (844) 480-6059 to confirm your bay before ordering.

Who the SAE-F10P Is Built For

• The shop in a converted metal building or older commercial space where the ceiling measures right around 10 feet — the owner has already been turned away by two overhead-lift quotes and needs to know a floor-plate design is the actual path to 10,000 lb capacity, not just a downgrade
• A general-repair bay that sees everything from a customer's daily-driver sedan to an occasional loaded 3/4-ton truck — having both the 2 3/4" and 4" adapter heights on hand means the tech isn't stopping mid-job to hunt for the right extension
• The home-garage owner who bought a used floor-plate lift years ago, watched the cable stretch and the release get sloppy, and wants a lift with a real 5-year structural warranty this time instead of gambling on another worn secondhand unit
• A two-bay shop where the first bay is booked solid with oil changes and inspections and the owner is ready to add a second bay — but the quote has to make sense against the revenue that second bay will actually generate before the owner signs off
• The buyer who has three browser tabs open comparing 10K floor-plate lifts on spec sheets alone and needs the one number that actually matters: which lift gives the longest warranty term for the lowest price, without cutting a corner on either

What the SAE-F10P Is NOT Built For

• ❌ Shops with 13-foot or greater ceiling clearance — an overhead clearfloor design provides better floor access in those bays
• ❌ Shops requiring ALI/ETL certification — the SAE-F10P is CE certified, not ALI
• ❌ Bays where a completely clear floor between columns is operationally required

Questions about fit or capacity? Call Alamo at (844) 480-6059.

What Makes the SAE-F10P Different

10,000 lb Floor Plate — 111 1/4" Overall Height for 10-Foot Ceilings

The SAE-F10P's 111 1/4" (9' 3 1/4") overall height is built for bays where a standard overhead 10K 2-post — which needs 12 to 13 feet of clearance — simply won't fit. The floor plate design routes the synchronization cable at floor level between the columns, the structural trade-off that enables the reduced column height.

8-Piece Truck Adapter Set — Two Heights Included

The SAE-F10P ships with 8 truck adapters — four at 2 3/4" and four at 4" — giving the shop two adapter height options without a separate purchase. That's a more generous factory adapter package than several comparable value-tier floor-plate lifts, useful for shops that see a range of vehicle lift-point heights across sedans, crossovers, and light trucks.

CE-Certified Structure and Hydraulic System

The SAE-F10P's structure and hydraulic system are CE certified — independently tested at 115% dynamic and 150% static load capacity. Top limiter switch stops cylinder travel at the safe working stroke. Single-point manual release keeps the lowering procedure straightforward for shop-floor operation.

Open-Top Floor Plate Design

The open-top base plate connects the two columns at floor level and is anchored to the slab — vehicles drive over or around it during approach. It's not a raised ramp; it's the cable conduit that replaces the overhead bar found on taller 2-post designs. For low-ceiling bays, this is the practical trade-off that gets 10,000 lb capacity into a 10-foot space.

Stratus 5/3/2-Year Warranty — Value Price, Full Warranty Term

The SAE-F10P carries Stratus's full 5-year structural, 3-year hydraulic, 2-year electrical warranty — the same warranty term as every other Stratus lift in this batch, applied to the most value-priced floor-plate model. For a shop weighing price against warranty coverage, the SAE-F10P doesn't ask you to sacrifice one for the other. Alamo handles warranty service directly — call (844) 480-6059.

Full Specifications — SAE-F10P

Stratus Warranty — SAE-F10P

Stratus backs the SAE-F10P with a 5-year structural components warranty, 3-year hydraulic components warranty, and 2-year electrical parts warranty. This warranty applies to the full Stratus SAE 2-post lineup.

Warranty service is through Alamo Equipment & Service. When you buy from us, you are not waiting on a manufacturer hotline — call (844) 480-6059 and we handle it.