Tuxedo 9,000 lb Two Post Clear Floor - Symmetric #TP9KSCX

Tuxedo TP9KSCX — 9,000 lb Two Post Clear-Floor Lift, Symmetric

The Tuxedo TP9KSCX is a 9,000 lb capacity two-post clear-floor lift with a symmetric arm configuration — identical 31 in to 45 in reach on both front and rear arms — centering the vehicle evenly between the columns rather than offsetting it toward one end.

Overall height is 142-7/8 in with a 72 in max lift height, 113-5/8 in between columns, and 96 in of drive-thru clearance on a clear-floor design with no obstruction at ground level between the columns. Each arm is rated to 2,250 lb, and the lift runs on 220V, 20A single-phase power — identical footprint and capacity to the asymmetric TP9KACX, differing only in arm geometry.

It's built for general repair shops that prefer symmetric arm positioning — often simpler to set consistently across a variety of vehicles — as an alternative to the asymmetric TP9KACX at the same 9,000 lb capacity and footprint.

Who It's Built For

• ✅ General repair shops and dealerships that prefer symmetric, centered arm positioning
• ✅ Facilities servicing passenger vehicles and light trucks up to 9,000 lb
• ✅ Shops that want a clear-floor design for unobstructed tool and jack access

What It's NOT Built For

• ❌ Vehicles or loads exceeding 9,000 lb total or 2,250 lb per arm
• ❌ Shops that specifically want the door-clearance benefits of asymmetric arm geometry — see the TP9KACX

Questions about fit, freight, or capacity? Call Alamo at (817) 865-3707.

What Makes the TP9KSCX Different

Symmetric Arm Geometry

Identical 31 in to 45 in reach on both front and rear arms centers the vehicle evenly between the columns — often simpler to position consistently across different vehicles than an asymmetric layout.

9,000 lb Capacity, 2,250 lb Per Arm

Rated for 9,000 lb total with each of the four arms rated to 2,250 lb, identical to the TP9KACX.

Clear-Floor Design

No floor plate between the columns, keeping the bay floor open for jacks, tool carts, and creepers — shared with the TP9KACX but different from the floor-plate TP9KFX.

96 in Drive-Thru Clearance

Narrower drive-thru clearance than the TP10KAC-DX/TP11KC-DX/TP12KSC-DX lifts in this batch, fitting more compact bay widths.

Footprint

113-5/8 in between columns, 138 in overall width with power unit — confirm against your bay before ordering.

✅ Best For

• ✅ Shops that prefer symmetric, centered arm positioning
• ✅ General service bays lifting passenger vehicles and light trucks up to 9,000 lb
• ✅ Facilities with a more compact bay width than needed for the 10K–12K lift family

❌ Not Ideal For

• ❌ Loads over 9,000 lb total or 2,250 lb per arm — see the TP10KAC-DX, TP11KC-DX, or TP12KSC-DX for higher capacity
• ❌ Shops that specifically want asymmetric arm geometry for door clearance on their typical vehicle mix

TP9KSCX vs. TP9KACX vs. TP9KFX — Which 9,000 lb Two-Post Configuration Fits Your Bay?

All three share the same 9,000 lb capacity and 2,250 lb per-arm rating — the difference is arm geometry and floor configuration.

Choose the TP9KSCX for symmetric arm positioning on a clear floor; choose the TP9KACX for asymmetric geometry and possibly easier door clearance; choose the TP9KFX for a lower-profile floor-plate design if your ceiling height is limited. Call (817) 865-3707 to talk through which arm geometry fits your typical vehicle mix.

Full Specifications — TP9KSCX

Warranty — TP9KSCX

Tuxedo Distributors, LLC backs the TP9KSCX with a limited one-year warranty to the original purchaser, covering parts found defective in materials or workmanship under normal use.

There is no other express warranty on Tuxedo lifts; this warranty is exclusive of and in lieu of all other warranties, expressed or implied, including warranties of merchantability and fitness for a particular purpose. Warranty service is coordinated through Alamo Equipment & Service — call (817) 865-3707 and we handle it.