Challenger 15K Heavy-Duty 2-Post 2-Stage Front & Rear Arms #E15

Challenger E15 — 15,000 lbs 2-Post Lift

There's a category of vehicle that a 12K lift can lift — legally, on paper — but shouldn't be lifting routinely. Fully loaded F-350s, Ram 3500 dually pickups, Transit-350 cargo vans, and medium-duty fleet vehicles often come in at 12,000 to 14,000 lbs in service condition. Putting that load on a 12K lift every day isn't just running at capacity — it's running at the edge of it. The Challenger E15 is the 15,000 lb answer: a heavy-duty 2-stage arm clearfloor lift for shops that service vehicles where 12K doesn't leave enough margin.

The E15 is ALI/ETL certified at 15,000 lbs, installs in two column height configurations (14' 6" or 16' 6"), and reaches 36.5" to 55" with its 2-stage front and rear arms — covering the lift point range across heavy pickups, vans, and commercial equipment. For dealerships, fleet service centers, and general shops that run heavy trucks through the same bays as passenger vehicles, the E15 gives those heavier vehicles the lift they're supposed to be on.

Who the E15 Is Built For

• The truck-heavy shop that's been using a 12K lift at its rated limit on F-350s and Ram 3500s — the E15 gives those vehicles 3,000 lbs of margin back and takes the risk off the lift
• Commercial fleet operators servicing Transit-350s, Sprinter 2500s, and medium-duty delivery trucks that exceed 12K GVWR in service condition
• Dealerships that run a dedicated heavy-duty bay and want 2-post simplicity — easier approach, faster rotation, no runway setup like a 4-post
• Repair centers that need ALI/ETL documentation at the 15K level for insurance, OSHA compliance, or franchise/dealership standards
• Mixed service bays that handle both passenger cars and heavy work trucks — the E15's 2-stage arms cover the lift point range from sedans to dually pickups without a complete arm reconfiguration

What the E15 Is NOT Built For

• ❌ Shops that primarily service passenger cars and light SUVs — the E15 requires 14' 7" to 16' 7" ceiling clearance and is sized for heavy-duty use
• ❌ Low-ceiling bays under 14' 7" — no configuration of the E15 fits below that threshold
• ❌ Operations where 10,000 lb or 12,000 lb capacity covers the full vehicle mix — the SA10 or CL12A series are the right choices at lower price points

What Makes the E15 Different

15,000 lb Capacity — For the Vehicles That Outgrow 12K

The E15 is built for shops where the vehicle mix has grown beyond what a 12K lift should handle. At 15,000 lb capacity, it covers heavy-duty pickups (F-350, Ram 3500, Silverado HD), full-size commercial vans, and fleet vehicles that routinely exceed 12,000 lbs in service condition. Running a heavier vehicle on a 12K lift creates a load margin problem; the E15 eliminates it by giving 3,000 lbs back.

2-Stage Front & Rear Arms — 36.5" to 55" Reach

Heavy-duty 2-stage front and rear arms reach from 36.5" to 55" — covering the range of lift point positions on commercial vans, heavy pickups, and long-wheelbase trucks where standard-reach arms fall short. The arm reach is tuned for heavier vehicles whose lift points sit further out from the column centerline. Symmetric loading keeps the vehicle balanced between the columns throughout the lift cycle.

Two Column Height Configurations

The E15 installs at 14' 6" or 16' 6" overall — two height configurations based on your bay's ceiling clearance and the tallest vehicles you need to service. The shorter configuration suits bays with standard commercial ceilings and most truck service. The taller configuration adds working headroom for vehicles with higher ground clearance or when accessing upper-chassis components requires more room above the vehicle.

ALI/ETL Certified for Heavy-Duty Commercial Service

The E15 carries ALI/ETL certification at the 15,000 lb level — independently verified against ANSI/ALI ALCTV safety standards. For commercial shops, fleet operations, and dealerships where lift certification is a compliance requirement or insurance mandate, the E15 provides that documentation on Challenger's heavy-duty platform. Challenger's manufacturer specs table lists ALI/ETL Certified = Yes explicitly.

Clearfloor 2-Post Format for Fast Vehicle Rotation

The E15 is a clearfloor 2-post — no runway, no ramp, no floor obstruction between the columns. Vehicles drive straight in, position under the arms, and lift in a single motion. In a commercial shop running heavy trucks all day, the clearfloor format means faster vehicle entry and exit per cycle compared to a 4-post with runways. Alamo installs the E15 and keeps it running — call (844) 480-6059 to get started.

Full Specifications — E15

Challenger Warranty — E15

Challenger backs the E15 with comprehensive coverage per the official Challenger warranty terms published at challengerlifts.com.

Warranty service is through Alamo Equipment & Service. When you buy from us, you are not waiting on a manufacturer hotline — call (844) 480-6059 and we handle it. Wear items and accessories carry 90-day coverage per the Challenger warranty terms.