Atlas® PRO7000ST 7,000 lb. Super-Tall 4-Post Lift #ATEXH-PRO7000ST-FPD

SKU: ALMATLATEXHPRO7000STFPD
Regular price $9,999.00
In stock
Usually ships within 24 hours
📚 Manuals & Resources
Need installation help? Call Alamo at (844) 480-6059 — we install, service, and inspect every lift we sell.
Quick Specs
Model / Part Number ATEXH-PRO7000ST-FPD
Capacity 7,000 lbs
Lift Type 4-Post super-tall storage & service lift
Lifting Configuration Single-point pneumatic lock release (external air supply required), lock-ladder design
Overall Height 162" (13' 6")
Minimum Ceiling Height 13' 9"
Overall Width 123" with motor / 110 1/2" without (10' 3" / 9' 2 1/2")
Drive-Thru Clearance See runway length for drive-through clearance
Rise Height 147" (12' 3") to top of runway
Motor / Electrical 220V single phase, 30A breaker required
Concrete / Floor Requirement Standard reinforced slab — confirm exact PSI/depth with Alamo before install
🔧 Will the PRO7000ST Fit Your Bay?
Check your bay against these numbers. Close on any of them? Call us before you order.
CEILING HEIGHT
162" (13' 6")
overall lift height
BAY WIDTH
123" with motor / 110 1/2" without (10' 3" / 9' 2 1/2")
overall floor width
MAX VEHICLE WEIGHT
7,000 lbs
rated capacity
📞 Not sure if your bay clears? Call Alamo at (844) 480-6059 and we will walk through your measurements before you order.
🏗 Site Prep — What Your Bay Needs Before Install Day
Have these three things ready and your install day is a half-day job. Don’t have them? Call us first — we’ll help you plan.
🧱 Floor / Concrete
  • Standard reinforced slab — confirm exact PSI/depth with Alamo before install
  • Verify with Alamo before ordering
⚡ Power
  • 220V single phase, 30A breaker required
  • Have an electrician confirm your circuit before install day
📐 Ceiling
  • Plan for 162" (13' 6") overall lift height
  • Measure to lowest obstruction, not peak
🔨 Alamo Installs Every Lift We Sell
We show up, anchor it, wire it, and hand you the keys. One number. One invoice. No coordinating contractors, no guessing if it’s done right.
📞 (844) 480-6059
Talk to Alamo’s install team

Atlas PRO7000ST — 7,000 lbs 4-Post super-tall storage & service lift

A garage that stores two vehicles stacked vertically needs more than an ordinary 4-post lift — it needs real height. The Atlas PRO7000ST is a 7,000 lb super-tall 4-post lift with a 162" lift height, built specifically to store or service a vehicle above another one parked underneath. Call Alamo at (844) 480-6059 to confirm your ceiling clears it before ordering.

Who the PRO7000ST Is Built For

  • Collectors and shops maximizing vertical garage storage where the 162" lift height genuinely stacks a vehicle above another one parked underneath
  • Facilities with tall ceilings (13' 9" or more) that want to store or service a car above another vehicle rather than choosing between the two
  • Buyers who want 21 locking positions for fine height control across a wide range of service and storage heights
  • Garage owners who have already confirmed their ceiling height meets the PRO7000ST's minimum requirement and want to maximize that vertical space
  • Collectors running out of floor space who need a real second parking level rather than an off-site storage solution

What the PRO7000ST Is NOT Built For

  • ❌ Shops with standard 8-10 foot ceilings — the PRO7000ST needs nearly 14 feet of clearance
  • ❌ Buyers needing more than 7,000 lb capacity — step up to the PRO9000

Questions about fit or capacity? Call Alamo at (844) 480-6059.

What Makes the PRO7000ST Different

162" Lift Height for True Vertical Storage

Rated for 7,000 lbs with a 162" (13' 6") overall lift height and 147" (12' 3") of rise to the top of the runway, the PRO7000ST is built to genuinely stack a vehicle above another one — not just lift for service.

21 Locking Positions for Precise Height Control

Twenty-one locking positions give you fine control over exactly where the platform stops, whether you're parking a vehicle at full height for storage or dropping to a mid-range position for service work.

Air-Operated Release for a Tall, Heavy Platform

A single-point pneumatic lock release (external air supply required) keeps operation manageable on a lift this tall. The PRO7000ST runs on 220V single-phase power with a 30A breaker required, and needs a standard reinforced slab — confirm exact PSI and depth with Alamo.

Atlas Warranty, Alamo Service

The PRO7000ST carries Atlas's 2-year structural / 1-year hydraulic parts-only warranty. Every claim runs through Alamo — call (844) 480-6059 for service or warranty questions.

A 13' 9" Ceiling Requirement — Measure First

At 123" wide with the motor (110 1/2" without) and a 13' 9" minimum ceiling requirement, the PRO7000ST is not a lift you retrofit into a standard garage. Measure your ceiling height precisely and call Alamo before ordering.

