5 Year Warranty
Rotationally Molded Plastic Spill Containment Products
For a period of five years from the date of purchase, if an UltraTech ROTATIONALLY MOLDED PLASTIC SPILL CONTAINMENT* PRODUCT proves defective in materials and workmanship during normal use by the purchaser of this product, UltraTech International, Inc. (“UltraTech”) will arrange for its replacement or repair. *This warranty does not apply to rotationally molded stormwater management or facility protection products. Please click here to see the list of products that are covered.
To receive repair or replacement, contact the distributor from which the product was originally purchased to initiate the process. All repairs and replacements must go through the distributor from which the product was purchased. If you are unable to determine the distributor you purchased from, please contact UltraTech customer service at 800-353-1611 or 904-292-1611. UltraTech reserves the right to require proof of purchase in conjunction with any such return.
This warranty does not apply to any products which have been subject to any misuse, including but not limited to products used with materials (primarily liquids) that are not recommended by the manufacturer in instructions furnished with the product or in published product descriptions; products which have been altered in any way by the user or used in a manner inconsistent with their intended use; products which have been subjected to severe treatment (excessive weight, exposure to severe weather, dropping, improper use and operation, misuse, etc.) not reasonably associated with “ordinary” usage.
This warranty is limited to the original owner or its direct assignee. The parties agree that the validity, operation and performance of this warranty and the rights of the parties hereunder shall be governed by and interpreted in accordance with the laws of the state of Florida, and the federal laws of the United States of America applicable therein (without regard to its or their choice or conflicts of laws principles), and the parties do expressly and irrevocably submit to the jurisdiction of courts of the Middle District of Florida with respect to any matter or claim, suit, action or proceeding arising under or related to this warranty.
THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. THIS LIMITED WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR USE OR PURPOSE, AND THE IMPLIED WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE. IN NO EVENT SHALL ULTRATECH BE LIABLE FOR ANY LOSS OF PROFITS OR ANY INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF ANY SUCH DEFECT IN MATERIAL OR WORKMANSHIP. IN NO EVENT, WHETHER FOR BREACH OF THIS LIMITED WARRANTY, NEGLIGENCE OR FOR ANY OTHER CAUSE, SHALL ULTRATECH BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES OF ANY KIND, INCLUDING, BUT NOT LIMITED TO, DAMAGE TO ANY OTHER PROPERTY OR FOR ANY INJURIES OR DAMAGES SUSTAINED BY ANY PERSON(S) OR ANY SPECIAL DAMAGES OF ANY KIND WHATSOEVER. NO REPRESENTATIVE, EMPLOYEE OR AGENT OF ULTRATECH, ITS DISTRIBUTOR OR ANY OTHER PERSON HAS AUTHORITY TO ASSUME OR BIND ULTRATECH FOR ANY ADDITIONAL LIABILITY OR RESPONSIBILITY IN CONNECTION WITH THE PRODUCT BEYOND THAT SET FORTH HEREIN, UNLESS SPECIFICALLY AUTHORIZED IN WRITING BY THE CEO OR PRESIDENT OF ULTRATECH.
When a warranty claim is being made, the party making the claim will need to provide sufficient information regarding the claim that will include, but not be limited to; photographic evidence, written statements regarding the claim, and contact details to allow follow-up. It is important the claimant does not dispose of the product in question until approved to do so by UltraTech in writing, to allow the warranty claim process to be properly followed and for UltraTech to inspect the defective product.
How do you get spillage out of the sump?
We recommend using a pump (UltraTech part# 2345 can be used) to remove any spilled contents from the sump. (Note: spillage should be pumped into an approved container).
How does the ramp connect to the decks?
The Ultra-Spill Deck Ramp (part# 1089) comes complete with two steel clips that quickly install on the end of the ramp. These clips hook onto the connecting spill deck and keep the ramp from moving or shifting during loading or unloading. NOTE: The ramp is not designed to be used with the P1 spill decks or the short side of the P2 spill decks.
I need to add another spill deck to the one I already have. How do I do that? What do I need?
Other than the spill deck, you’ll need one bulkhead fitting (part# 1073) and one t-strip (part# 1131) for every 26” of spill deck length that is connected. For example, if you’re connecting a 4-drum spill deck to another 4-drum spill deck you would need two bulkhead fittings and two t-strips. If, on the other hand, you were connecting a 1-drum spill deck to the short end of a 2-drum spill deck, you would only need one each of the bulkhead fitting and t-strip.
The spill deck that I bought previously does not have any holes to put the bulkhead fitting through. Can I drill holes myself?
Yes. All that is required is a 1 9/16” hole saw (1 ½” will also work). On each side of the Ultra-Spill Decks are “dimpled” areas that indicate where holes are to be drilled. Center the hole saw in the area you need to be drilled and carefully cut the hole(s) for your bulkhead fittings. File or “flame” any rough or sharp edges prior to connecting.
What are sidewall plugs for?
Sidewall plugs (part# 2221) can be used if you are no longer connecting a spill deck and therefore have a hole that needs to be plugged.
Can the spill decks be moved with a forklift or pallet jack?
The spill deck can NOT be moved with a forklift or pallet jack. The design of the spill deck sidewalls sometimes leads users to think that it is forkliftable or able to be moved with a pallet jack. But what may appear to be forklift pockets are actually supports for the grating.
Is the deck slip resistant?
Yes, all grating surfaces on the spill decks are slip resistant.
What does a t-strip do?
The t-strips lay across the point where two spill decks come together. By “bridging the gap” this piece diverts spills to either of the decks and keeps any spillage from getting between the units.
How many bulkhead fittings and t-strips do I need?
One bulkhead fitting and one t-strip for each 26” of spill deck that is being connected.
Does the Ultra-Spill Deck’s sump capacity meet regulations?
(Note: The answer to this question is based on one assumption: That the spill decks are being used with 55-gallon drums). By themselves, the 1-drum, 2-drum and 4-drum spill decks do not meet EPA requirements. They must be connected to a bladder or another Ultra-Spill Deck to increase the total sump capacity to 55 gallons minimum.
What is the size of the grating?
All spill decks use a grating that is 48″L x 24″W x 2.5″H or 24″L x 24″W x 2.5″H.
