Atlas® TC755EZ & WB49-2-PRO Combo Package #ATETCWB-COMBO4-FPD
Couldn't load pickup availability
| Combo Part Number | ATETCWB-COMBO4-FPD |
| Machine 1 | Atlas® TC755EZ Tire Changer with E-Z Assist Arm |
| Machine 2 | Atlas® WB49-2-PRO Computerized Wheel Balancer |
| Combo Price | $7,999.00 |
Atlas® TC755EZ & WB49-2-PRO Combo Package
Every shop hits the same wall on stubborn low-profile and performance tires: a standard tilt-back changer can seat the bead, but the tech is muscling the tire onto the rim by hand the whole way, and that adds up to wasted minutes and strained shoulders on every job.
The TC755EZ & WB49-2-PRO combo steps up from the base TC755 pairing with an E-Z assist arm built into the tire changer for extra leverage on difficult tire-and-rim combinations, plus a wheel balancer with automatic 3D data entry built in standard — no add-on gauge needed to measure width and offset on every wheel.
Who This Combo Is Built For
- A shop where techs are muscling stubborn low-profile and performance tires onto the rim by hand on the base TC755 — the E-Z assist arm on this model adds the leverage that turns a 2-person, 10-minute wrestling match into a 1-person job
- A high-volume commercial shop measuring wheel width and offset by hand on every job because it didn't want to pay extra for an add-on 3D gauge — the WB49-2-PRO builds that capability in standard, no add-on required
- A shop that's run the base TC755 long enough to know exactly where it struggles — stubborn low-profile tires — and is ready to pay for the assist-arm upgrade that fixes that specific pain point
- A shop where the same tech does 15+ tire changes a day and stubborn tires are visibly slowing them down and wearing them out by mid-shift — assist-arm leverage reduces that physical toll job after job
- A shop juggling a daily mix of alloy wheels, low-profile tires, SUVs, and light trucks where no single job looks the same — this combo's flexibility (leverage on tough tires, 3D entry on alloy wheels) covers that variety without swapping equipment
- A shop that already likes the TC755's tilt-back footprint and clearance but keeps hitting its leverage limit on tougher jobs — same familiar machine, more capability where it actually matters
What This Combo Is NOT Built For
Shops on a tighter budget that don't need the E-Z assist arm or 3D data entry — the TC755 & WB49-2 combo covers the same tire range without the step-up price.
What's Included in This Combo
Atlas® TC755EZ Tire Changer with E-Z Assist Arm
- E-Z assist arm adds leverage for difficult low-profile and performance tire combinations
- Tilt-back column design plus built-in beadblaster for fast, controlled bead seating
- Extra-large turntable and adjustable 3-position jaws handle a wide passenger/light-truck range
Atlas® WB49-2-PRO Computerized Wheel Balancer
- Automatic 3D data entry included standard — no add-on gauge needed for width/offset measurement
- Split-weight function hides weights behind spokes on alloy wheels
- Auto start/stop when the hood is raised/lowered — no separate footswitch step
- High-volume shops running frequent low-profile, alloy, or performance tire jobs
- Facilities that want automatic 3D data entry standard, not as an optional add-on
- Shops on a tighter budget that don't need assist-arm leverage — the TC755 & WB49-2 combo covers the same tire range for less
- Heavy-duty truck wheels beyond passenger/light-truck range — see the truck-rated combos
Buy the Combo vs. Buy Separately
| Item | Individual Price |
|---|---|
| Atlas® TC755EZ Tire Changer with E-Z Assist Arm | N/A — sold only as part of this combo package |
| Atlas® WB49-2-PRO Computerized Wheel Balancer | N/A — sold only as part of this combo package |
| This Combo Package | $7,999.00 |
Not sure if this combo or the individual machines fit your shop better? Call (844) 480-6059 and we'll help you decide.
Full Specifications
Atlas® TC755EZ Tire Changer with E-Z Assist Arm — TC755EZ
| Dimensions | 80" L × 60" W × 46" H |
| Weight | 1,200 lbs. |
| UPC | 810524029063 |
| Country of Origin | China |
| External Locking Rim Dimensions | 11 7/8" to 27 7/8" |
| Internal Locking Rim Dimensions | 13 7/8" to 29 7/8" |
| Maximum Tire Diameter | 47" |
| Maximum Wheel Width (Bead Breaker) | 18" |
| Table Motor | 1 HP |
| Turntable Rotating Torque | 885 ft/lbs. |
| Bead Breaker | 5,500 lb. Force |
| Air Requirement | 90–110 PSI (do not exceed 140 PSI) |
| Electric Requirement | 110V |
| Shipping Weight | 700 lbs. |
Atlas® WB49-2-PRO Computerized Wheel Balancer — WB49-2-PRO
| Max Tire Diameter | 39" |
| Rim Sizes (Cars & Light Trucks) | 10"–32" (manual entry may be required over 23") |
| Rim Width | 1 1/2"–20" |
| Shaft Size | 40mm |
| Max Wheel Weight | 150 lbs. |
| Balancing Speed | 150 RPM |
| Data Entry | Automatic 3D (special width-measuring gauge included) |
| Measurement | Standard or Metric |
| Accuracy | 1 gram |
| Weight Position Resolution | 1.4 Degrees |
| Self Calibrating | Yes |
| Motor | 1/4 Horsepower |
| Electric Requirement | 110V |
| Shipping Weight | 400 lbs. |
⚠️ Setup Requirements
- Power: Confirm your shop's electrical service matches both machines' power requirements before ordering — they may differ.
- Air supply: Confirm shop compressed-air capacity meets each machine's air pressure requirement (where applicable).
- Floor space: Confirm clear floor space for both machines plus operator clearance on all working sides.
- Setup help: Call (844) 480-6059 with any setup or first-use questions.
Warranty — Both Machines
Each machine in this combo carries its own manufacturer warranty terms.
| Item | TC755EZ Tire Changer |
| Parts | 1 Year |
| Labor | Not included — parts-only coverage |
| Item | WB49-2-PRO Wheel Balancer |
| Parts | 1 Year |
| Labor | Not included — parts-only coverage |
Warranty service is coordinated through Alamo Equipment & Service. Call (844) 480-6059 with any warranty question.
⚠️ Confirm exact terms at the time of purchase.
Frequently Asked Questions
Why Buy This Combo from Alamo Equipment & Service?
- We service both machines. When something needs attention after the sale, we're the same people you call for either machine — not two separate manufacturer hotlines.
- We help you size the combo right. This pairing handles up to a 47" tire diameter on the changer side and up to 150 lbs. wheel weight on the balancer side, with the E-Z assist arm and automatic 3D data entry both built in — tell us your typical wheel mix and we'll confirm it's the right fit before you order.
- Free shipping. Both machines delivered to your shop, no hidden freight fees.
- Expert comparison help. Not sure if this combo or the individual machines are the right fit? Call (844) 480-6059 — we'll walk you through it.
A shop buying from a pure e-commerce retailer gets two boxes. A shop buying from Alamo gets a partner for both machines.
Shipping Information:
Customers may pick up their lift at the nearest freight terminal at no additional cost.
You will need to provide your own trailer. Terminal staff will safely load the lift onto your trailer. The RECEIVER/CUSTOMER is solely responsible for properly securing the load for transport.
To schedule a pickup, contact us at info@alamoequipment.com or
(844) 480-6059. Please include the lift model and your zip code so we can direct you to the appropriate terminal.
Atlas Warranty Information
- 5-Year Structural Warranty
- 2-Year Hydraulic-Power Warranty