✅ Best For
  • ✅ Collectors and shops maximizing vertical garage storage — the 162" lift height stacks a vehicle underneath
  • ✅ Facilities with tall ceilings (13'9"+) that want to store or service a car above another vehicle
  • ✅ Buyers who want 21 locking positions for fine height control
❌ Not Ideal For
  • ❌ Shops with standard 8-10 foot ceilings — the PRO7000ST needs nearly 14 feet of clearance
  • ❌ Buyers needing more than 7,000 lb capacity — step up to the PRO9000

PRO7000ST vs. Atlas PRO9000 (9,000 lb) — Which Lift Is Right for Your Shop?

Decision Point PRO7000ST Atlas PRO9000 (9,000 lb)
Capacity 7,000 lbs 9,000 lbs
Height Super-tall 162" for max vertical storage Extra wide/tall/long, 9,000 lb capacity
Best fit Maximum stacked-vehicle storage height Larger vehicles + higher capacity

Choose the PRO7000ST when maximum lifting height for stacked vehicle storage is the priority. Choose the PRO9000 when you need higher 9,000 lb capacity with extra width and length. Both stay inside Alamo’s catalog — call (844) 480-6059.

Full Specifications — PRO7000ST

Model / Part Number ATEXH-PRO7000ST-FPD
Capacity 7,000 lbs
Lift Type 4-Post super-tall storage & service lift
Lifting Configuration Single-point pneumatic lock release (external air supply required), lock-ladder design
Overall Height 162" (13' 6")
Minimum Ceiling Height 13' 9"
Overall Width 123" with motor / 110 1/2" without (10' 3" / 9' 2 1/2")
Drive-Thru Clearance See runway length for drive-through clearance
Rise Height 147" (12' 3") to top of runway
Motor / Electrical 220V single phase, 30A breaker required
Concrete / Floor Requirement Standard reinforced slab — confirm exact PSI/depth with Alamo before install
Warranty 2-year structural / 1-year hydraulic — parts only
Runway Length 194" (16' 2")
Runway Width 21" w/rails or 20" driving surface
Locking Positions Under Runway 23" through 142" in 6" increments (21 positions)
Shipping Weight 2,866 lbs

⚠️ Installation Requirements

  • Ceiling height: Plan for 162" (13' 6") overall lift height; measure to the lowest obstruction.
  • Electrical: 220V single phase, 30A breaker required; consult an electrician for exact breaker sizing.
  • Floor / Concrete: Standard reinforced slab — confirm exact PSI/depth with Alamo before install.
  • Bay width: Confirm 123" with motor / 110 1/2" without (10' 3" / 9' 2 1/2") floor width clearance; measure before ordering.
  • Surface anchoring: Anchor per manufacturer specification where applicable — do not skip anchoring on production bays.
  • Installation: Alamo installs every lift we sell. Call (844) 480-6059 to schedule.

Atlas Warranty — PRO7000ST

Atlas backs the PRO7000ST with its published warranty terms for this model — verified from Atlas’s own product documentation (manufacturer-web source). Coverage varies by model in the Atlas standard car lift line; the terms below are specific to the PRO7000ST and should not be assumed to apply to other Atlas models.

Component Coverage Term
Structural components 2 years
Hydraulic components 1 year
Wear items & accessories Not covered (consumable, parts-only warranty)

Warranty service is through Alamo Equipment & Service. When you buy from us, you are not waiting on a manufacturer hotline — call (844) 480-6059 and we handle it.

❓ Frequently Asked Questions — PRO7000ST

Is the Atlas PRO7000ST ALI certified?

The PRO7000ST is commercial-grade; the live Atlas source does not list ALI certification.

What ceiling height does the PRO7000ST need?

This is the tallest lift in the Atlas standard car lift lineup at 162" (13' 6") overall height — plan for at least 13'9" of clearance to the lowest obstruction.

Does the PRO7000ST need compressed air?

Yes — the pneumatic single-point lock release requires an external air supply.

How many locking positions does the PRO7000ST have?

21 locking positions from 23" to 142" in 6" increments, giving very fine control over storage height.

Why Buy the PRO7000ST from Alamo Equipment & Service?

  • We install it. Every Atlas PRO7000ST we sell can be professionally installed by our team — including verifying your ceiling clearance before we anchor a lift this tall.
  • We service it. Need support after install? Call (844) 480-6059 — you reach the team that installed it, not a manufacturer hotline.
  • We size it with you. Not sure if your 13' 9"+ ceiling actually clears the PRO7000ST's 162" tall profile? Call and we will confirm before you order — this measurement cannot be guessed.
  • Free shipping. The PRO7000ST ships free to all 48 contiguous states.
  • Expert comparison help. Not sure if you need the PRO7000ST's extreme height over the standard PRO9000? Call (844) 480-6059 — we will help you confirm what your ceiling and storage goals actually require.

A shop buying from a pure e-commerce retailer gets a box. A shop buying from Alamo gets a partner.

  • Free shipping on all parts within the continental United States.
  • Most orders ship within 24–48 hours.
  • Tracking information will be emailed once your order ships.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)