APlusLift 10,000LB 2-Post Floor Plate Heavy Duty Car Lift #HW-10KBP-A

APlusLift HW-10KBP-A — 10,000 lbs 2-Post Lift

A lot of shops have the vehicle volume to justify a second or third bay but not the ceiling clearance to fit a standard overhead 2-post. The APlusLift HW-10KBP-A is the 10,000 lb floor plate lift built for that situation — a 113 5/8" overall column height (under 9 feet 6 inches) that fits in a 10-foot ceiling shop where every overhead 2-post design is ruled out. The floor plate design routes the synchronization cable across the floor between the bases instead of an overhead bar, which is the structural trade-off that allows the low column profile.

The HW-10KBP-A uses the same double-S column and combo symmetric/asymmetric arm assembly as the HW-10KOH-A, with the floor plate base substituted for the overhead crossbar. That gives shops the same arm flexibility — lift a sedan asymmetrically, a truck symmetrically — in a form factor that works under a 10-foot ceiling. APlusLift backs it with a 3-year parts warranty and maintains parts availability. Call Alamo at (844) 480-6059 to confirm your bay measurements before ordering.

Who the HW-10KBP-A Is Built For

• The home garage shop owner with a 10-foot ceiling that rules out every overhead 2-post option — the HW-10KBP-A's 9' 5" column height is the path to 10K capacity in a low-ceiling bay
• Small commercial shops with older or non-standard ceiling clearance who need 10,000 lb lifting capacity without a facility modification
• Shops upgrading from a 2-post floor plate that's hit its service life and need a like-for-like replacement at a value price with a longer warranty
• Technicians who have a floor plate lift in a bay already and understand the cable-floor trade-off — this is the correct replacement category
• Budget-conscious operations adding a dedicated light-vehicle bay where low ceiling height dictates the floor plate design regardless of preference

What the HW-10KBP-A Is NOT Built For

• ❌ Shops requiring ALI/ETL certification — the HW-10KBP-A is CE certified; choose an ALI-certified 10K alternative for compliance requirements
• ❌ Bays where a completely clear floor between columns is required — the floor plate cable runs between the bases
• ❌ Shops with adequate ceiling height (12'+) where an overhead clearfloor design would serve better

Questions about fit or capacity? Call Alamo at (844) 480-6059.

What Makes the HW-10KBP-A Different

Low-Ceiling 10,000 lb Platform — 113 5/8" Overall Height

The HW-10KBP-A's defining spec is its column height: 113 5/8" (9' 5 5/8") overall. That's the height that makes a 10,000 lb 2-post accessible to shops with 10-foot ceilings — bays where every overhead 2-post design requires a 12-foot minimum clearance and simply won't fit. The floor plate design routes the synchronization cable between the column bases rather than through an overhead bar, which is what keeps the column profile below the standard overhead-design threshold.

Combo Symmetric and Asymmetric Arms in a Floor-Plate Package

The HW-10KBP-A carries the same combo arm assembly as the overhead HW-10KOH-A — both symmetric and asymmetric loading from the same arm set, with adjustable screw pads for lift point height variation. In a low-ceiling bay where the floor plate design was already required, having both symmetric and asymmetric capability in the same arm assembly avoids the choice between a single-configuration symmetric lift and a two-arm-swap asymmetric setup.

CE-Certified Structure — 115% Dynamic, 150% Static Load Testing

The HW-10KBP-A's structure and hydraulic system are CE certified — independently tested at 115% of the rated 10,000 lb dynamic load capacity and 150% static load capacity. CE certification documents structural integrity against the rated load. Double-point safety lock release prevents descent unless both columns release simultaneously. Automatic arm lock restraints hold the arms in extended position throughout the service period.

Double-S Column Design — Load Distribution at Reduced Height

APlusLift's double-S column cross-section distributes the 10,000 lb load across the column profile more evenly than a standard box column of the same height. At 113 5/8" total height, a column that carries 10K capacity needs structural geometry to compensate for the reduced height-to-section ratio — the double-S profile addresses that without requiring the column dimensions to increase to the point where the lift no longer fits a low-ceiling bay.

APlusLift 3-Year Parts Warranty — Replacement Parts Available

APlusLift's 3-year parts warranty applies to all components on the HW-10KBP-A. Parts are in inventory and available — APlusLift calls this out explicitly: they don't use recycled materials on wear components like cylinder seal rings, and replacement parts are stocked for their active lift models. Alamo coordinates parts procurement under warranty. Call (844) 480-6059 for warranty service questions.

Full Specifications — HW-10KBP-A

APlusLift Warranty — HW-10KBP-A

APlusLift backs the HW-10KBP-A with a 3-year parts warranty for all car lifts — sourced from the official APlusLift website (apluslift.com). APlusLift publishes a flat parts warranty without a component-level breakdown; the 3-year term covers all covered components for the full warranty period.

Warranty service is through Alamo Equipment & Service. When you buy from us, you are not waiting on a manufacturer hotline — call (844) 480-6059 and we handle it.