Skip to content
ORDERS SHIP FREE TO THE 48 CONTIGUOUS STATES
ORDERS SHIP FREE TO THE 48 CONTIGUOUS STATES
CALL OUR OFFICE (817) 865-3707 | EMAIL OUR TEAM
Challenger 7.7K Scissor/#DX77, Alamo Equipment, TX

Challenger 7.7K Scissor #DX77-SURF/FLUSH

SKU DX77-SURF
by Challenger
Save 36% Save 36%
$25,513.02
$25,513.02 - $25,730.24
$25,513.02
$16,328.33
$16,328.33 - $16,467.35
$16,328.33

  • DESCRIPTION

    Challenger engineered our 7,700 lb. capacity scissor lift with efficiency and productivity in mind. Our DX77 can easily lift all makes and models (within rated capacity) with a synchronized hydraulic system. The DX77 also offers free access all around the lifted vehicle and between platforms, with a cross-member free design providing an uncluttered and hazard-free work area. Choose to mount the DX77 either above ground or flush.

    Choose SURF or FLUSH mount.

    • Surface mounted double scissor lift with electric/hydraulic power control console. Includes (4) 1.5 in. rubber spotting blocks and (4) 3 in. rubber spotting blocks
    • Recessed/flush mounted double scissor lift with electric/hydraulic power control console. Includes recessed installation kit (DX77-FM) & hardware, (4) 1.5 in. rubber spotting blocks and (4) 3 in. rubber spotting blocks

    ALI/ETL certified.

    • FEATURES + BENEFITS

      • 7,700 lb. lifting capacity
      • 74.5” rise height (70″ if flush mounted)
      • Reinforced diamond-plate front and rear access ramps are designed to easily flip up and lock to extend the platform load length, which will accommodate longer wheelbase vehicles
      • Double scissor lifting for taller rise allows more overall working clearance
      • Single point air actuated lock release allows ergonomic working height for technicians to increase productivity and minimize fatigue
      • Power unit console includes three simple push-button controls
      • 3” rubber spotting blocks (set of 4) and 1.5” rubber spotting blocks (set of 4) included
      • Extended ramp kit available for low-profile vehicles
      • Powder coat finish provides long-lasting durability
      • Can be mounted above ground or flush

    • SPECIFICATIONS

      Model Number DX77
      Description
      		 Standard Open-Front Flat Deck
      Lifting Capacity 7,700 lbs.
      Raise Height 74.5”
      Overall Length 83.25”
      Overall Width 82”
      Platform Length 59”
      Platform Width 24.5”
      Width Between Platforms
      		 21 - 27”
      Ramp Length 11.75”
      Lowered Height 4.5”
      Motor 2HP, Single Phase, 60Hz
      Voltage 208/220v
      Air Supply Required 90 - 120 psi
      Speed of Rise 43 s
      Max Load per Platform 3,850 lbs.
      Colors Available Black
      Installation Standard

    • MANUAL + SPECS

Challenger Lifts, Inc. lifts are guaranteed to the original owner. CLI shall repair or replace, at CLI option, for the full warranty period those parts that prove upon inspection to be defective and pay for reasonable costs of transportation and/or labor for replacement of said parts for the warranty period stated below. This warranty shall not apply unless the product is installed, used and maintained according to CLI’s specifications set forth in CLI’s installation, operation and maintenance instructions. Use of any unapproved parts or accessories will void your warranty. This limited warranty extends only to the original purchaser and is not transferable. This warranty is valid only if the product has been registered with Challenger Lift, Inc., www.challengerlifts.com.

This warranty does not cover normal maintenance or adjustments, damage or malfunction caused by improper handling, installation, abuse, misuse, negligence, carelessness of operation, or normal wear and tear. In addition, this warranty does not cover equipment when repairs have been attempted or made by anyone other than a CLI authorized service representative.

This warranty is exclusive and is in lieu of all other warranties expressed or implied including any implied warranty of fitness for a particular purpose, which implied warranties are expressly excluded. No employee, agent, representative, dealer or other person or entity is authorized to give any warranties of any nature on behalf of CLI.

The remedies described are exclusive and in no event shall CLI, Inc. be liable for special, consequential or incidental damages for the breach of or delay in performance of the warranty. This warranty shall be governed by the Commonwealth of Kentucky, and shall be subject to the exclusive jurisdiction of the Court in the Commonwealth of Kentucky in the County of Jefferson. Functional parts are any wear items, as defined from time to time by Challenger Lifts. Examples include power units, cylinders, sheaves, hoses, cables, controls, etc. and may differ depending on the model of lift.

Structural parts are items, as defined from time to time by Challenger Lifts, Inc. that are not Functional Parts and include items like carriage, columns, arms, runways, plungers, etc. and may differ depending on the type of lift.

Note: WARRANTY CARD MUST BE COMPLETED AND RETURNED UPON INSTALLATION FOR VALIDATION or WARRANTY PERIOD WILL BEGIN FROM INVOICE DATE OF LIFT PURCHASE. WARRANTY MAY ALSO BE VALIDATED BY REGISTERING ONLINE @ www.challengerlifts.com/register-your-lift

Click here to enlarge Challenger Lift Warranty Chart

Discount on Selected Challenger Lifts

  • VLE10 - $300 off
  • SA10 -$300 off
  • LE12 - $450 off
  • E15 - $550 off
  • CL4P7S / CL4P9S/X/W - $300 - $400 off
  • MR6 - $350 off
  • CL10AV3 - $300 off
  • CL12A - $450 off
  • 4P14EFX/XFX - $450 off
  • SX14 - $1000 off
  • BT3000 - $1000 off
  • BT330 - $500 off

How to Redeem

1. Discount is applied in the cart.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare